(2024) Frank & Lillian Gilbreth Award, presented by IISE.
(2024) 2024 Book-of-the-Year Award, presented by IISE/Joint Publishers for the Maynard’s Industrial & Systems Engineering Handbook, 6th Edition.
(2024) Best Application Paper, IISE Transactions, “Reconstructing Original Designs: Process Planning for Reverse Engineering”.
(2024) Fulbright-Nehru Scholar (2024-2025), Fulbright Commission, U.S. Department of State.
(2023) Lillian Gilbreth Award, presented by the Indian Institution of Industrial Engineering (IIIE).
(2023) Invited Keynote, International Conference of Production Research (27th ICPR), Cluj-Napoca, Romania.
(2023) Invited Keynote, International Joint Conference in Industrial Engineering & Operations Management, Lisbon, May 2023 (joint conference between the Brazilian, Portuguese, Spanish IE societies).
(2022) Keynote speaker, BkTSi (Indonesia) – Annual Gathering of IE Department Heads & Faculty (2022).
(2021 - 2022) President, Institute of Industrial & Systems Engineers (IISE) (2021-2022).
(2019) Recipient, Carnegie Science Center Award for Leadership and Career and Technical Education.
(2019 - 2022) Editor-in-Chief, Maynard’s Industrial & Systems Engineering Handbook, Sixth Edition (2019-2022) (130 chapters with authors from 29 different countries).
(2018) Keynote Speaker, IISE (Asian Network), Annual Conference, Taichung, Taiwan.
(2016) Keynote speaker, Workshop on Global Engineering Education, Uninove, Sao Paolo, Brazil.
(2014) Chancellors Award for Distinguished Public Service, University of Pittsburgh.
(2014) Keynote Speaker, 1st International Conference on Industrial, Systems and Manufacturing Engineering, Amman, Jordan.
(2014) Invited Keynote Speaker, Asian Network of Industrial Engineering Conference, Xian.
(2014) Invited Plenary Speaker, (ICIEOM 2014), Malaga, Spain.
(2013) Albert Holzman Distinguished Educator Award, conferred by the Institute of Industrial Engineers.
(2012) International Federation of Engineering Education Societies (IFEES) Award for Global Excellence in Engineering Education, Buenos Aires.
(2012) John Imhoff Award for Global Excellence in Industrial Engineering Education, presented by the American Society of Engineering Education (ASEE).
(2012) Invited keynote speaker, 17th biennial National Israeli Engineering & Management Conference, Tel Aviv.
(2011) Invited keynote speaker, 53rd National Convention of the Indian Institution of Industrial Engineering, New Delhi.
(2011) Invited keynote speaker, International Conference of Industrial Engineering & Operations Management, Belo Horizonte, Brazil.
(2011) Invited Plenary Speaker, Indian Science Congress, 'Educating the Indian Scientist/Engineer of 2025: Challenges & Opportunities.
(2006) Board of Trustees, Institute of Industrial Engineers.
(2005) Chair, Council of Industrial Engineering Academic Department Heads (CIEADH). This council represents IE department heads across the United States and in many other countries..
(2005) Faculty Honor Roll (2005), School of Engineering, University of Pittsburgh. Award for Outstanding Professor (voted by students).
(2004) Senior Specialist, (J. Fulbright-Hays Foundation & U.S. Department of State), The Universidad de Montevideo (Fall 2004)..
(2004) Carnegie Science Center Award for Higher Education (Honorable Mention), for developing an innovative, interdisciplinary course in Product Realization along with faculty members from Electrical Engineering & Mechanical Engineering..
(2003) Member of the Board, International Foundation for Production Research.
(2002) Fellow of the Institute of Industrial Engineers.
(2001) First IE Doctoral Colloquium, Developed the concept. Then planned and implemented the colloquium in 2001..
(1998) IIE Outstanding Dissertation Award, Evaluation Committee.
(1996) Outstanding Professor Award, Ind. Engr., Univ of Pittsburgh, (voted by students).
(1995 - 1999) Whiteford Faculty Fellow.
(1993 - 1994) The Board of Visitors Award - awarded to a single faculty member each year for outstanding Research Productivity and Service.
(1992 - 1993) Awarded Wyllys G. Stanton Award (2nd place nationally).
(1991 - 1992) Student Chapter, IIE: Awarded 7th place nationally.
(1991 - 1995) The Alcoa Manufacturing Systems Faculty Fellow.
(1990 - 1991) Student Chapter, IIE: Awarded 13th place nationally.
(1988 - 1989) Student Chapter, IIE: Awarded 11th place nationally.
(1987 - 1988) Student Chapter, IIE: Awarded 12th place nationally.
Ph.D., Industrial and Management Systems Engineering, The Pennsylvania State University, 1987
M.S., Science & Technology, Western Carolina University, 1983
B.S., Electrical Engineering, National Institute of Technology (ex KREC - Surathkal, University of Mysore), 1976
Geng, Z., Sabbaghi, A., & Bidanda, B. (2023). Reconstructing original design: Process planning for reverse engineering. IISE TRANSACTIONS, 55(5), 509-522.Taylor & Francis. doi: 10.1080/24725854.2022.2040761.
Geng, Z., Sabbaghi, A., & Bidanda, B. (2023). Automated variance modeling for three-dimensional point cloud data via Bayesian neural networks. IISE TRANSACTIONS, 55(9), 912-925.Taylor & Francis. doi: 10.1080/24725854.2022.2106389.
Munoz-Valencia, A., Aridi, J.O., Barnes, L.S., Rudd, K.E., Bidanda, B., Epuu, T., Kamu, R., Kivuli, T., Macleod, J., Makanga, C.M., Makin, J., Mate, M., Muiru, C.N., Murithi, G., Musa, A., Nyagol, H., Ochieng, K., Rajgopal, J., Raykar, N.P., Tian, Y., Yazer, M.H., Zeng, B., Olayo, B., Kumar, P., & Puyana, J.C. (2023). Protocol: identifying policy, system, and environment change interventions to enhance availability of blood for transfusion in Kenya, a mixed-methods study. BMC HEALTH SERVICES RESEARCH, 23(1), 963.Springer Nature. doi: 10.1186/s12913-023-09936-0.
Delaney, M., Telke, S., Zou, S., Williams, M.J., Aridi, J.O., Rudd, K.E., Puyana, J.C., Kumar, P., Appiah, B., Dei-Adomakoh, Y., Asamoah-Akuoko, L., Olayemi, E., Singogo, E., Hosseinipour, M.C., M'baya, B., Chipeta, E., Reilly, C., Investigators, B.P., Kamu, R., Aridi, J., Munoz-Valencia, A., Raykar, N., Barnes, L., Makin, J., Bidanda, B., Yazer, M.H., MacLeod, J., Muiri, C.N., Olayo, B., Murithi, G., Rajgopal, J., Tian, Y., Zeng, B., Kivuli, T., Mate, M., Musa, A., Mical, C., Nyagol, H., Ochieng, K., Epuu, T., Kuma, A.B.A., Segbefia, C., Yawson, A., Adu-Afarwuah, S., Adongo, P., Acquah, M., Tancred, T., Dei, E.N., Bates, I., Ofori-Acquah, S., Ansah, J.K., John-Teye, D., Cohn, C., Chu, H., Burns, A., Croal, M., Eckroth, K., Van Ryn, C., Chiwindo, T., Mwapasa, V., Muula, A., Mhango, P., Kayira, P., Likaka, A., Dzama, W., Nsamala, N., Kadewere, G., & Joshua, M. (2022). The BLOODSAFE program: Building the future of access to safe blood in Sub-Saharan Africa. TRANSFUSION, 62(11), 2282-2290.Wiley. doi: 10.1111/trf.17091.
Geng, Z., & Bidanda, B. (2022). Tolerance estimation and metrology for reverse engineering based remanufacturing systems. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 60(9), 2802-2815.Taylor & Francis. doi: 10.1080/00207543.2021.1904158.
Geng, Z., Sabbaghi, A., & Bidanda, B. (2022). A framework of tolerance specification for freeform point clouds and capability analysis for reverse engineering processes. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 60(24), 7475-7491.Taylor & Francis. doi: 10.1080/00207543.2022.2086083.
Geng, Z., & Bidanda, B. (2021). Geometric precision analysis for Additive Manufacturing processes: A comparative study. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 69, 68-76.Elsevier. doi: 10.1016/j.precisioneng.2020.12.022.
Raykar, N.P., Makin, J., Khajanchi, M., Olayo, B., Munoz Valencia, A., Roy, N., Ottolino, P., Zinco, A., MacLeod, J., Yazer, M., Rajgopal, J., Zeng, B., Lee, H.K., Bidanda, B., Kumar, P., Puyana, J.C., & Rudd, K. (2021). Assessing the global burden of hemorrhage: The global blood supply, deficits, and potential solutions. SAGE OPEN MEDICINE, 9, 20503121211054995.SAGE Publications. doi: 10.1177/20503121211054995.
Sherwin, M., & Bidanda, B. (2021). Effects of Pedagogical Changes to an Engineering Capstone Design Course During COVID-19. 2021 ASEE Virtual Annual Conference Content Access.ASEE.
Chen, Z., & Bidanda, B. (2019). Sustainable manufacturing production-inventory decision of multiple factories with JIT logistics, component recovery and emission control. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, 128, 356-383.Elsevier. doi: 10.1016/j.tre.2019.06.013.
Lai, X., Chen, Z., & Bidanda, B. (2019). Optimal decision of an economic production quantity model for imperfect manufacturing under hybrid maintenance policy with shortages and partial backlogging. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 57(19), 6061-6085.Taylor & Francis. doi: 10.1080/00207543.2018.1562249.
Chen, Z., Fu, K., & Bidanda, B. (2018). Instant production-replenishment and coordination mechanism for short life cycle and deteriorating item with stock-dependent demand. International Journal of Systems Science Operations & Logistics, 5(1), 45-59.Taylor & Francis. doi: 10.1080/23302674.2016.1240253.
Camillus, J.C., Bidanda, B., & Mohan, N.C. (2017). The Business of Humanity, Strategic Management in the Era of Globalization, Innovation, and Shared Value. 1-173.Taylor & Francis. doi: 10.4324/9781315277622.
Chen, Z., Chen, C., & Bidanda, B. (2017). Optimal inventory replenishment, production, and promotion effect with risks of production disruption and stochastic demand. Journal of Industrial and Production Engineering, 34(2), 79-89.Taylor & Francis. doi: 10.1080/21681015.2016.1233912.
Geng, Z., & Bidanda, B. (2017). Review of reverse engineering systems - current state of the art. VIRTUAL AND PHYSICAL PROTOTYPING, 12(2), 161-172.Taylor & Francis. doi: 10.1080/17452759.2017.1302787.
Luangkesorn, K.L., Klein, G., & Bidanda, B. (2016). Analysis of production systems with potential for severe disruptions. International Journal of Production Economics, 171, 478-486.Elsevier. doi: 10.1016/j.ijpe.2015.09.014.
Basu, S., & Bidanda, B. (2014). Shortcomings of eco-labelling of construction and building materials. In Eco-efficient Construction and Building Materials. (pp. 151-165).Elsevier. doi: 10.1533/9780857097729.1.151.
Ross, B.T., & Bidanda, B. (2014). A brief history of health systems engineering - its early years through 1989: An industrial engineering perspective. IISE Transactions on Healthcare Systems Engineering, 4(4), 217-229.Taylor & Francis. doi: 10.1080/19488300.2014.966214.
Chun, Y., & Bidanda, B. (2013). Sustainable manufacturing and the role of the International Journal of Production Research. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 51(23-24), 7448-7455.Taylor & Francis. doi: 10.1080/00207543.2012.762135.
Nof, S.Y., Cheng, G.J., Weiner, A.M., Chen, X.W., Bechar, A., Jones, M.G., Reed, C.B., Donmez, A., Weldon, T.D., Bermel, P., Bukkapatnam, S.T.S., Cheng, C., Kumara, S.R.T., Bement, A., Koubek, R., Bidanda, B., Shin, Y.C., Capponi, A., Lee, S., Lehto, M.R., Liu, A.L., Nohadani, O., Dantus, M., Lorraine, P.W., Nolte, D.D., Proctor, R.W., Sardesai, H.P., Shi, L., Wachs, J.P., & Zhang, X.C. (2013). Laser and Photonic Systems Integration: Emerging Innovations and Framework for Research and Education. HUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES, 23(6), 483-516.Wiley. doi: 10.1002/hfm.20555.
Desai, S., Bidanda, B., & Lovell, M.R. (2012). Material and process selection in product design using decision-making technique (AHP). EUROPEAN JOURNAL OF INDUSTRIAL ENGINEERING, 6(3), 322-346.Inderscience Publishers. doi: 10.1504/EJIE.2012.046666.
Wu, S., Shuman, L.J., Bidanda, B., Balaban, C.D., & Sochats, K. (2012). A hybrid modelling framework to simulate disaster response decisions. International Journal of Advanced Intelligence Paradigms, 4(1), 83.Inderscience Publishers. doi: 10.1504/ijaip.2012.046968.
Hu, G., Wang, L., & Bidanda, B. (2011). A game theory model for analysing market competition in sustainable manufacturing industry. International Journal of Sustainable Manufacturing, 2(2/3), 161.Inderscience Publishers. doi: 10.1504/ijsm.2011.042150.
Dietsch, J., & Madhavan, R. (2010). Industrial Robots. 17, (pp. 6-+).Tab Professional and Reference Books (Division of McGraw-Hill).
Dhawan, A., Srinivasan, S., Rajib, P., & Bidanda, B. (2009). Minimising total cost with regular and emergency outsourcing sources: a neuro-dynamic programming approach. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 47(20), 5811-5827.Taylor & Francis. doi: 10.1080/00207540802144168.
Hu, G., & Bidanda, B. (2009). Modeling sustainable product lifecycle decision support systems. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 122(1), 366-375.Elsevier. doi: 10.1016/j.ijpe.2009.06.011.
Bártolo, P., & Bidanda, B. (2008). Bio-Materials and Prototyping Applications in Medicine. In Bártolo, P., & Bidanda, B. (Eds.). 1-216.Springer US. doi: 10.1007/978-0-387-47683-4.
Bártolo, P.J., Almeida, H.A., Rezende, R.A., Laoui, T., & Bidanda, B. (2008). Advanced Processes to Fabricate Scaffolds for Tissue Engineering. In Virtual Prototyping & Bio Manufacturing in Medical Applications. (pp. 149-170).Springer Nature. doi: 10.1007/978-0-387-68831-2_8.
Bidanda, B., & Bártolo, P. (2008). Virtual Prototyping & Bio Manufacturing in Medical Applications. In Bidanda, B., & Bártolo, P. (Eds.). 1-299.Springer US. doi: 10.1007/978-0-387-68831-2.
Bunce, M.M., Wang, L., & Bidanda, B. (2008). Leveraging Six Sigma with industrial engineering tools in crateless retort production. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 46(23), 6701-6719.Taylor & Francis. doi: 10.1080/00207540802230520.
Desai, S., Bidanda, B., & Bártolo, P. (2008). Metallic and Ceramic Biomaterials: Current and Future Developments. In Bio-Materials and Prototyping Applications in Medicine. (pp. 1-14).Springer Nature. doi: 10.1007/978-0-387-47683-4_1.
Hu, G., Wang, L., Fetch, S., & Bidanda, B. (2008). A multi-objective model for project portfolio selection to implement lean and Six Sigma concepts. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 46(23), 6611-6625.Taylor & Francis. doi: 10.1080/00207540802230363.
Bidanda, B., Arisoy, O., & Shumah, L.J. (2006). Offshoring manufacturing: Implications for engineering jobs and education: A survey and case study. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 22(5-6), 576-587.Elsevier. doi: 10.1016/j.rcim.2005.11.006.
Bidanda, B., Arisoy, O., & Shuman, L.J. (2006). Colombia & the New Global Economy: Implications of Tratado de Libre Comercio for Colombian Industry, Engineers & Engineering Educators. Revista de ingenieria, 24, 83-90.
Bidanda, B., Arisoy, O., & Shuman, L.J. (2006). Offshoring Manufacturing: Implications for engineering jobs and education: A survey and case study. Robotics and Computer Integrated Manufacturing, 22(6), 576-587.
Creehan, K.D., & Bidanda, B. (2006). Computer-aided reverse engineering of the human musculoskeletal system. Virtual and Physical Prototyping, 1(2), 83-91.Taylor & Francis. doi: 10.1080/17452750600648478.
Creehan, K.D., & Bidanda, B. (2006). Computer-aided reverse engineering of the human musculoskeletal system. Virtual and Physical Prototyping, 1(2), 83-91.Informa UK Limited. doi: 10.1080/17452750600648478.
Puthpongsiriporn, T., Porter, J.D., Bidanda, B., Wang, M.E., & Billo, R.E. (2006). Attribute-level neighbor hierarchy construction using evolved pattern-based knowledge induction. IEEE TRANSACTIONS ON KNOWLEDGE AND DATA ENGINEERING, 18(7), 917-929.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/TKDE.2006.104.
Bidanda, B., Ariyawongrat, P., Needy, K.L., Norman, B.A., & Tharmmaphornphilas, W. (2005). Human related issues in manufacturing cell design, implementation, and operation: a review and survey. COMPUTERS & INDUSTRIAL ENGINEERING, 48(3), 507-523.Elsevier. doi: 10.1016/j.cie.2003.03.002.
Bidanda, B., Ariyawongrat, P., Needy, K.L., Norman, B.A., & Tharmmaphornphilas, W. (2005). Human Related Issues in Manufacturing Cell Design, Implementation, and Operation: A Review & Survey. International Journal of Computers & Industrial Engineering, (48), 507-523.
Süer, G.A., & Bidanda, B. (2005). Special Issue:: Group Technology/Cellular Manufacturing -: Preface. COMPUTERS & INDUSTRIAL ENGINEERING, 48(3), 447.Elsevier. doi: 10.1016/j.cie.2004.12.013.
Bidanda, B., & Bartolo, P. (2004). Guest Editorial - Product Development. International Journal of Product Development, 1(2).
Bidanda, B., & Desai, S. (2004). Strategic planning models for prototyping and product development centres. International Journal of Product Development, 1(2), 133.Inderscience Publishers. doi: 10.1504/ijpd.2004.005701.
Needy, K.L., Nachtmann, H., Roztocki, N., Warner, R.C., & Bidanda, B. (2003). Implementing Activity-Based Costing Systems in Small Manufacturing Firms: A Field Study. Engineering Management Journal, 15(1), 3-10.Taylor & Francis. doi: 10.1080/10429247.2003.11415190.
Needy, K.L., Norman, B.A., Bidanda, B., Ariyawongrat, P., Tharmmaphornphilas, W., & Warner, R.C. (2002). Assessing Human Capital: A Lean Manufacturing Example. Engineering Management Journal, 14(3), 35-39.Taylor & Francis. doi: 10.1080/10429247.2002.11415171.
Norman, B.A., Needy, K.L., Bidanda, B., & Ariyawongrant, W.P. (2002). Assessing human capital: A lean manufacturing example. Engineering Management Journal, 14(4), 35-39.
Norman, B.A., Tharmmaphornphilas, W., Needy, K.L., Bidanda, B., & Warner, R.C. (2002). Worker assignment in cellular manufacturing considering technical and human skills. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 40(6), 1479-1492.Taylor & Francis. doi: 10.1080/00207540110118082.
Carnahan, B., Warner, R.C., Bidanda, B., & Needy, K.L. (2000). Predicting glass furnace output using statistical and neural computing methods. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 38(6), 1255-1269.Taylor & Francis. doi: 10.1080/002075400188834.
Needy, K.L., Bidanda, B., & Gulsen, M. (2000). A Model To Develop, Assess, and Validate an Activity-Based Costing System for Small Manufacturers. Engineering Management Journal, 12(1), 31-38.Taylor & Francis. doi: 10.1080/10429247.2000.11415061.
Bidanda, B., Kadidal, M., & Billo, R.E. (1998). Development of an intelligent castability and cost estimation system. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 36(2), 547-568.Taylor & Francis. doi: 10.1080/002075498193886.
Bidanda, B., Soyster, A., & Sadowski, R. (1998). A call to join IE practitioners and academics. IIE SOLUTIONS, 30(5), 8.
Cohen, Y., Bidanda, B., & Billo, R.E. (1998). Accelerating the generation of work measurement standards through automatic speech recognition: a laboratory study. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 36(10), 2701-2715.Taylor & Francis. doi: 10.1080/002075498192445.
Petri, K.L., Billo, R.E., & Bidanda, B. (1998). A neural network process model for abrasive flow machining operations. JOURNAL OF MANUFACTURING SYSTEMS, 17(1), 52-64.Elsevier. doi: 10.1016/S0278-6125(98)80009-5.
Bidanda, B., & Billo, R.E. (1996). Parametric design and NC code generation of countersink cutting tools. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 9(2), 105-112.Taylor & Francis. doi: 10.1080/095119296131724.
Billo, R., Bidanda, B., & Tate, D. (1996). A Genetic Cluster Algorithm for the Machine Component Grouping Problem. Journal of Intelligent Manufacturing, 7(3), 1-13.
Billo, R.E., Bidanda, B., & Tate, D. (1996). A genetic cluster algorithm for the machine-component grouping problem. JOURNAL OF INTELLIGENT MANUFACTURING, 7(3), 229-241.Springer Nature. doi: 10.1007/BF00118082.
Billo, R.E., Bidanda, B., Cohen, Y., Fei, C.Y., & Petri, K.L. (1996). Performance standards and testing of two-dimensional bar code systems for overhead scanning. JOURNAL OF MANUFACTURING SYSTEMS, 15(5), 305-315.Elsevier. doi: 10.1016/0278-6125(96)84193-8.
Billo, R.E., Needy, K.L., & Bidanda, B. (1996). Challenges facing information technology to support world class manufacturing. COMPUTERS IN INDUSTRY, 28(2), 163-165.Elsevier. doi: 10.1016/0166-3615(95)00041-0.
Cleland, D., Bidanda, B., & Chung, C. (1996). Human Issues in Technology Implementation - Part 2. Industrial Management, 37(5), 15-16.
Wilhelm, M., Smith, A.E., & Bidanda, B. (1996). Integrating an Expert System and a Neural Network for Process Planning. Engineering Design and Automation, 1(4), 259-269.
Bidanda, B., & Billo, R.E. (1995). On the Use of Students for Developing Engineering Laboratories. Journal of Engineering Education, 84(2), 205-213.Wiley. doi: 10.1002/j.2168-9830.1995.tb00167.x.
BILLO, R.E., & BIDANDA, B. (1995). REPRESENTING GROUP TECHNOLOGY CLASSIFICATION AND CODING TECHNIQUES WITH OBJECT-ORIENTED MODELING PRINCIPLES. IIE TRANSACTIONS, 27(4), 542-554.Taylor & Francis. doi: 10.1080/07408179508936770.
Cleland, D.I., Bidanda, B., & Chung, C. (1995). Human Issues in Technology Implementation - Part 1. Industrial Management, 37(4), 22-27.
BIDANDA, B., & HOSNI, Y.A. (1994). REVERSE ENGINEERING AND ITS RELEVANCE TO INDUSTRIAL-ENGINEERING - A CRITICAL-REVIEW. COMPUTERS & INDUSTRIAL ENGINEERING, 26(2), 343-348.Elsevier. doi: 10.1016/0360-8352(94)90067-1.
Billo, R., Bidanda, B., & Kharbanda, P. (1994). Re-Engineering Process Plans for Effective Manufacturing Cell Formation. International Journal of Manufacturing Systems Design, 1(3), 217-229.
BILLO, R.E., & BIDANDA, B. (1994). A STUDENT ADVISING SYSTEM FOR UNDERGRADUATE ENGINEERING CURRICULAR SCHEDULING. COMPUTERS & EDUCATION, 22(3), 205-213.Elsevier. doi: 10.1016/0360-1315(94)90001-9.
MARTINEZ, S.E., SMITH, A.E., & BIDANDA, B. (1994). REDUCING WASTE IN CASTING WITH A PREDICTIVE NEURAL MODEL. JOURNAL OF INTELLIGENT MANUFACTURING, 5(4), 277-286.Springer Nature. doi: 10.1007/BF00123699.
Motavalli, S., & Bidanda, B. (1994). Modular Software Development for Digitizing Data Analysis in Reverse Engineering. Computers and Industrial Engineering Journal, 26(2), 395-410.
MOTAVALLI, S., & BIDANDA, B. (1994). MODULAR SOFTWARE-DEVELOPMENT FOR DIGITIZING SYSTEMS DATA-ANALYSIS IN REVERSE ENGINEERING APPLICATIONS - CASE OF CONCENTRIC ROTATIONAL PARTS. COMPUTERS & INDUSTRIAL ENGINEERING, 26(2), 395-410.Elsevier. doi: 10.1016/0360-8352(94)90073-6.
REDFERN, M.S., & BIDANDA, B. (1994). SLIP RESISTANCE OF THE SHOE FLOOR INTERFACE UNDER BIOMECHANICALLY-RELEVANT CONDITIONS. ERGONOMICS, 37(3), 511-524.Taylor & Francis. doi: 10.1080/00140139408963667.
BENBRAHIM, S., SMITH, A.E., & BIDANDA, B. (1993). RELATING PRODUCT SPECIFICATIONS AND PERFORMANCE DATA WITH A NEURAL-NETWORK MODEL FOR DESIGN IMPROVEMENT. JOURNAL OF INTELLIGENT MANUFACTURING, 4(6), 367-374.Springer Nature. doi: 10.1007/BF00123950.
BIDANDA, B., NARAYANAN, V., & RUBINOVITZ, J. (1993). COMPUTER-AIDED-DESIGN-BASED INTERACTIVE OFF-LINE PROGRAMMING OF SPRAY-GLAZING ROBOTS. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 6(6), 357-365.Taylor & Francis. doi: 10.1080/09511929308944587.
Bidanda, B., Rubinovitz, J., & Narayanan, V. (1993). CAD-Based Interactive Off-line Programming of Spray Glazing Robots. International Journal of Computer Integrated Manufacturing, 6(6), 357-365.
Rajgopal, J., & Bidanda, B. (1993). On the Use of Statistical Design in Manufacturing Engineering Education. International Journal of Applied Engineering Education, 8(4).
Bidanda, B., Shuman, L., & Puerzer, R. (1992). On Teaching CAD Concepts to Industrial Engineers. Engineering Design Graphics Journal, 56(2), 11-18.
NARAYANAN, V., BIDANDA, B., & RUBINOVITZ, J. (1992). ON THE DEVELOPMENT OF COMPUTER-BASED PATH PLANNING STRATEGIES FOR ROBOTIC SPRAY GLAZING. COMPUTERS & INDUSTRIAL ENGINEERING, 23(1-4), 15-18.Elsevier. doi: 10.1016/0360-8352(92)90053-M.
BIDANDA, B., MOTAVALLI, S., & HARDING, K. (1991). REVERSE ENGINEERING - AN EVALUATION OF PROSPECTIVE NONCONTACT TECHNOLOGIES AND APPLICATIONS IN MANUFACTURING SYSTEMS. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 4(3), 145-156.Taylor & Francis. doi: 10.1080/09511929108944490.
Motavalli, S., & Bidanda, B. (1991). Development of a Part Image Reconstruction System for Reverse Engineering of Design Modifications. Journal of Manufacturing Systems, 10(5).
MOTAVALLI, S., & BIDANDA, B. (1991). A PART IMAGE-RECONSTRUCTION SYSTEM FOR REVERSE ENGINEERING OF DESIGN MODIFICATIONS. JOURNAL OF MANUFACTURING SYSTEMS, 10(5), 383-395.Elsevier. doi: 10.1016/0278-6125(91)90056-8.
RAJGOPAL, J., & BIDANDA, B. (1991). ON SCHEDULING PARALLEL MACHINES WITH 2 SETUP CLASSES. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 29(12), 2443-2458.Taylor & Francis. doi: 10.1080/00207549108948095.
BIDANDA, B., & RAJGOPAL, J. (1990). OPTIMAL SELECTION OF WORKHOLDING DEVICES FOR ROTATIONAL PARTS. IIE TRANSACTIONS, 22(1), 65-72.Taylor & Francis. doi: 10.1080/07408179008964159.
Bidanda, B., Motavalli, S., & Patterson, G. (1990). On the development of an integrated computer system for cephalometric analyses. Journal of Medical Systems, 14(1-2), 1-16.Springer Nature. doi: 10.1007/bf00995876.
Bidanda, B., Motavalli, S., & Patterson, G.P. (1990). On the Development of a Computerized System for Cephalometric Analysis. Journal of Medical Systems, 14(1).
Bidanda, B., & Cleland, D. (1989). Techniques to Assess Project Feasibility. Project Management Journal, 20(2).
BIDANDA, B., RUBINOVITZ, J., & RAMAN, S. (1989). DEVELOPMENT OF A SPATTER INDEX FOR AUTOMATED WELDING INSPECTION USING COMPUTER VISION. COMPUTERS & INDUSTRIAL ENGINEERING, 16(2), 215-224.Elsevier. doi: 10.1016/0360-8352(89)90140-X.
Knott, K., Bidanda, B., & Pennebaker, D. (1988). The Economics of Robotic Welding. The International Journal of Production Research, 26(1).
KNOTT, K., BIDANDA, B., & PENNEBAKER, D. (1988). ECONOMIC-ANALYSIS OF ROBOTIC ARC-WELDING OPERATIONS. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 26(1), 107-117.Taylor & Francis. doi: 10.1080/00207548808947844.
Bidanda, B., & Knott, K. (1987). Roadblocks to Robotic Welding. Journal of Methods-Time Measurement, 8.
Thayer, C. Surgical services optimization: first case starts and turnover time. University of Pittsburgh.
Geng, Z., & Bidanda, B. (2019). Volumetric data analysis: Inspection and experimental design for additive manufacturing. In Proceedings - 34th ASPE Annual Meeting, (pp. 491-496).
Bidanda, B., & Geng, Z. (2016). Emerging trends in reverse engineering. In Proceedings of the International Conference on Progress in Additive Manufacturing, Part F129095, (pp. 2-7).
Gong, J., Luangkesorn, L., & Bidanda, B. (2015). Evaluating performance tradeoffs in a production and inventory system with production disruptions using Markov chain models. In 23rd International Conference for Production Research, ICPR 2015.
Hu, G., Wang, L., Chen, Y., & Bidanda, B. (2014). An oligopoly model to analyze the market and social welfare for green manufacturing industry. In JOURNAL OF CLEANER PRODUCTION, 85, (pp. 94-103).Elsevier. doi: 10.1016/j.jclepro.2014.01.016.
Bucheli, V., Calderón, J.P., González, F., Bidanda, B., Valdivia, J.A., & Zarama, R. (2013). Model to support the information retrieval process of the scientific production at departmental-level or faculty-level of universities. In Proceedings of ISSI 2013 - 14th International Society of Scientometrics and Informetrics Conference, 2, (pp. 1225-1235).
Gaussin, M., Hu, G., Abolghasem, S., Basu, S., Shankar, M.R., & Bidanda, B. (2013). Assessing the environmental footprint of manufactured products: A survey of current literature. In INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, 146(2), (pp. 515-523).Elsevier. doi: 10.1016/j.ijpe.2011.12.002.
Luangkesorn, K.L., Klein, G., & Bidanda, B. (2013). Analysis of Production Systems with potential for severe disruptions. In 22nd International Conference on Production Research, ICPR 2013.
Abolghasem, S., Guiping, H., Bidanda, B., & Shankar, M.R. (2012). Sustainable Design and Manufacturing by Mapping Microstructure from Severe Shear Deformation in Machining. In IFAC-PapersOnLine, 45(6), (pp. 1278-1283).Elsevier. doi: 10.3182/20120523-3-ro-2023.00059.
Cohen*, Y., Wang, M.E., & Bidanda, B. (2010). Automatic Translation of a Process Level Petri-Net to a Ladder Diagram. In Advanced Techniques in Computing Sciences and Software Engineering, (pp. 25-29).Springer Nature. doi: 10.1007/978-90-481-3660-5_5.
Cohen, Y., Wang, M.E., & Bidanda, B. (2010). Transition Network for Automation Modeling: A Case Study. In Technological Developments in Networking, Education and Automation, (pp. 187-192).Springer Nature. doi: 10.1007/978-90-481-9151-2_32.
Storch, R., Bidanda, B., Hlutkowsky, R., Kramer, B., Amy Martens, P.E., & Freund, L. (2009). Industry advisory committees - Support to university IE departments. In IIE Annual Conference and Expo 2009.
Cohen, Y., Wang, M.E., & Bidanda, B. (2008). A modeling technique for execution and simulation of discrete automation. In Novel Algorithms and Techniques in Telecommunications, Automation and Industrial Electronics, (pp. 273-277).Springer Nature. doi: 10.1007/978-1-4020-8737-0_49.
Shengnan, W., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., & Balaban, C. (2008). Agent-based discrete event simulation modeling for disaster responses. In IIE Annual Conference and Expo 2008, (pp. 1908-1913).
Shuman, L., Bidanda, B., Besterfield-Sacre, M., & Rajgopal, J. (2008). Internationalizing the engineering curriculum. In IIE Annual Conference and Expo 2008, (pp. 1071-1076).
Wu, S., Shuman, L., Bidanda, B., Prokopyev, O., Kelley, M., Sochats, K., & Balaban, C. (2008). Simulation-based decision support system for real-time disaster response management. In IIE Annual Conference and Expo 2008, (pp. 58-63).
Cohen, Y., Wang, M.E., & Bidanda, B. (2007). Modeling and implementation of agent-based discrete industrial automation. In Innovative Algorithms and Techniques in Automation, Industrial Electronics and Telecommunications, (pp. 535-540). doi: 10.1007/978-1-4020-6266-7-97.
Guiping, H., Lizhi, W., Bidanda, B., & Fetch, S. (2007). Project portfolio selection for implementing Lean and Six Sigma concepts. In IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, (pp. 1581-1586).
Hamza, H., Wang, Y., & Bidanda, B. (2007). Modeling total cost of ownership utilizing interval-based reliable simulation technique in reverse logistics management. In IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, (pp. 523-529).
Hu, G., Wang, L., Bidanda, B., & Wang, Y. (2007). A new model for closed-loop product lifecycle systems. In IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, (pp. 1660-1665).
Lizhi, W., Guiping, H., & Bidanda, B. (2007). A game theoretic model of the market competition between green and ordinary products. In IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, (pp. 530-535).
Wu, S., Shuman, L., Bidanda, B., Kelley, M., Sochats, K., & Balaban, C. (2007). Disaster policy optimization: A simulation based approach. In IIE Annual Conference and Expo 2007 - Industrial Engineering's Critical Role in a Flat World - Conference Proceedings, (pp. 872-877).
Wu, S., Shuman, L.J., Bidanda, B., Kelley, M., Lawson, B., Sochats, K., & Balaban, C.D. (2007). System Implementation Issues of Dynamic Discrete Disaster Decision Simulation System (D4S2) - Phase I. In 2007 Winter Simulation Conference, (pp. 1127-1134).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/wsc.2007.4419712.
Arisoy, O., & Bidanda, B. (2006). Multi-expert multi-criteria decision making in outsourcing. In 2006 IIE Annual Conference and Exhibition.
Arisoy, O., Mehmet Gokhan, N., Needy, K.L.S., & Bidanda, B. (2006). Activity based costing and life cycle costing in outsourcing decision analysis. In 2006 IIE Annual Conference and Exhibition.
Hu, G., Wang, Y., & Bidanda, B. (2006). PLM systems for network-centric manufacturing. In 2006 IIE Annual Conference and Exhibition.
Hu, G., Wang, Y., & Bidanda, B. (2006). Product lifecycle management challenges in trans-national environments. In 2006 IIE Annual Conference and Exhibition.
Lai, J.P., Shuman, L.J., Bidanda, B., & Lai, C. (2006). A surrogate objective approach to simulation optimization. In 2006 IIE Annual Conference and Exhibition.
Bidanda, B., Shuman, L., Thomes, K., & Arisoy, O. (2005). Adapting engineering coursework for increased global relevance. In ASEE Annual Conference and Exposition, Conference Proceedings, (pp. 165-173).
Billo, R., Helvie, D., Puthpongsiriporn, T., & Bidanda, B. (2005). Dynamic part grouping for fluctuating demand products. In IIE Annual Conference and Exposition 2005.
Creehan, K.D., & Bidanda, B. (2005). Computer aided reverse engineering of human tissues. In Virtual Modelling and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping, (pp. 155-160).
Norman, B.A., Besterfield-Sacre, M., Bidanda, B., Needy, K.L.S., & Rajgopal, J. (2005). Integration and synthesis of the industrial engineering curriculum via an unstructured problem solving course. In ASEE Annual Conference and Exposition, Conference Proceedings, (pp. 8481-8489).
Shuman, L.J., Bidanda, B., Thomes, K., & Feick, L. (2005). The global and societal challenge - An innovative approach to abet criterion 3.H and beyond. In ASEE Annual Conference and Exposition, Conference Proceedings, (pp. 6899-6914).
Bidanda, B., & Desai, S. (2004). Product realization & engineering learning: A preliminary evaluation. In IIE Annual Conference and Exhibition 2004, (p. 2413).
Norman, B.A., Besterfield-Sacre, M., Bidanda, B., Needy, K.L.S., & Rajgopal, J. (2004). A conceptual model for integrating and synthesizing the industrial engineering curriculum. In ASEE Annual Conference Proceedings, (pp. 2261-2272).
Norman, B.A., Besterfield-Sacre, M., Bidanda, B., Needy, K.L.S., & Rajgopal, J. (2004). Integration and synthesis of the industrial engineering curriculum. Industrial Engineering Research Conference.Houston, TX.
Sunanta, O., & Bidanda, B. (2004). A comparison of manual and mechanical lapping methods on valve reconditioning. In IIE Annual Conference and Exhibition 2004, (pp. 2339-2343).
Bidanda, B., Desai, S., & Lovell, M. (2003). The business of virtual and rapid prototyping. In Virtual Modelling and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping, (pp. 91-95).
Needy, K.L., & Bidanda, B. (2002). Successfully partnering with industry through the industrial engineering senior design project. In ASEE Annual Conference Proceedings, (pp. 7873-7880).
Rafe, G.E., Needy, K.L.S., Bidanda, B., & Schmidt, T.M. (2001). Delivering continuous manufacturing education and training via an internet-based distributed virtual laboratory. In Proceedings - Frontiers in Education Conference, 3.
Rafe, G.E., Needy, K.L.S., Bidanda, B., Ghai, R.K., & Mylan, T.A. (2000). Development and implementation of a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 1959-1969).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3639-3648).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3599-3608).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3629-3638).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3609-3618).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3589-3598).
Rafe, G., Needy, K.L.S., & Bidanda, B. (1999). Motivations for a distributed virtual laboratory for continuous manufacturing education and training. In ASEE Annual Conference Proceedings, (pp. 3619-3628).
Cohen, Y., & Bidanda, B. (1997). Y net: A new technique for modeling discrete control in industrial systems. In Industrial Engineering Research - Conference Proceedings, (pp. 586-591).
Warner, R.C., Needy, K.L.S., & Bidanda, B. (1997). Worker assignment in implementing manufacturing cells. In Industrial Engineering Research - Conference Proceedings, (pp. 240-245).
Berardi, M., & Bidanda, B. (1996). Non-traditional economic justification model for advanced technologies. In Industrial Engineering Research - Conference Proceedings, (pp. 793-798).
Cohen, Y., Bidanda, B., Billo, R.E., & Zandin, K.B. (1996). On integrating work measurement systems with voice recognition technologies. In Industrial Engineering Research - Conference Proceedings, (pp. 551-556).
Maitra, A., Bidanda, B., & Rubinovitz, J. (1996). Need for and the development of a generic programming interface for industrial robots. In Nnaji, B.O. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 2911, (pp. 89-95).SPIE, the international society for optics and photonics. doi: 10.1117/12.262502.
Bidanda, B., Egbelu, P.J., Nnaji, B.O., Sadowski, R., Wysk, R.A., & Zandin, K.B. (1995). Future directions in manufacturing research: Opportunities for IE researchers. In Industrial Engineering Research - Conference Proceedings, (pp. 10-18).
Billo, R.E., Bidanda, B., Cohen, Y., Fei, C.Y., & Petri, K.L. (1995). Testing of two-dimensional bar code systems for overhead sortation and tracking. In Industrial Engineering Research - Conference Proceedings, (pp. 1018-1024).
Burns, G.L., & Bidanda, B. (1995). Modular hierarchical control networks for the specification and implementation of automated manufacturing control systems. In Industrial Engineering Research - Conference Proceedings, (pp. 817-826).
Narayanan, V., & Bidanda, B. (1995). Analysis of process parameters for robotic spray glazing. In Industrial Engineering Research - Conference Proceedings, (pp. 1010-1017).
Needy, K.L.S., & Bidanda, B. (1995). Activity based costing for small manufacturers - a field study. In Industrial Engineering Research - Conference Proceedings, (pp. 628-634).
Petri, K.L., Billo, R., & Bidanda, B. (1995). Modeling the abrasive flow machining process: A neural network approach. In Industrial Engineering Research - Conference Proceedings, (pp. 239-244).
Billo, R.E., Bidanda, B., & Peternel, J. (1993). Parametric design of countersink cutting tools. In Proceedings of the Industrial Engineering Research Conference, (pp. 370-374).
Burns, G., Rajgopal, J., & Bidanda, B. (1993). Integrating group technology and TSP for scheduling operations with sequence dependent setup times. In Proceedings of the Industrial Engineering Research Conference, (pp. 837-841).
KADIDAL, M., & BIDANDA, B. (1993). A CASTABILITY EXPERT-SYSTEM. In COMPUTERS & INDUSTRIAL ENGINEERING, 25(1-4), (pp. 99-102).Elsevier. doi: 10.1016/0360-8352(93)90230-U.
Martinez, S., Smith, A.E., & Bidanda, B. (1993). Neural predictive quality model for slip casting using categorical metrics. In Proceedings of the Industrial Engineering Research Conference, (pp. 265-269).
BIDANDA, B., BENBRAHIM, S., NARAYANAN, V., & THORNE, J. (1991). ON THE DEVELOPMENT OF A ROBOTIC WORKCELL FOR SANITARY WARE SPRAY GLAZING. In COMPUTERS & INDUSTRIAL ENGINEERING, 21(1-4), (pp. 541-545).Elsevier. doi: 10.1016/0360-8352(91)90149-Z.
Bidanda, B. (1990). Development of a computer aided fixture selection system for concentric, rotational parts. In American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, 47, (pp. 219-226).