headshot

Prashant Kumta

Professor
Edward R. Weidlein Chair Professor with Tenure
Visit Dr. Kumta's Lab Site Bioengineering Department

about

(2012) Listed in Forbes India, top 18 Indian Scientists who are changing the world; http://forbesindia.com/article/innovation-special/18-indian-minds-who-are-doing-cutting-edge-work/32312/0.

(2011) Radio interview by The American Entrepreneur (TAE radio.com), Pittsburgh.

(2010) Board of Visitors' Faculty Award (2010) for the most accomplished faculty in the Swanson School of Engineering.

(2010) Fellow of the American Institute of Medical and Biological Engineers (AIMBE).

(2009) Fellow of the American Ceramic Society (ACerS).

(2009) Interviewed by the American Ceramic Society.

(2007) Edward R. Weidlein Chair Professor, University of Pittsburgh.

(2004) Interviewed by Anne Devlin on the Pittsburgh Community News Channel (PCNC) Anne Devlin TV show, related to Fuel Cell research.

(2003) Featured in the Science and Technology Edition of Pittsburgh Post-Gazette.

(2003) Listed in Marquis's WHOS's WHO in American Education.

(2001 - 2005) Listed in Marquis's WHO's WHO in World.

(2000 - 2005) Listed in Marquis's WHO's WHO in America.

(2000 - 2005) Listed in Marquis's WHO's WHO in World, Millennium edition.

(1999 - 2005) Listed in Marquis's WHO's WHO in America.

(1999 - 2005) Listed in Marquis's WHO's WHO in Science and Engineering.

(1998 - 2005) Listed in Marquis's WHO's WHO in Science and Engineering.

Research Initiation Award from NSF, Grant for $ 90,000. Duration 3 years..

As the main principal PI of the NSF-NIRT award on Ink Jet Printing of Nanostructured Matrices for Non-Viral Gene Delivery, I was involved in coordinating the activities of four co-principal investigators, and more than a dozen graduate students as well as half a dozen post doctoral fellows..

Interviewed by Tanya Caruso for Fuel Cells related research in the "On Q" program on the Pittsburgh WQED TV channel related to Fuel Cells research.

Served on several review panels for the National Science Foundation.

Served on the Biomaterials and Bio-interfaces Study Section for the NIH-NIBIB.

Interviewed by New York Times, June 11th regarding expert opinion on A123 Company investments in batteries and federal government strategies on energy storage.

Summer Faculty Fellow, Award from AFOSR, to spend the summer of 1993 at Wright Patterson Air Force Base..

Postdoctoral Training in Materials Science and Engineering, University of Arizona, 1990 - present

M.S., Materials Science and Engineering, University of Arizona, 1987

B.Tech., Metallurgical Engineering, Indian Institute of Technology (IIT), 1984

Acheson, J.G., McKillop, S., Ward, J., Roy, A., Xu, Z., Boyd, A.R., Lemoine, P., Kumta, P.N., Sankar, J., & Meenan, B.J. (2021). Effects of strontium-substitution in sputter deposited calcium phosphate coatings on the rate of corrosion of magnesium alloys. SURFACE & COATINGS TECHNOLOGY, 421, 127446.Elsevier BV. doi: 10.1016/j.surfcoat.2021.127446.

Ghadge, S.D., Velikokhatnyi, O.I., Datta, M.K., Damodaran, K., Shanthi, P.M., & Kumta, P.N. (2021). Highly Efficient Fluorine Doped Ni2P Electrocatalysts for Alkaline Mediated Oxygen Evolution Reaction. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 168(6), 064512.The Electrochemical Society. doi: 10.1149/1945-7111/ac094a.

Ghadge, S.D., Velikokhatnyi, O.I., Datta, M.K., Shanthi, P.M., & Kumta, P.N. (2021). Computational and experimental investigation of Co and S-doped Ni2P as an efficient electrocatalyst for acid mediated proton exchange membrane hydrogen evolution reaction. CATALYSIS SCIENCE & TECHNOLOGY, 11(3), 861-873.Royal Society of Chemistry (RSC). doi: 10.1039/d0cy01862g.

Datta, M.K., Gattu, B., Kuruba, R., Shanthi, P.M., & Kumta, P.N. (2020). Constitutional under-potential plating (CUP) - New insights for predicting the morphological stability of deposited lithium anodes in lithium metal batteries. JOURNAL OF POWER SOURCES, 467, 228243.Elsevier BV. doi: 10.1016/j.jpowsour.2020.228243.

Ghadge, S.D., Datta, M.K., Velikokhatnyi, O.I., Kuruba, R., Shanthi, P.M., & Kumta, P.N. (2020). Influence of Defects on Activity-Stability of Cu1.5Mn1.5O4 for Acid-Mediated Oxygen Evolution Reaction. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 167(14), 144511.The Electrochemical Society. doi: 10.1149/1945-7111/abc4f5.

Ghadge, S.D., Velikokhatnyi, O.I., Datta, M.K., Shanthi, P.M., Tan, S., & Kumta, P.N. (2020). Computational and Experimental Study of Fluorine Doped (Mn1-xNbx)O-2 Nanorod Electrocatalysts for Acid-Mediated Oxygen Evolution Reaction. ACS APPLIED ENERGY MATERIALS, 3(1), 541-557.American Chemical Society (ACS). doi: 10.1021/acsaem.9b01796.

Mady, L.J., Criado, M., Park, J., Baddour, K., Aral, A.M., Roy, A., Rigatti, L.H., Kumta, P.N., & Chi, D.H. (2020). Subglottic Stenosis: Development of a Clinically Relevant Endoscopic Animal Model. OTOLARYNGOLOGY-HEAD AND NECK SURGERY, 162(6), 905-913.SAGE Publications. doi: 10.1177/0194599820921404.

Richardson, T., Wiegand, C., Adisa, F., Ravikumar, K., Candiello, J., Kumta, P., & Banerjee, I. (2020). Engineered peptide modified hydrogel platform for propagation of human pluripotent stem cells. ACTA BIOMATERIALIA, 113, 228-239.Elsevier BV. doi: 10.1016/j.actbio.2020.06.034.

Shanthi, P.M., Kuruba, R., Velikokhatnyi, O.I., Hanumantha, P.J., Gattu, B., Datta, M.K., Ghadge, S.D., & Kumta, P.N. (2020). Theoretical and Experimental Strategies for New Heterostructures with Improved Stability for Rechargeable Lithium Sulfur Batteries. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 167(4), 040513.The Electrochemical Society. doi: 10.1149/1945-7111/ab7220.

Wu, J., Mady, L.J., Roy, A., Aral, A.M., Lee, B., Zheng, F., Catalin, T., Chun, Y., Wagner, W.R., Yang, K., Trejo Bittar, H.E., Chi, D., & Kumta, P.N. (2020). In-vivo efficacy of biodegradable ultrahigh ductility Mg-Li-Zn alloy tracheal stents for pediatric airway obstruction. COMMUNICATIONS BIOLOGY, 3(1), 787.Springer Science and Business Media LLC. doi: 10.1038/s42003-020-01400-7.

Wu, J., Zhao, D., Lee, B., Roy, A., Yao, R., Chen, S., Dong, Z., Heineman, W.R., & Kumta, P.N. (2020). Effect of Lithium and Aluminum on the Mechanical Properties, In Vivo and In Vitro Degradation, and Toxicity of Multiphase Ultrahigh Ductility Mg-Li-Al-Zn Quaternary Alloys for Vascular Stent Application. ACS BIOMATERIALS SCIENCE & ENGINEERING, 6(4), 1950-1964.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.9b01591.

Zhao, D., Wu, J., Chou, D.T., Hoagland, W., Benson, D., Dong, Z., Kumta, P.N., & Heineman, W.R. (2020). Visual Hydrogen Mapping Sensor for Noninvasive Monitoring of Bioresorbable Magnesium Implants In Vivo. JOM, 72(5), 1851-1858.Springer Science and Business Media LLC. doi: 10.1007/s11837-020-04052-4.

Chou, D.T., Hong, D., Oksuz, S., Schweizer, R., Roy, A., Lee, B., Shridhar, P., Gorantla, V., & Kumta, P.N. (2019). Corrosion and bone healing of Mg-Y-Zn-Zr-Ca alloy implants: Comparative in vivo study in a non-immobilized rat femoral fracture model. JOURNAL OF BIOMATERIALS APPLICATIONS, 33(9), 1178-1194.SAGE Publications. doi: 10.1177/0885328219825568.

Devi, K.B., Tripathy, B., Roy, A., Lee, B., Kumta, P.N., Nandi, S.K., & Roy, M. (2019). In Vitro Biodegradation and In Vivo Biocompatibility of Forsterite Bio-Ceramics: Effects of Strontium Substitution. ACS BIOMATERIALS SCIENCE & ENGINEERING, 5(2), 530-543.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.8b00788.

Ghadge, S.D., Velikokhatnyi, O.I., Datta, M.K., Shanthi, P.M., Tan, S., Damodaran, K., & Kumta, P.N. (2019). Experimental and Theoretical Validation of High Efficiency and Robust Electrocatalytic Response of One-Dimensional (1D) (Mn,Ir)O-2:10F Nanorods for the Oxygen Evolution Reaction in PEM-Based Water Electrolysis. ACS CATALYSIS, 9(3), 2134-2157.American Chemical Society (ACS). doi: 10.1021/acscatal.8b02901.

Luffy, S.A., Wu, J., Kumta, P.N., & Gilbert, T.W. (2019). Evaluation of magnesium alloys for use as an intraluminal tracheal for pediatric applications in a rat tracheal bypass model. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 107(6), 1844-1853.Wiley. doi: 10.1002/jbm.b.34277.

Shanthi, P.M., Hanumantha, P.J., Kuruba, R., Gattu, B., Datta, M.K., & Kumta, P.N. (2019). Effective Bipyridine and Pyrazine-Based Polysulfide Dissolution Resistant Complex Framework Material Systems for High Capacity Rechargeable Lithium-Sulfur Batteries. ENERGY TECHNOLOGY, 7(12), 1900141.Wiley. doi: 10.1002/ente.201900141.

Shanthi, P.M., Hanumantha, P.J., Ramalinga, K., Gattu, B., Datta, M.K., & Kumta, P.N. (2019). Sulfonic Acid Based Complex Framework Materials (CFM): Nanostructured Polysulfide Immobilization Systems for Rechargeable Lithium-Sulfur Battery. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 166(10), A1827-A1835.The Electrochemical Society. doi: 10.1149/2.0251910jes.

Wu, J., Lee, B., Saha, P., & N Kumta, P. (2019). A feasibility study of biodegradable magnesium-aluminum-zinc-calcium-manganese (AZXM) alloys for tracheal stent application. JOURNAL OF BIOMATERIALS APPLICATIONS, 33(8), 1080-1093.SAGE Publications. doi: 10.1177/0885328218824775.

Candiello, J., Grandhi, T.S.P., Goh, S.K., Vaidya, V., Lemmon-Kishi, M., Eliato, K.R., Ros, R., Kumta, P.N., Rege, K., & Banerjee, I. (2018). 3D heterogeneous islet organoid generation from human embryonic stem cells using a novel engineered hydrogel platform. BIOMATERIALS, 177, 27-39.Elsevier BV. doi: 10.1016/j.biomaterials.2018.05.031.

Choi, D., Jampani, P.H., Jayakody, J.R.P., Greenbaum, S.G., & Kumta, P.N. (2018). Synthesis, surface chemistry and pseudocapacitance mechanisms of VN nanocrystals derived by a simple two-step halide approach. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 230, 8-19.Elsevier BV. doi: 10.1016/j.mseb.2017.12.017.

Devi, K.B., Tripathy, B., Kumta, P.N., Nandi, S.K., & Roy, M. (2018). In Vivo Biocompatibility of Zinc-Doped Magnesium Silicate Bio-Ceramics. ACS BIOMATERIALS SCIENCE & ENGINEERING, 4(6), 2126-2133.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.8b00297.

Ghadge, S.D., Patel, P.P., Datta, M.K., Velikokhatnyi, O.I., Shanthi, P.M., & Kumta, P.N. (2018). First report of vertically aligned (Sn,Ir)O-2:F solid solution nanotubes: Highly efficient and robust oxygen evolution electrocatalysts for proton exchange membrane based water electrolysis. JOURNAL OF POWER SOURCES, 392, 139-149.Elsevier BV. doi: 10.1016/j.jpowsour.2018.04.065.

Ivanina, A.V., Borah, B.M., Vogts, A., Malik, I., Wu, J., Chin, A.R., Almarza, A.J., Kumta, P., Piontkivska, H., Beniash, E., & Sokolova, I.M. (2018). Potential trade-offs between biomineralization and immunity revealed by shell properties and gene expression profiles of two closely related Crassostrea species. JOURNAL OF EXPERIMENTAL BIOLOGY, 221(18).The Company of Biologists. doi: 10.1242/jeb.183236.

Jeong, G.H., Lee, I., Lee, D., Lee, H.M., Baek, S., Kwon, O.P., Kumta, P.N., Yoon, S., & Kim, S.W. (2018). Fabrication of beta-CoV3O8 nanorods embedded in graphene sheets and their application for electrochemical charge storage electrode. NANOTECHNOLOGY, 29(19), 195403.IOP Publishing. doi: 10.1088/1361-6528/aaae3e.

Kunjukunju, S., Roy, A., Shekhar, S., & Kumta, P.N. (2018). Cross-linked enzyme aggregates of alginate lyase: A systematic engineered approach to controlled degradation of alginate hydrogel. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 115, 176-184.Elsevier BV. doi: 10.1016/j.ijbiomac.2018.03.110.

Patel, P.P., Ghadge, S.D., Hanumantha, P.J., Datta, M.K., Gattu, B., Shanthi, P.M., & Kumta, P.N. (2018). Active and robust novel bilayer photoanode architectures for hydrogen generation via direct non-electric bias induced photo-electrochemical water splitting. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 43(29), 13158-13176.Elsevier BV. doi: 10.1016/j.ijhydene.2018.05.063.

Patel, P.P., Velikokhatnyi, O.I., Ghadge, S.D., Hanumantha, P.J., Datta, M.K., Kuruba, R., Gattu, B., Shanthi, P.M., & Kumta, P.N. (2018). Electrochemically active and robust cobalt doped copper phosphosulfide electro-catalysts for hydrogen evolution reaction in electrolytic and photoelectrochemical water splitting. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 43(16), 7855-7871.Elsevier BV. doi: 10.1016/j.ijhydene.2018.02.147.

Patil, M., Umanzor, F., Kormos, R., & Kumta, P.N. (2018). Platinum aptasensor wire arrays for cardiac biomarker detection. MATERIALS TODAY COMMUNICATIONS, 15, 55-60.Elsevier BV. doi: 10.1016/j.mtcomm.2018.02.018.

Richardson, T.C., Mathew, S., Candiello, J.E., Goh, S.K., Kumta, P.N., & Banerjee, I. (2018). Development of an Alginate Array Platform to Decouple the Effect of Multiparametric Perturbations on Human Pluripotent Stem Cells During Pancreatic Differentiation. BIOTECHNOLOGY JOURNAL, 13(2), 1700099.Wiley. doi: 10.1002/biot.201700099.

Shanthi, P.M., Hanumantha, P.J., Albuquerque, T., Gattu, B., & Kumta, P.N. (2018). Novel Composite Polymer Electrolytes of PVdF-HFP Derived by Electrospinning with Enhanced Li-Ion Conductivities for Rechargeable Lithium-Sulfur Batteries. ACS APPLIED ENERGY MATERIALS, 1(2), 483-494.American Chemical Society (ACS). doi: 10.1021/acsaem.7b00094.

Shekhar, S., Lee, B., Roy, A., Candiello, J., & Kumta, P.N. (2018). Surface mediated non-viral gene transfection on titanium substrates using polymer electrolyte and nanostructured silicate substituted calcium phosphate pDNA (NanoSiCaPs) composites. MATERIALS TODAY COMMUNICATIONS, 16, 169-173.Elsevier BV. doi: 10.1016/j.mtcomm.2018.05.008.

Velikokhatnyi, O.I., & Kumta, P.N. (2018). First principles study of the elastic properties of magnesium and iron based bio-resorbable alloys. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 230, 20-23.Elsevier BV. doi: 10.1016/j.mseb.2017.12.024.

Wu, J., Zhao, D., Ohodnicki, J.M., Lee, B., Roy, A., Yao, R., Chen, S., Dong, Z., Heineman, W.R., & Kumta, P.N. (2018). In Vitro and in Vivo Evaluation of Multiphase Ultrahigh Ductility Mg-Li-Zn Alloys for Cardiovascular Stent Application. ACS BIOMATERIALS SCIENCE & ENGINEERING, 4(3), 919-932.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.7b00854.

Bayer, E.A., Jordan, J., Roy, A., Gottardi, R., Fedorchak, M.V., Kumta, P.N., & Little, S.R. (2017). Programmed Platelet-Derived Growth Factor-BB and Bone Morphogenetic Protein-2 Delivery from a Hybrid Calcium Phosphate/Alginate Scaffold. TISSUE ENGINEERING PART A, 23(23-24), 1382-1393.Mary Ann Liebert Inc. doi: 10.1089/ten.tea.2017.0027.

Devi, K.B., Lee, B., Roy, A., Kumta, P.N., & Roy, M. (2017). Effect of zinc oxide doping on in vitro degradation of magnesium silicate bioceramics. MATERIALS LETTERS, 207, 100-103.Elsevier BV. doi: 10.1016/j.matlet.2017.07.052.

Gattu, B., Epur, R., Jampani, P.H., Kuruba, R., Datta, M.K., & Kumta, P.N. (2017). Silicon-Carbon Core-Shell Hollow Nanotubular Configuration High-Performance Lithium-Ion Anodes. JOURNAL OF PHYSICAL CHEMISTRY C, 121(18), 9662-9671.American Chemical Society (ACS). doi: 10.1021/acs.jpcc.7b00057.

Gattu, B., Epur, R., Shanti, P., Jampani, P., Kuruba, R., Datta, M., Manivannan, A., & Kumta, P. (2017). Pulsed Current Electrodeposition of Silicon Thin Films Anodes for Lithium Ion Battery Applications. Inorganics, 5(2), 27.MDPI AG. doi: 10.3390/inorganics5020027.

Gattu, B., Jampani, P.H., Datta, M.K., Kuruba, R., & Kumta, P.N. (2017). Water-soluble-template-derived nanoscale silicon nanoflake and nano-rod morphologies: Stable architectures for lithium-ion battery anodes. NANO RESEARCH, 10(12), 4284-4297.Springer Science and Business Media LLC. doi: 10.1007/s12274-017-1707-z.

Ghadge, S.D., Patel, P.P., Datta, M.K., Velikokhatnyi, O.I., Kuruba, R., Shanthi, P.M., & Kumta, P.N. (2017). Fluorine substituted (Mn,Ir)O-2:F high performance solid solution oxygen evolution reaction electro-catalysts for PEM water electrolysis. RSC ADVANCES, 7(28), 17311-17324.Royal Society of Chemistry (RSC). doi: 10.1039/c6ra27354h.

Patel, P.P., Hanumantha, P.J., Datta, M.K., Velikokhatnyi, O.I., Hong, D., Poston, J.A., Manivannan, A., & Kumta, P.N. (2017). Cobalt based nanostructured alloys: Versatile high performance robust hydrogen evolution reaction electro-catalysts for electrolytic and photo-electrochemical water splitting. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 42(27), 17049-17062.Elsevier BV. doi: 10.1016/j.ijhydene.2017.05.175.

Patel, P.P., Velikokhatnyi, O.I., Ghadge, S.D., Jampani, P.H., Datta, M.K., Hong, D., Poston, J.A., Manivannan, A., & Kumta, P.N. (2017). Highly active robust oxide solid solution electro-catalysts for oxygen reduction reaction for proton exchange membrane fuel cell and direct methanol fuel cell cathodes. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 42(38), 24079-24089.Elsevier BV. doi: 10.1016/j.ijhydene.2017.07.139.

Patil, A.J., Jackson, O., Fulton, L.B., Hong, D., Desai, P.A., Kelleher, S.A., Chou, D.T., Tan, S., Kumta, P.N., & Beniash, E. (2017). Anticorrosive Self-Assembled Hybrid Alkylsilane Coatings for Resorbable Magnesium Metal Devices. ACS BIOMATERIALS SCIENCE & ENGINEERING, 3(4), 518-529.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.6b00585.

Saha, P., Jampani, P.H., Datta, M.K., Hong, D., Gattu, B., Patel, P., Kadakia, K.S., Manivannan, A., & Kumta, P.N. (2017). A rapid solid-state synthesis of electrochemically active Chevrel phases (Mo6T8; T = S, Se) for rechargeable magnesium batteries. NANO RESEARCH, 10(12), 4415-4435.Springer Science and Business Media LLC. doi: 10.1007/s12274-017-1695-z.

Shanthi, P.M., Hanumantha, P.J., Gattu, B., Sweeney, M., Datta, M.K., & Kumta, P.N. (2017). Understanding the Origin of Irreversible Capacity loss in Non-Carbonized Carbonate - based Metal Organic Framework (MOF) Sulfur hosts for Lithium - Sulfur battery. ELECTROCHIMICA ACTA, 229, 208-218.Elsevier BV. doi: 10.1016/j.electacta.2017.01.115.

Yu, G.Z., Chou, D.T., Hong, D., Roy, A., & Kumta, P.N. (2017). Biomimetic Rotated Lamellar Plywood Motifs by Additive Manufacturing of Metal Alloy Scaffolds for Bone Tissue Engineering. ACS BIOMATERIALS SCIENCE & ENGINEERING, 3(4), 648-657.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.7b00043.

Zhao, D., Wang, T., Nahan, K., Guo, X., Zhang, Z., Dong, Z., Chen, S., Chou, D.T., Hong, D., Kumta, P.N., & Heineman, W.R. (2017). In vivo characterization of magnesium alloy biodegradation using electrochemical H-2 monitoring, ICP-MS, and XPS. ACTA BIOMATERIALIA, 50, 556-565.Elsevier BV. doi: 10.1016/j.actbio.2017.01.024.

Candiello, J., Richardson, T., Padgaonkar, K., Task, K., Kumta, P.N., & Banerjee, I. (2016). Alginate encapsulation of chitosan nanoparticles: a viable alternative to soluble chemical signaling in definitive endoderm induction of human embryonic stem cells. JOURNAL OF MATERIALS CHEMISTRY B, 4(20), 3575-3583.Royal Society of Chemistry (RSC). doi: 10.1039/c5tb02428e.

Damle, S.S., Pal, S., Kumta, P.N., & Maiti, S. (2016). Effect of silicon configurations on the mechanical integrity of silicon-carbon nanotube heterostructured anode for lithium ion battery: A computational study. JOURNAL OF POWER SOURCES, 304, 373-383.Elsevier BV. doi: 10.1016/j.jpowsour.2015.11.027.

Hanumantha, P.J., Datta, M.K., Kadakia, K., Okoli, C., Patel, P., & Kumta, P.N. (2016). Vanadium nitride supercapacitors: Effect of Processing Parameters on electrochemical charge storage behavior. ELECTROCHIMICA ACTA, 207, 37-47.Elsevier BV. doi: 10.1016/j.electacta.2016.04.058.

Hanumantha, P.J., Gattu, B., Shanthi, P.M., Damle, S.S., Basson, Z., Bandi, R., Datta, M.K., Park, S., & Kumta, P.N. (2016). Flexible sulfur wires (Flex-SWs)-A new versatile platform for lithium-sulfur batteries. ELECTROCHIMICA ACTA, 212, 286-293.Elsevier BV. doi: 10.1016/j.electacta.2016.06.130.

Hong, D., Chou, D.T., Velikokhatnyi, O.I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H.A., & Kumta, P.N. (2016). Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys. ACTA BIOMATERIALIA, 45, 375-386.Elsevier BV. doi: 10.1016/j.actbio.2016.08.032.

Kadakia, K.S., Jampani, P.H., Velikokhatnyi, O.I., Datta, M.K., Patel, P., Chung, S.J., Park, S.K., Poston, J.A., Manivannan, A., & Kumta, P.N. (2016). Study of fluorine doped (Nb,Ir)O-2 solid solution electro-catalyst powders for proton exchange membrane based oxygen evolution reaction. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 212, 101-108.Elsevier BV. doi: 10.1016/j.mseb.2016.06.015.

Ostrowski, N., Roy, A., & Kumta, P.N. (2016). Magnesium Phosphate Cement Systems for Hard Tissue Applications: A Review. ACS BIOMATERIALS SCIENCE & ENGINEERING, 2(7), 1067-1083.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.6b00056.

Patel, P.P., Datta, M.K., Velikokhatnyi, O.I., Kuruba, R., Damodaran, K., Jampani, P., Gattu, B., Shanthi, P.M., Damle, S.S., & Kumta, P.N. (2016). Noble metal-free bifunctional oxygen evolution and oxygen reduction acidic media electrocatalysts. SCIENTIFIC REPORTS, 6(1), 28367.Springer Science and Business Media LLC. doi: 10.1038/srep28367.

Patel, P.P., Hanumantha, P.J., Velikokhatnyi, O.I., Datta, M.K., Gattu, B., Poston, J.A., Manivannan, A., & Kumta, P.N. (2016). Vertically aligned nitrogen doped (Sn,Nb)O-2 nanotubes - Robust photoanodes for hydrogen generation by photoelectrochemical water splitting. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 208, 1-14.Elsevier BV. doi: 10.1016/j.mseb.2016.02.001.

Ramanathan, M., Patil, M., Epur, R., Yun, Y., Shanov, V., Schulz, M., Heineman, W.R., Datta, M.K., & Kumta, P.N. (2016). Gold-coated carbon nanotube electrode arrays: Immunosensors for impedimetric detection of bone biomarkers. BIOSENSORS & BIOELECTRONICS, 77, 580-588.Elsevier BV. doi: 10.1016/j.bios.2015.10.014.

Ramanathan, M., Patil, M.S., Epur, R., & Kumta, P.N. (2016). Tartrate Resistant Acid Phosphatase Assisted Degradation of Single-Wall Carbon Nanotubes (SWCNTs). ACS BIOMATERIALS SCIENCE & ENGINEERING, 2(5), 712-721.American Chemical Society (ACS). doi: 10.1021/acsbiomaterials.5b00462.

Richardson, T., Barner, S., Candiello, J., Kumta, P.N., & Banerjee, I. (2016). Capsule stiffness regulates the efficiency of pancreatic differentiation of human embryonic stem cells. ACTA BIOMATERIALIA, 35, 153-165.Elsevier BV. doi: 10.1016/j.actbio.2016.02.025.

Roy, A., Jhunjhunwala, S., Bayer, E., Fedorchak, M., Little, S.R., & Kumta, P.N. (2016). Porous calcium phosphate-poly (lactic-co-glycolic) acid composite bone cement: A viable tunable drug delivery system. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 59, 92-101.Elsevier BV. doi: 10.1016/j.msec.2015.09.081.

Shekhar, S., Roy, A., Hong, D., & Kumta, P.N. (2016). Nanostructured silicate substituted calcium phosphate (NanoSiCaPs) nanoparticles - Efficient calcium phosphate based non-viral gene delivery systems. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 69, 486-495.Elsevier BV. doi: 10.1016/j.msec.2016.06.076.

Shridhar, P., Chen, Y., Khalil, R., Plakseychuk, A., Cho, S.K., Tillman, B., Kumta, P.N., & Chun, Y. (2016). A Review of PMMA Bone Cement and Intra-Cardiac Embolism. MATERIALS, 9(10), 821.MDPI AG. doi: 10.3390/ma9100821.

Singh, S.S., Roy, A., Lee, B., & Kumta, P.N. (2016). Study of hMSC proliferation and differentiation on Mg and Mg-Sr containing biphasic beta-tricalcium phosphate and amorphous calcium phosphate ceramics. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 64, 219-228.Elsevier BV. doi: 10.1016/j.msec.2016.03.020.

Singh, S.S., Roy, A., Lee, B., Banerjee, I., & Kumta, P.N. (2016). Synthesis, characterization, and in-vitro cytocompatibility of amorphous beta-tri-calcium magnesium phosphate ceramics. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 67, 636-645.Elsevier BV. doi: 10.1016/j.msec.2016.04.076.

Singh, S.S., Roy, A., Lee, B., Parekh, S., & Kumta, P.N. (2016). Murine osteoblastic and osteoclastic differentiation on strontium releasing hydroxyapatite forming cements. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 63, 429-438.Elsevier BV. doi: 10.1016/j.msec.2016.02.059.

Zhao, D., Wang, T., Hoagland, W., Benson, D., Dong, Z., Chen, S., Chou, D.T., Hong, D., Wu, J., Kumta, P.N., & Heineman, W.R. (2016). Visual H-2 sensor for monitoring biodegradation of magnesium implants in vivo. ACTA BIOMATERIALIA, 45, 399-409.Elsevier BV. doi: 10.1016/j.actbio.2016.08.049.

Zhao, D., Wang, T., Kuhlmann, J., Dong, Z., Chen, S., Joshi, M., Salunke, P., Shanov, V.N., Hong, D., Kumta, P.N., & Heineman, W.R. (2016). In vivo monitoring the biodegradation of magnesium alloys with an electrochemical H-2 sensor. ACTA BIOMATERIALIA, 36, 361-368.Elsevier BV. doi: 10.1016/j.actbio.2016.03.039.

Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B.J., Chou, D.T., Pal, S., Maiti, S., Kumta, P.N., & Sfeir, C. (2015). In vivo study of magnesium plate and screw degradation and bone fracture healing. ACTA BIOMATERIALIA, 18, 262-269.Elsevier BV. doi: 10.1016/j.actbio.2015.02.010.

Costello, B.J., Kumta, P., & Sfeir, C.S. (2015). Regenerative Technologies for Craniomaxillofacial Surgery. JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY, 73(12), S116-S125.Elsevier BV. doi: 10.1016/j.joms.2015.04.036.

Epur, R., Hanumantha, P.J., Datta, M.K., Hong, D., Gattu, B., & Kumta, P.N. (2015). A simple and scalable approach to hollow silicon nanotube (h-SiNT) anode architectures of superior electrochemical stability and reversible capacity. JOURNAL OF MATERIALS CHEMISTRY A, 3(20), 11117-11129.Royal Society of Chemistry (RSC). doi: 10.1039/c5ta00961h.

Epur, R., Ramanathan, M., Datta, M.K., Hong, D.H., Jampani, P.H., Gattu, B., & Kumta, P.N. (2015). Scribable multi-walled carbon nanotube-silicon nanocomposites: a viable lithium-ion battery system. NANOSCALE, 7(8), 3504-3510.Royal Society of Chemistry (RSC). doi: 10.1039/c4nr04288c.

Guaragno, M.L., Gottardi, R., Fedorchak, M.V., Roy, A., Kumta, P.N., & Little, S.R. (2015). One-step synthesis of fluorescentty labelled, single-walled carbon nanotubes. CHEMICAL COMMUNICATIONS, 51(97), 17233-17236.Royal Society of Chemistry (RSC). doi: 10.1039/c5cc05573c.

Jampani, P.H., Velikokhatnyi, O., Kadakia, K., Hong, D.H., Damle, S.S., Poston, J.A., Manivannan, A., & Kumta, P.N. (2015). High energy density titanium doped-vanadium oxide-vertically aligned CNT composite electrodes for supercapacitor applications. JOURNAL OF MATERIALS CHEMISTRY A, 3(16), 8413-8432.Royal Society of Chemistry (RSC). doi: 10.1039/c4ta06777k.

Jaramillo, M., Singh, S.S., Velankar, S., Kumta, P.N., & Banerjee, I. (2015). Inducing endoderm differentiation by modulating mechanical properties of soft substrates. JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 9(1), 1-12.Wiley. doi: 10.1002/term.1602.

Kumta, P.N. (2015). Special Issue: Electrical Fatigue Preface. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 192(C), 1.Elsevier BV. doi: 10.1016/j.mseb.2014.12.019.

Kuruba, R., Datta, M.K., Damodaran, K., Jampani, P.H., Gattu, B., Patel, P.P., Shanthi, P.M., Damle, S., & Kumta, P.N. (2015). Guar gum: Structural and electrochemical characterization of natural polymer based binder for silicon-carbon composite rechargeable Li-ion battery anodes. JOURNAL OF POWER SOURCES, 298, 331-340.Elsevier BV. doi: 10.1016/j.jpowsour.2015.07.102.

Ostrowski, N., Lee, B., Hong, D., Enick, P.N., Roy, A., & Kumta, P.N. (2015). Synthesis, Osteoblast, and Osteoclast Viability of Amorphous and Crystalline Tri-Magnesium Phosphate. ACS BIOMATERIALS SCIENCE & ENGINEERING, 1(1), 52-63.American Chemical Society (ACS). doi: 10.1021/ab500073c.

Ostrowski, N., Sharma, V., Roy, A., & Kumta, P.N. (2015). Exploration of Amorphous and Crystalline Tri-Magnesium Phosphates for Bone Cements. In Ceramic Transactions Series. (pp. 33-46).John Wiley & Sons, Inc. doi: 10.1002/9781119190134.ch4.

Ostrowski, N., Sharma, V., Roy, A., & Kumta, P.N. (2015). Systematic Assessment of Synthesized Tri-magnesium Phosphate Powders (Amorphous, Semi-crystalline and Crystalline) and Cements for Ceramic Bone Cement Applications. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 31(5), 437-444.Elsevier BV. doi: 10.1016/j.jmst.2014.12.002.

Patel, P.P., Datta, M.K., Jampani, P.H., Hong, D., Poston, J.A., Manivannan, A., & Kumta, P.N. (2015). High performance and durable nanostructured TiN supported Pt-50-Ru-50 anode catalyst for direct methanol fuel cell (DMFC). JOURNAL OF POWER SOURCES, 293, 437-446.Elsevier BV. doi: 10.1016/j.jpowsour.2015.05.051.

Patel, P.P., Datta, M.K., Velikokhatnyi, O.I., Jampani, P., Hong, D., Poston, J.A., Manivannand, A., & Kumta, P.N. (2015). Nanostructured robust cobalt metal alloy based anode electro-catalysts exhibiting remarkably high performance and durability for proton exchange membrane fuel cells. JOURNAL OF MATERIALS CHEMISTRY A, 3(26), 14015-14032.Royal Society of Chemistry (RSC). doi: 10.1039/c5ta01362c.

Patel, P.P., Hanumantha, P.J., Velikokhatnyi, O.I., Datta, M.K., Hong, D., Gattu, B., Poston, J.A., Manivannan, A., & Kumta, P.N. (2015). Nitrogen and cobalt co-doped zinc oxide nanowires - Viable photoanodes for hydrogen generation via photoelectrochemical water splitting. JOURNAL OF POWER SOURCES, 299, 11-24.Elsevier BV. doi: 10.1016/j.jpowsour.2015.08.027.

Patel, P.P., Jampani, P.H., Datta, M.K., Velikokhatnyi, O.I., Hong, D., Poston, J.A., Manivannan, A., & Kumta, P.N. (2015). WO3 based solid solution oxide - promising proton exchange membrane fuel cell anode electro-catalyst. JOURNAL OF MATERIALS CHEMISTRY A, 3(35), 18296-18309.Royal Society of Chemistry (RSC). doi: 10.1039/c5ta03792a.

Perkins, J., Xu, Z., Smith, C., Roy, A., Kumta, P.N., Waterman, J., Conklin, D., & Desai, S. (2015). Direct Writing of Polymeric Coatings on Magnesium Alloy for Tracheal Stent Applications. ANNALS OF BIOMEDICAL ENGINEERING, 43(5), 1158-1165.Springer Science and Business Media LLC. doi: 10.1007/s10439-014-1169-3.

Saha, P., Jampani, P.H., Datta, M.K., Hong, D., Okoli, C.U., Manivannan, A., & Kumta, P.N. (2015). Electrochemical Performance of Chemically and Solid State-Derived Chevrel Phase Mo6T8 (T = S, Se) Positive Electrodes for Sodium-Ion Batteries. JOURNAL OF PHYSICAL CHEMISTRY C, 119(11), 5771-5782.American Chemical Society (ACS). doi: 10.1021/jp509057w.

Saha, P., Jampani, P.H., Hong, D., Gattu, B., Poston, J.A., Manivannan, A., Datta, M.K., & Kumta, P.N. (2015). Synthesis and electrochemical study of Mg1.5MnO3: A defect spinel cathode for rechargeable magnesium battery. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 202, 8-14.Elsevier BV. doi: 10.1016/j.mseb.2015.08.008.

Saha, P., Roy, M., Datta, M.K., Lee, B., & Kumta, P.N. (2015). Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 57, 294-303.Elsevier BV. doi: 10.1016/j.msec.2015.07.033.

Beck, F.R., Epur, R., Hong, D., Manivannan, A., & Kumta, P.N. (2014). Microwave Derived Facile Approach to Sn/Graphene Composite Anodes for, Lithium-Ion Batteries. ELECTROCHIMICA ACTA, 127, 299-306.Elsevier BV. doi: 10.1016/j.electacta.2014.02.005.

Datta, M.K., Kuruba, R., Jampani, P.H., Chung, S.J., Saha, P., Epur, R., Kadakia, K., Patel, P., Gattu, B., Manivannan, A., & Kumta, P.N. (2014). Electrochemical properties of a new nanocrystalline NaMn2O4 cathode for rechargeable sodium ion batteries. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 188, 1-7.Elsevier BV. doi: 10.1016/j.mseb.2014.05.007.

Datta, M.K., Ramanathan, M., Jampani, P., Saha, P., Epur, R., Kadakia, K., Chung, S.J., Patel, P., Gattu, B., Manivannan, A., & Kumta, P.N. (2014). High energy mechano-chemical milling: Convenient approach to synthesis of LiMn1.5Ni0.5O4 high voltage cathode for lithium ion batteries. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 190, 119-125.Elsevier BV. doi: 10.1016/j.mseb.2014.09.015.

Hanumantha, P.J., Gattu, B., Velikokhatnyi, O., Datta, M.K., Damle, S.S., & Kumta, P.N. (2014). Heterostructures for Improved Stability of Lithium Sulfur Batteries. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 161(6), A1173-A1180.The Electrochemical Society. doi: 10.1149/2.107406jes.

Henderson, S.E., Verdelis, K., Maiti, S., Pal, S., Chung, W.L., Chou, D.T., Kumta, P.N., & Almarza, A.J. (2014). Magnesium alloys as a biomaterial for degradable craniofacial screws. ACTA BIOMATERIALIA, 10(5), 2323-2332.Elsevier BV. doi: 10.1016/j.actbio.2013.12.040.

Kadakia, K., Datta, M.K., Velikokhatnyi, O.I., Jampani, P., Park, S.K., Chung, S.J., & Kumta, P.N. (2014). High performance fluorine doped (Sn,Ru)O-2 oxygen evolution reaction electro-catalysts for proton exchange membrane based water electrolysis. JOURNAL OF POWER SOURCES, 245(2013), 362-370.Elsevier BV. doi: 10.1016/j.jpowsour.2013.06.099.

Kadakia, K., Datta, M.K., Velikokhatnyi, O.I., Jampani, P.H., & Kumta, P.N. (2014). Fluorine doped (Ir,Sn,Nb)O-2 anode electro-catalyst for oxygen evolution via PEM based water electrolysis. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 39(2), 664-674.Elsevier BV. doi: 10.1016/j.ijhydene.2013.10.123.

Kadakia, K.S., Datta, M.K., Velikokhatnyi, O.I., Hanumantha, P.J., Park, S.K., Chung, S.J., Hong, D.H., Poston, J.A., Manivanan, A., & Kumta, P.N. (2014). A Complexed Sol-Gel (CSG) Approach to High Surface Area (HSA) Durable Ultra Active Platinum-Ruthenium Electro-Catalysts for Direct Methanol Fuel Cells. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 161(10), F1053-F1060.The Electrochemical Society. doi: 10.1149/2.0711410jes.

Kadakia, K.S., Jampani, P., Velikokhatnyi, O.I., Daita, M.K., Chung, S.J., Poston, J.A., Manivannan, A., & Kumta, P.N. (2014). Nanostructured (Ir,Sn)O-2:F - Oxygen Evolution Reaction Anode Electro-Catalyst Powders for PEM Based Water Electrolysis. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 161(9), F868-F875.The Electrochemical Society. doi: 10.1149/2.0381409jes.

Kadakia, K.S., Jampani, P.H., Velikokhatnyi, O.I., Datta, M.K., Park, S.K., Hong, D.H., Chung, S.J., & Kumta, P.N. (2014). Nanostructured F doped IrO2 electro-catalyst powders for PEM based water electrolysis. JOURNAL OF POWER SOURCES, 269, 855-865.Elsevier BV. doi: 10.1016/j.jpowsour.2014.07.045.

Luffy, S.A., Chou, D.T., Waterman, J., Wearden, P.D., Kumta, P.N., & Gilbert, T.W. (2014). Evaluation of magnesium-yttrium alloy as an extraluminal tracheal stent. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 102(3), 611-620.Wiley. doi: 10.1002/jbm.a.34731.

Pal, S., Damle, S.S., Patel, S.H., Datta, M.K., Kumta, P.N., & Maiti, S. (2014). Modeling the delamination of amorphous-silicon thin film anode for lithium-ion battery. JOURNAL OF POWER SOURCES, 246(2014), 149-159.Elsevier BV. doi: 10.1016/j.jpowsour.2013.06.089.

Richardson, T., Kumta, P.N., & Banerjee, I. (2014). Alginate Encapsulation of Human Embryonic Stem Cells to Enhance Directed Differentiation to Pancreatic Islet-Like Cells. TISSUE ENGINEERING PART A, 20(23-24), 3198-3211.Mary Ann Liebert Inc. doi: 10.1089/ten.tea.2013.0659.

Saha, P., Datta, M.K., Velikokhatnyi, O.I., Manivannan, A., Alman, D., & Kumta, P.N. (2014). Rechargeable magnesium battery: Current status and key challenges for the future. PROGRESS IN MATERIALS SCIENCE, 66, 1-86.Elsevier BV. doi: 10.1016/j.pmatsci.2014.04.001.

Saha, P., Jampani, P.H., Datta, M.K., Okoli, C.U., Manivannan, A., & Kumta, P.N. (2014). A Convenient Approach to Mo6S8 Chevrel Phase Cathode for Rechargeable Magnesium Battery. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 161(4), A593-A598.The Electrochemical Society. doi: 10.1149/2.061404jes.

Singh, S.S., Roy, A., Lee, B.E., Banerjee, I., & Kumta, P.N. (2014). MC3T3-E1 proliferation and differentiation on biphasic mixtures of Mg substituted beta-tricalcium phosphate and amorphous calcium phosphate. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 45, 589-598.Elsevier BV. doi: 10.1016/j.msec.2014.03.032.

Singh, S.S., Roy, A., Lee, B.E., Ohodnicki, J., Loghmanian, A., Banerjee, I., & Kumta, P.N. (2014). A study of strontium doped calcium phosphate coatings on AZ31. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 40, 357-365.Elsevier BV. doi: 10.1016/j.msec.2014.03.062.

Syed-Picard, F.N., Jr, R.H.L., Kumta, P.N., & Sfeir, C. (2014). Scaffoldless Tissue-engineered Dental Pulp Cell Constructs for Endodontic Therapy. JOURNAL OF DENTAL RESEARCH, 93(3), 250-255.SAGE Publications. doi: 10.1177/0022034513517901.

Task, K., D'Amore, A., Singh, S., Candiello, J., Jaramillo, M., Wagner, W.R., Kumta, P., & Banerjee, I. (2014). Systems level approach reveals the correlation of endoderm differentiation of mouse embryonic stem cells with specific microstructural cues of fibrin gels. JOURNAL OF THE ROYAL SOCIETY INTERFACE, 11(95), 20140009.The Royal Society. doi: 10.1098/rsif.2014.0009.

Candiello, J., Singh, S.S., Task, K., Kumta, P.N., & Banerjee, I. (2013). Early differentiation patterning of mouse embryonic stem cells in response to variations in alginate substrate stiffness. JOURNAL OF BIOLOGICAL ENGINEERING, 7(1), 9.Springer Science and Business Media LLC. doi: 10.1186/1754-1611-7-9.

Chou, D.T., Hong, D., Saha, P., Ferrero, J., Lee, B., Tan, Z., Dong, Z., & Kumta, P.N. (2013). In vitro and in vivo corrosion, cytocompatibility and mechanical properties of biodegradable Mg-Y-Ca-Zr alloys as implant materials. ACTA BIOMATERIALIA, 9(10), 8518-8533.Elsevier BV. doi: 10.1016/j.actbio.2013.06.025.

Chou, D.T., Wells, D., Hong, D., Lee, B., Kuhn, H., & Kumta, P.N. (2013). Novel processing of iron-manganese alloy-based biomaterials by inkjet 3-D printing. ACTA BIOMATERIALIA, 9(10), 8593-8603.Elsevier BV. doi: 10.1016/j.actbio.2013.04.016.

Datta, M.K., Epur, R., Saha, P., Kadakia, K., Park, S.K., & Kuma, P.N. (2013). Tin and graphite based nanocomposites: Potential anode for sodium ion batteries. JOURNAL OF POWER SOURCES, 225(2013), 316-322.Elsevier BV. doi: 10.1016/j.jpowsour.2012.10.014.

Datta, M.K., Kadakia, K., Velikokhatnyi, O.I., Jampani, P.H., Chung, S.J., Poston, J.A., Manivannan, A., & Kumta, P.N. (2013). High performance robust F-doped tin oxide based oxygen evolution electro-catalysts for PEM based water electrolysis. JOURNAL OF MATERIALS CHEMISTRY A, 1(12), 4026-4037.Royal Society of Chemistry (RSC). doi: 10.1039/c3ta01458d.

Epur, R., Minardi, L., Datta, M.K., Chung, S.J., & Kumta, P.N. (2013). A simple facile approach to large scale synthesis of high specific surface area silicon nanoparticles. JOURNAL OF SOLID STATE CHEMISTRY, 208(2013), 93-98.Elsevier BV. doi: 10.1016/j.jssc.2013.09.002.

Hanumantha, P.J., Datta, M.K., Kadakia, K.S., Hong, D.H., Chung, S.J., Tam, M.C., Poston, J.A., Manivannan, A., & Kumta, P.N. (2013). A Simple Low Temperature Synthesis of Nanostructured Vanadium Nitride for Supercapacitor Applications. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 160(11), A2195-A2206.The Electrochemical Society. doi: 10.1149/2.081311jes.

Hong, D., Saha, P., Chou, D.T., Lee, B., Collins, B.E., Tan, Z., Dong, Z., & Kumta, P.N. (2013). In vitro degradation and cytotoxicity response of Mg-4% Zn-0.5% Zr (ZK40) alloy as a potential biodegradable material. ACTA BIOMATERIALIA, 9(10), 8534-8547.Elsevier BV. doi: 10.1016/j.actbio.2013.07.001.

Jampani, P.H., Kadakia, K., Hong, D.H., Epur, R., Poston, J.A., Manivannan, A., & Kumta, P.N. (2013). CVD Derived Vanadium Oxide Nano-Sphere-Carbon Nanotube (CNT) Nano-Composite Hetero-Structures: High Energy Supercapacitors. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 160(8), A1118-A1127.The Electrochemical Society. doi: 10.1149/2.033308jes.

Kadakia, K., Datta, M.K., Jampani, P.H., Park, S.K., & Kumta, P.N. (2013). Novel F-doped IrO2 oxygen evolution electrocatalyst for PEM based water electrolysis. JOURNAL OF POWER SOURCES, 222(2013), 313-317.Elsevier BV. doi: 10.1016/j.jpowsour.2012.08.051.

Kadakia, K., Datta, M.K., Jampani, P.H., Park, S.K., & Kumta, P.N. (2013). Novel F-doped IrO2 oxygen evolution electrocatalyst for PEM based water electrolysis. Journal of Power Sources, 222, 313-317. doi: 10.1016/jjpowsour.2012.08.051.

Kunjukunju, S., Roy, A., Ramanathan, M., Lee, B., Candiello, J.E., & Kumta, P.N. (2013). A layer-by-layer approach to natural polymer-derived bioactive coatings on magnesium alloys. ACTA BIOMATERIALIA, 9(10), 8690-8703.Elsevier BV. doi: 10.1016/j.actbio.2013.05.013.

Lee, D., Ahn, G., & Kumta, P.N. (2013). Nano-Sized Calcium Phosphate (CaP) Carriers for Non-Viral Gene/Drug Delivery. In Nanomaterials in Drug Delivery, Imaging, and Tissue Engineering. (pp. 203-236).John Wiley & Sons, Inc. doi: 10.1002/9781118644591.ch6.

Lv, D., Xu, T., Saha, P., Datta, M.K., Gordin, M.L., Manivannan, A., Kumta, P.N., & Wang, D. (2013). A Scientific Study of Current Collectors for Mg Batteries in Mg(AlCl2EtBu)(2)/THF Electrolyte. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 160(2), A351-A355.The Electrochemical Society. doi: 10.1149/2.085302jes.

Ostrowski, N., Lee, B., Enick, N., Carlson, B., Kunjukunju, S., Roy, A., & Kumta, P.N. (2013). Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-by-layer coatings on AZ31 magnesium alloys. ACTA BIOMATERIALIA, 9(10), 8704-8713.Elsevier BV. doi: 10.1016/j.actbio.2013.05.010.

Ostrowski, N.J., Lee, B., Roy, A., Ramanathan, M., & Kumta, P.N. (2013). Biodegradable poly(lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 24(1), 85-96.Springer Science and Business Media LLC. doi: 10.1007/s10856-012-4773-5.

Pal, S., Damle, S.S., Kumta, P.N., & Maiti, S. (2013). Modeling of lithium segregation induced delamination of a-Si thin film anode in Li-ion batteries. COMPUTATIONAL MATERIALS SCIENCE, 79, 877-887.Elsevier BV. doi: 10.1016/j.commatsci.2013.06.051.

Velikokhatnyi, O.I., Kadakia, K., Datta, M.K., & Kumta, P.N. (2013). Fluorine-Doped IrO2: A Potential Electrocatalyst for Water Electrolysis. JOURNAL OF PHYSICAL CHEMISTRY C, 117(40), 20542-20547.American Chemical Society (ACS). doi: 10.1021/jp308947h.

Datta, M.K., Sipe, D.M., Ke, Y., Lee, B., Devaty, P.R., Choyke, W.J., Campbell, P.G., & Kumta, P.N. (2012). Biocompatible Sol–Gel Based Nanostructured Hydroxyapatite Coatings on Nano-porous SiC. In Silicon Carbide Biotechnology. (pp. 333-349).Elsevier. doi: 10.1016/b978-0-12-385906-8.00009-x.

Epur, R., Datta, M.K., & Kumta, P.N. (2012). Nanoscale engineered electrochemically active silicon-CNT heterostructures-novel anodes for Li-ion application. ELECTROCHIMICA ACTA, 85(2012), 680-684.Elsevier BV. doi: 10.1016/j.electacta.2012.08.054.

Epur, R., Ramanathan, M., Beck, F.R., Manivannan, A., & Kumta, P.N. (2012). Electrodeposition of amorphous silicon anode for lithium ion batteries. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177(14), 1151-1156.Elsevier BV. doi: 10.1016/j.mseb.2012.04.027.

Kadakia, K., Datta, M.K., Velikokhatnyi, O.I., Jampani, P., Park, S.K., Saha, P., Poston, J.A., Manivannan, A., & Kumta, P. (2012). Novel (Ir,Sn,Nb)O2 anode electrocatalysts with reduced noble metal content for PEM based water electrolysis. International Journal of Hydrogen Energy, 37(2012), 3001-3013.

Kadakia, K., Datta, M.K., Velikokhatnyi, O.I., Jampani, P., Park, S.K., Saha, P., Poston, J.A., Manivannan, A., & Kumta, P.N. (2012). Novel (Ir,Sn,Nb)O-2 anode electrocatalysts with reduced noble metal content for PEM based water electrolysis. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 37(4), 3001-3013.Elsevier BV. doi: 10.1016/j.ijhydene.2011.11.055.

Kumta, P.N., & Hosono, H. (2012). The Fifth International Conference on the Science and Technology for Advanced Ceramics (STAC-5) and the Second International Conference on Advanced Materials Development and Integration of Novel Structured Metallic and Inorganic Materials (AIMDI2) – June 22–24, 2011. Materials Science and Engineering: B, 177(7), 499.Elsevier BV. doi: 10.1016/j.mseb.2012.03.026.

Lee, D., Upadhye, K., & Kumta, P.N. (2012). Nano-sized calcium phosphate (CaP) carriers for non-viral gene delivery. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177(3), 289-302.Elsevier BV. doi: 10.1016/j.mseb.2011.11.001.

Lee, D.H., Upadhye, K., & Kumta, P. (2012). Review: Nano-Sized Calcium Phosphate (CaP) Carriers and Polymer-CaP Hybrid Systems for Non-Viral Gene Delivery. Materials Science and Engineering B, 177, 289-302.

Sun, A., Beck, F.R., Haynes, D., Jr, P.J.A., Narayanan, S.R., Kumta, P.N., & Manivannan, A. (2012). Synthesis, characterization, and electrochemical studies of chemically synthesized NaFePO4. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 177(20), 1729-1733.Elsevier BV. doi: 10.1016/j.mseb.2012.08.004.

Velikokhatnyi, O.I., & Kumta, P.N. (2012). Exploring calcium tantalates and niobates as prospective catalyst supports for water electrolysis. JOURNAL OF POWER SOURCES, 202, 190-199.Elsevier BV. doi: 10.1016/j.jpowsour.2011.11.022.

Velikokhatnyi, O.I., Kadakia, K., Park, S.K., & Kumta, P.N. (2012). Theoretical Study of Magnesium and Zinc Tantalates and Niobates as Prospective Catalyst Supports for Water Electrolysis. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 159(10), F607-F616.The Electrochemical Society. doi: 10.1149/2.007210jes.

Zhang, X., Jaramillo, M., Singh, S., Kumta, P., & Banerjee, I. (2012). Analysis of Regulatory Network Involved in Mechanical Induction of Embryonic Stem Cell Differentiation. In Cooney, A.J. (Ed.). PLOS ONE, 7(4), e35700.Public Library of Science (PLoS). doi: 10.1371/journal.pone.0035700.

Atthipalli, G., Epur, R., Kumta, P.N., & Gray, J.L. (2011). Ferrocene and Inconel assisted growth of dense carbon nanotube forests on copper foils. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 29(4), 04D102.American Vacuum Society. doi: 10.1116/1.3591428.

Atthipalli, G., Epur, R., Kumta, P.N., Allen, B.L., Tang, Y., Star, A., & Gray, J.L. (2011). The effect of temperature on the growth of carbon nanotubes on copper foil using a nickel thin film as catalyst. THIN SOLID FILMS, 519(16), 5371-5375.Elsevier BV. doi: 10.1016/j.tsf.2011.02.046.

Atthipalli, G., Epur, R., Kumta, P.N., Yang, M., Lee, J.K., & Gray, J.L. (2011). Nickel Catalyst-Assisted Vertical Growth of Dense Carbon Nanotube Forests on Bulk Copper. JOURNAL OF PHYSICAL CHEMISTRY C, 115(9), 3534-3538.American Chemical Society (ACS). doi: 10.1021/jp108624n.

Choi, D., & Kumta, P.N. (2011). Synthesis and Characterization of Nanostructured Niobium and Molybdenum Nitrides by a Two-Step Transition Metal Halide Approach. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 94(8), 2371-2378.Wiley. doi: 10.1111/j.1551-2916.2011.04412.x.

Chung, S.J., Roy, A., Hong, D., Leonard, J.P., & Kumta, P.N. (2011). Microstructure of Mg-Zn-Ca thin film derived by pulsed laser deposition. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1690-1694.Elsevier BV. doi: 10.1016/j.mseb.2011.08.006.

Datta, M.K., Chou, D.T., Hong, D., Saha, P., Chung, S.J., Lee, B., Sirinterlikci, A., Ramanathan, M., Roy, A., & Kumta, P.N. (2011). Structure and thermal stability of biodegradable Mg-Zn-Ca based amorphous alloys synthesized by mechanical alloying. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1637-1643.Elsevier BV. doi: 10.1016/j.mseb.2011.08.008.

Datta, M.K., Maranchi, J., Chung, S.J., Epur, R., Kadakia, K., Jampani, P., & Kumta, P.N. (2011). Amorphous silicon-carbon based nano-scale thin film anode materials for lithium ion batteries. ELECTROCHIMICA ACTA, 56(13), 4717-4723.Elsevier BV. doi: 10.1016/j.electacta.2011.01.124.

Datta, M.K., Maranchi, J., Jae, S., Epur , R., Kadakia, K., Jampani, P., & Kumta, P. (2011). Amorphous Silicon-Carbon based thin film Anode Materials for Lithium Ion Batteries. Electrochimica Acta, 56(2011), 4717-4723.

Olton, D.Y.E., Close, J.M., Sfeir, C.S., & Kumta, P.N. (2011). Intracellular trafficking pathways involved in the gene transfer of nano-structured calcium phosphate-DNA particles. BIOMATERIALS, 32(30), 7662-7670.Elsevier BV. doi: 10.1016/j.biomaterials.2011.01.043.

Roy, A., Singh, S.S., Datta, M.K., Lee, B., Ohodnicki, J., & Kumta, P.N. (2011). Novel sol-gel derived calcium phosphate coatings on Mg4Y alloy. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1679-1689.Elsevier BV. doi: 10.1016/j.mseb.2011.08.007.

Sangeetha, K., Roy, A., Singh, S., Lee, B., & Kumta, P.N. (2011). Novel alginate based coatings on Mg alloys. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1703-1710.Elsevier BV. doi: 10.1016/j.mseb.2011.08.004.

Sfeir, C., Lee, D., Li, J., Zhang, X., Boskey, A.L., & Kumta, P.N. (2011). Expression of Phosphophoryn Is Sufficient for the Induction of Matrix Mineralization by Mammalian Cells. JOURNAL OF BIOLOGICAL CHEMISTRY, 286(23), 20228-20238.Elsevier BV. doi: 10.1074/jbc.M110.209528.

Singh, S.S., Roy, A., Lee, B., & Kumta, P.N. (2011). Aqueous deposition of calcium phosphates and silicate substituted calcium phosphates on magnesium alloys. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1695-1702.Elsevier BV. doi: 10.1016/j.mseb.2011.08.005.

Staiger, M.P., Feyerabend, F., Willumeit, R., Sfeir, C.S., Zheng, Y.F., Virtanen, S., Mueeller, W.D., Atrens, A., Peuster, M., Kumta, P.N., Mantovani, D., & Witte, F. (2011). Summary of the panel discussions at the 2nd Symposium on Biodegradable Metals, Maratea, Italy, 2010. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1596-1599.Elsevier BV. doi: 10.1016/j.mseb.2011.09.032.

Velikokhatnyi, O., & Kumta, P. (2011). Ab-initio Study of Fluorine-doped Tin Dioxide: A Prospective Catalyst Support for Water Electrolysis. Physica B, 406, 471-477.

Velikokhatnyi, O.I., & Kumta, P.N. (2011). Ab-initio study of fluorine-doped tin dioxide: A prospective catalyst support for water electrolysis. PHYSICA B-CONDENSED MATTER, 406(3), 471-477.Elsevier BV. doi: 10.1016/j.physb.2010.11.015.

Wang, W., Epur, R., & Kumta, P.N. (2011). Vertically aligned silicon/carbon nanotube (VASCNT) arrays: Hierarchical anodes for lithium-ion battery. ELECTROCHEMISTRY COMMUNICATIONS, 13(5), 429-432.Elsevier BV. doi: 10.1016/j.elecom.2011.02.012.

Wu, K., Dogan, O.N., Velikokhatnyi, O.I., & Kumta, P.N. (2011). A CALPHAD study on the thermodynamic stability of calcium-, zinc-, and yttrium-doped magnesium in aqueous environments. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 176(20), 1727-1732.Elsevier BV. doi: 10.1016/j.mseb.2011.04.016.

Alyousef, Y.M., Datta, M.K., Kadakia, K., Yao, S.C., & Kumta, P.N. (2010). Sol-gel synthesis of Pt-Ru-Os-Ir based anode electro-catalysts for direct methanol fuel cells. JOURNAL OF ALLOYS AND COMPOUNDS, 506(2), 698-702.Elsevier BV. doi: 10.1016/j.jallcom.2010.07.046.

Costello, B.J., Shah, G., Kumta, P., & Sfeir, C.S. (2010). Regenerative Medicine for Craniomaxillofacial Surgery. ORAL AND MAXILLOFACIAL SURGERY CLINICS OF NORTH AMERICA, 22(1), 33-+.Elsevier BV. doi: 10.1016/j.coms.2009.10.009.

Jampani, P.H., Manivannan, A., & Kumta, P.N. (2010). Advancing the Supercapacitor Materials and Technology Frontier for Improving Power Quality. The Electrochemical Society Interface, 19(3), 57-62.The Electrochemical Society. doi: 10.1149/2.f07103if.

Ko, H.F., Sfeir, C., & Kumta, P. (2010). Novel Synthesis Strategies for Natural Polymer and Composite Biomaterials as Potential Scaffolds for Tissue Engineering. Advanced Processing of Biomaterials, Philosophical Transactions A, 368, 1981-1997.

Ko, H.F., Sfeir, C., & Kumta, P.N. (2010). Novel synthesis strategies for natural polymer and composite biomaterials as potential scaffolds for tissue engineering. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 368(1917), 1981-1997.The Royal Society. doi: 10.1098/rsta.2010.0009.

Lee, D., & Kumta, P.N. (2010). Chemical synthesis and stabilization of magnesium substituted brushite. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 30(7), 934-943.Elsevier BV. doi: 10.1016/j.msec.2010.04.007.

Lee, D., & Kumta, P.N. (2010). Chemical synthesis and characterization of magnesium substituted amorphous calcium phosphate (MG-ACP). MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 30(8), 1313-1317.Elsevier BV. doi: 10.1016/j.msec.2010.05.009.

Velikokhatnyi, O.I., & Kumta, P.N. (2010). First-principles studies on alloying and simplified thermodynamic aqueous chemical stability of calcium-, zinc-, aluminum-, yttrium- and iron-doped magnesium alloys. ACTA BIOMATERIALIA, 6(5), 1698-1704.Elsevier BV. doi: 10.1016/j.actbio.2009.08.016.

Wang, W., & Kumta, P.N. (2010). Nanostructured Hybrid Silicon/Carbon Nanotube Heterostructures: Reversible High-Capacity Lithium-Ion Anodes. ACS NANO, 4(4), 2233-2241.American Chemical Society (ACS). doi: 10.1021/nn901632g.

Alyousef, Y.M., Datta, M.K., Yao, S.C., & Kumta, P.N. (2009). Complexed sol-gel synthesis of improved Pt-Ru-Os-based anode electro-catalysts for direct methanol fuel cells. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 70(6), 1019-1023.Elsevier BV. doi: 10.1016/j.jpcs.2009.05.014.

Datta, M.K., & Kumta, P.N. (2009). In situ electrochemical synthesis of lithiated silicon-carbon based composites anode materials for lithium ion batteries. JOURNAL OF POWER SOURCES, 194(2), 1043-1052.Elsevier BV. doi: 10.1016/j.jpowsour.2009.06.033.

Lee, D., Sfeir, C., & Kumta, P.N. (2009). Novel in-situ synthesis and characterization of nanostructured magnesium substituted beta-tricalcium phosphate (beta-TCMP). MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 29(1), 69-77.Elsevier BV. doi: 10.1016/j.msec.2008.05.017.

Nanda, J., Datta, M.K., Remillard, J.T., O'Neill, A., & Kumta, P.N. (2009). In situ Raman microscopy during discharge of a high capacity silicon-carbon composite Li-ion battery negative electrode. ELECTROCHEMISTRY COMMUNICATIONS, 11(1), 235-237.Elsevier BV. doi: 10.1016/j.elecom.2008.11.006.

Narayan, R.J., Kumta, P.N., & Wagner, W.R. (2009). Ceramic Transactions: Preface. 206.

Teki, R., Datta, M.K., Krishnan, R., Parker, T.C., Lu, T.M., Kumta, P., & Koratkar, N. (2009). Nanostructured Silicon Anodes for Lithium Ion Rechargeable Batteries. Small, 5(20), 2236-2242.

Teki, R., Datta, M.K., Krishnan, R., Parker, T.C., Lu, T.M., Kumta, P.N., & Koratkar, N. (2009). Nanostructured Silicon Anodes for Lithium Ion Rechargeable Batteries. SMALL, 5(20), 2236-2242.Wiley. doi: 10.1002/smll.200900382.

Velikokhatnyi, O.I., & Kumta, P. (2009). Exploring Tin Tantalates and Niobates as Prospective Catalyst Supports for Water Electrolysis. Physica B: Physics of Condensed Matter, 404(12-12).

Yun, Y., Dong, Z., Yang, D., Schulz, M.J., Shanov, V.N., Yarmolenko, S., Xu, Z., Kumta, P., & Sfeir, C. (2009). Biodegradable Mg corrosion and osteoblast cell culture studies. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 29(6), 1814-1821.Elsevier BV. doi: 10.1016/j.msec.2009.02.008.

Kumta, P.N. (2008). Untitled. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 150(1), 1.Elsevier BV. doi: 10.1016/j.mseb.2008.01.008.

Choi, D., & Kumta, P. (2007). Mechanochemical Synthesis and Characterization of Nanostructured ¿-Tri-calcium phosphate (TCP). Materials Science and Engineering C, 27, 377-381.

Choi, D., & Kumta, P.N. (2007). Surfactant based sol-gel approach to nanostructured LiFePO4 for high rate Li-ion batteries. JOURNAL OF POWER SOURCES, 163(2), 1064-1069.Elsevier BV. doi: 10.1016/j.jpowsour.2006.09.082.

Choi, D., & Kumta, P.N. (2007). Synthesis, structure, and electrochemical characterization of nanocrystalline tantalum and tungsten nitrides. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 90(10), 3113-3120.Wiley. doi: 10.1111/j.1551-2916.2007.01873.x.

Choi, D., & Kumta, P.N. (2007). Mechano-chemical synthesis and characterization of nanostructured beta-TCP powder. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 27(3), 377-381.Elsevier BV. doi: 10.1016/j.msec.2006.05.035.

Datta, M.K., & Kumta, P.N. (2007). Silicon, graphite and resin based hard carbon nanocomposite anodes for lithium ion batteries. JOURNAL OF POWER SOURCES, 165(1), 368-378.Elsevier BV. doi: 10.1016/j.jpowsour.2006.12.013.

Ko, H., Sfeir, C., & Kumta, P. (2007). In situ synthesis and characterization of porous polymer-ceramic composites as scaffolds for gene delivery. Materials Science and Engineering C, 27, 479-483.

Ko, H.F., Sfeir, C., & Kumta, P.N. (2007). In situ synthesis and characterization of porous polymer-ceramic composites as scaffolds for gene delivery. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 27(3), 479-483.Elsevier BV. doi: 10.1016/j.msec.2006.05.045.

Olton, D., Li, J., Wilson, M.E., Rogers, T., Close, J., Huang, L., Kumta, P.N., & Sfeir, C. (2007). Nanostructured calcium phosphates (NanoCaPs) for non-viral gene delivery: Influence of the synthesis parameters on transfection efficiency. BIOMATERIALS, 28(6), 1267-1279.Elsevier BV. doi: 10.1016/j.biomaterials.2006.10.026.

Rock, N.L., & Kumta, P.N. (2007). Synthesis and characterization of electrochemically active graphite-silicon-tin composite anodes for Li-ion applications. JOURNAL OF POWER SOURCES, 164(2), 829-838.Elsevier BV. doi: 10.1016/j.jpowsour.2006.10.068.

Velikokhatnyi, O.I., & Kumta, P.N. (2007). Energetics of the lithium-magnesium imide-magnesium amide and lithium hydride reaction for hydrogen storage: An ab initio study. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 140(1-2), 114-122.Elsevier BV. doi: 10.1016/j.mseb.2007.04.010.

Wang, W., & Kumta, P.N. (2007). Reversible high capacity nanocomposite anodes of Si/C/SWNTs for rechargeable Li-ion batteries. JOURNAL OF POWER SOURCES, 172(2), 650-658.Elsevier BV. doi: 10.1016/j.jpowsour.2007.05.025.

Wang, W., Datta, M.K., & Kumta, P. (2007). Silicon based Composite Anodes for Li-Ion Rechargeable Batteries. J. Materials Chemistry, 17, 1-10.

Wang, W., Datta, M.K., & Kumta, P.N. (2007). Silicon-based composite anodes for Li-ion rechargeable batteries. JOURNAL OF MATERIALS CHEMISTRY, 17(30), 3229-3237.Royal Society of Chemistry (RSC). doi: 10.1039/B705311H.

Choi, D., & Kumta, P.N. (2006). Nanocrystalline TiN derived by a two-step halide approach for electrochemical capacitors. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 153(12), A2298-A2303.The Electrochemical Society. doi: 10.1149/1.2359692.

Choi, D., & Kumta, P.N. (2006). An alternative chemical route for the synthesis and thermal stability of chemically enriched hydroxyapatite. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 89(2), 444-449.Wiley. doi: 10.1111/j.1551-2916.2005.00738.x.

Choi, D., Blomgren, G.E., & Kumta, P.N. (2006). Fast and reversible surface redox reaction in nanocrystalline vanadium nitride supercapacitors. ADVANCED MATERIALS, 18(9), 1178-+.Wiley. doi: 10.1002/adma.200502471.

Datta, M., & Kumta, P. (2006). Silicon and carbon based composite anodes for lithium ion batteries. J. of Power Sources, 158(2006), 557-563.

Datta, M.K., & Kumta, P.N. (2006). Silicon and carbon based composite anodes for lithium ion batteries. JOURNAL OF POWER SOURCES, 158(1), 557-563.Elsevier BV. doi: 10.1016/j.jpowsour.2005.09.016.

Dogan, F., & Kumta, P. (2006). Ceramic Transactions: Preface. 179.

Maranchi, J.P., Hepp, A.F., Evans, A.G., Nuhfer, N.T., & Kumta, P.N. (2006). Interfacial properties of the a-Si/Cu : active-inactive thin-film anode system for lithium-ion batteries. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 153(6), A1246-A1253.The Electrochemical Society. doi: 10.1149/1.2184753.

Petricca, S.E., Marra, K.G., & Kumta, P.N. (2006). Chemical synthesis of poly(lactic-co-glycolic acid)/hydroxyapatite composites for orthopaedic applications. ACTA BIOMATERIALIA, 2(3), 277-286.Elsevier BV. doi: 10.1016/j.actbio.2005.12.004.

Velikokhatnyi, O.I., Choi, D., & Kumta, P.N. (2006). Effect of boron on the stability of monoclinic NaMnO2: Theoretical and experimental studies. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 128(1-3), 115-124.Elsevier BV. doi: 10.1016/j.mseb.2005.11.025.

Chang, C.C., & Kumta, P.N. (2005). Mechanochemical synthesis of LiNiO2. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 116(3), 341-345.Elsevier BV. doi: 10.1016/j.mseb.2004.05.042.

Choi, D., & Kumta, P. (2005). Chemically Synthesized VN for Pseudocapacitor Application. Electrochemical and Solid-State Letters, 8(8), A418-A422.

Choi, D.W., & Kumta, P.N. (2005). Synthesis of nanostructured TiN using a two-step transition metal halide approach. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 88(8), 2030-2035.Wiley. doi: 10.1111/j.1551-2916.2005.00367.x.

Choi, D.W., & Kumta, P.N. (2005). Chemically synthesized nanostructured VN for pseudocapacitor application. ELECTROCHEMICAL AND SOLID STATE LETTERS, 8(8), A418-A422.The Electrochemical Society. doi: 10.1149/1.1951201.

Kim, I.S., Blomgren, G.E., & Kumta, P.N. (2005). Study of electrochemical inactivity of nanocomposites generated using high-energy mechanical milling. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 152(1), A248-A254.The Electrochemical Society. doi: 10.1149/1.1834894.

Kumta, P.N., Sfeir, C., Lee, D.H., Olton, D., & Choi, D. (2005). Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization. ACTA BIOMATERIALIA, 1(1), 65-83.Elsevier BV. doi: 10.1016/j.actbio.2004.09.008.

Manthiram, A., Kumta, P.N., Sundaram, S.K., & Chan, S.W. (2005). Ceramic Transactions: Preface. 161.

Maranchi, J.P., Hepp, A.F., & Kumta, P.N. (2005). LiCoO2 and SnO2 thin battery applications film electrodes for lithium-ion battery applications. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 116(3), 327-340.Elsevier BV. doi: 10.1016/j.mseb.2004.05.041.

Maranchi, J.P., Velikokhatnyi, O.I., Datta, M.K., Kim, I.S., & Kumta, P.N. (2005). Ceramic materials for lithium-ion battery applications. In Chemical Processing of Ceramics, Second Edition. (pp. 667-712).

Patel, P., Kim, I.S., & Kumta, P.N. (2005). Nanocomposites of silicon/titanium carbide synthesized using high-energy mechanical milling for use as anodes in lithium-ion batteries. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 116(3), 347-352. doi: 10.1016/j.mseb.2004.05.046.

Boduch-Lee, K.A., Chapman, T., Petricca, S.E., Marra, K.G., & Kumta, P. (2004). Design and synthesis of hydroxyapatite composites containing an mPEG-dendritic poly(L-lysine) star polycaprolactone. MACROMOLECULES, 37(24), 8959-8966.American Chemical Society (ACS). doi: 10.1021/ma0493630.

Calvert, J.W., Brenner, K.A., Mooney, M.P., Kumta, P., & Weiss, L.E. (2004). Cellular fusion of hydroxyapatite layers: Solid freeform fabrication of synthetic bone grafts. Rivista Italiana di Chirurgia Plastica, 36(3), 145-150.

Chang, C.C., Velikokhatnyi, O.I., & Kumta, P.N. (2004). Effect of magnesium substitution in lithium nickel oxide - An ab initio study. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 151(12), J91-J94.The Electrochemical Society. doi: 10.1149/1.1809584.

Choi, D., Marra, K., & Kumta, P. (2004). In-Situ Chemical Synthesis of Hydroxyapatite/Poly(¿-caprolactone) Composites. Materials Research Bulletin, 39, 417-432.

Choi, D.W., Marra, K.G., & Kumta, P.N. (2004). Chemical synthesis of hydroxyapatite/poly(epsilon-caprolactone) composites. MATERIALS RESEARCH BULLETIN, 39(3), 417-432.Elsevier BV. doi: 10.1016/j.materresbull.2003.10.013.

Kim, I.S., & Kumta, P.N. (2004). Sol-gel synthesis and characterization of nanostructured hydroxyapatite powder. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 111(2-3), 232-236.Elsevier BV. doi: 10.1016/j.mseb.2004.04.011.

Kim, I.S., & Kumta, P.N. (2004). High capacity Si/C nanocomposite anodes for Li-ion batteries. JOURNAL OF POWER SOURCES, 136(1), 145-149.Elsevier BV. doi: 10.1016/j.jpowsour.2004.05.016.

Kim, I.S., Blomgren, G.E., & Kumta, P.N. (2004). Sn/C composite anodes for Li-ion batteries. ELECTROCHEMICAL AND SOLID STATE LETTERS, 7(3), A44-A48.The Electrochemical Society. doi: 10.1149/1.1643792.

Kim, I.S., Blomgren, G.E., & Kumta, P.N. (2004). Si-SiC nanocomposite anodes synthesized using high-energy mechanical milling. JOURNAL OF POWER SOURCES, 130(1-2), 275-280.Elsevier BV. doi: 10.1016/j.jpowsour.2003.12.014.

Narayan, R.J., Kumta, P.N., Sfeir, C., Lee, D.H., Olton, D., & Choi, D.W. (2004). Nanostructured ceramics in medical devices: Applications and prospects. JOM, 56(10), 38-43.Springer Science and Business Media LLC. doi: 10.1007/s11837-004-0289-x.

Patel, P., Kim, I.S., Maranchi, J., & Kumta, P. (2004). Pyrolysis of an alkyltin/polymer mixture to form a tin/carbon composite for use as an anode in lithium-ion batteries. JOURNAL OF POWER SOURCES, 135(1-2), 273-280.Elsevier BV. doi: 10.1016/j.jpowsour.2004.03.065.

Patel, P., Roy, S., Kim, I.L.S., & Kumta, P.N. (2004). Synthesis and characterization of tin and antimony based composites derived by mechanochemical in situ reduction of oxides. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 111(2-3), 237-241.Elsevier BV. doi: 10.1016/j.mseb.2004.05.036.

Velikokhatnyi, O.I., Chang, C.C., & Kumta, P.N. (2004). Ab initio calculations and structural stability of boron-doped sodium manganese oxide. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 151(1), J8-J13.The Electrochemical Society. doi: 10.1149/1.1633766.

Aoyagi, A., Balkanski, M., & Kumta, P.N. (2003). Celebrating 100 Volumes of Materials Science and Engineering, B. Materials Science and Engineering: B, 100(1), vi.Elsevier BV. doi: 10.1016/s0921-5107(03)00209-5.

Beadic, S.M., Calvert, J.W., Marra, K., Kumta, P., Campbell, P., Mitchell, R., Wigginton, W., Hollinger, J.O., Weiss, L., & Mooney, M.P. (2003). Healing of Rabbit Calvarial Defects Using Caprotite Scaffolds Seeded With Autologous Bone Marrow Stromal Cells. J of Dental Research, 82(2), 131-135.

Kim, I., Blomgren, G.E., & Kumta, P.N. (2003). Nanostructured Si/TiB2 composite anodes for Li-ion batteries. ELECTROCHEMICAL AND SOLID STATE LETTERS, 6(8), A157-A161.The Electrochemical Society. doi: 10.1149/1.1584212.

Kim, I.S., & Kumta, P. (2003). Hydrazide Sol-Gel Synthesis of Titanium Nitride: Precursor Synthesis and Structure. J. Materials Chemistry, 13, 2028-2035.

Kim, I.S., & Kumta, P.N. (2003). Hydrazide sol-gel process: A novel approach, for synthesizing nanostructured titanium nitride. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 98(2), 123-134.Elsevier BV. doi: 10.1016/S0921-5107(02)00595-0.

Kim, I.S., & Kumta, P.N. (2003). Hydrazide sol-gel synthesis of nanostructured titanium nitride: precursor chemistry and phase evolution. JOURNAL OF MATERIALS CHEMISTRY, 13(8), 2028-2035.Royal Society of Chemistry (RSC). doi: 10.1039/b301964k.

Kim, J.Y., Narayanan, S., Waldez, T., & Kumta, P. (2003). Sol-Gel Synthesis of High Surface Area Pt-Ru Electrocatalysts for Direct Methanol Fuel Cells. J. Electrochemical Society, 150(11), A1421-A1431.

Kim, J.Y., Yang, Z.G., Chang, C.C., Valdez, T.I., Narayanan, S.R., & Kumta, P.N. (2003). A sol-gel-based approach to synthesize high-surface-area Pt-Ru catalysts as anodes for DMFCs. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 150(11), A1421-A1431.The Electrochemical Society. doi: 10.1149/1.1612503.

Maranchi, J., Hepp, A.F., & Kumta, P. (2003). High Capacity Reversible Thin Film Silicon Anodes for Lithium-Ion Batteries. Electrochemical and Solid-State Letters, 6(9), A198-A201.

Velikokhatnyi, O., Chang, C.C., & Kumta, P. (2003). Electronic Structure and Stability of NaMnO2. J. Electrochemical Society, 150(9), A1262-A1266.

Velikokhatnyi, O.I., Chang, C.C., & Kumta, P.N. (2003). Phase stability and electronic structure of NaMnO2. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 150(9), A1262-A1266.The Electrochemical Society. doi: 10.1149/1.1600464.

Chang, C.C., Kim, J.Y., & Kumta, P.N. (2002). Influence of crystallite size on the electrochemical properties of chemically synthesized stoichiometric LiNiO2. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 149(9), A1114-A1120.The Electrochemical Society. doi: 10.1149/1.1495495.

Chang, C.C., Kim, J.Y., & Kumta, P.N. (2002). Implications of reaction mechanism and kinetics on the synthesis of stoichiometric LiNiO2. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 149(3), A331-A338.The Electrochemical Society. doi: 10.1149/1.1436082.

Landa, A.I., Chang, C.C., Kumta, P.N., Vitos, L., & Abrikosov, I.A. (2002). Phase stability of Li(Mn100-xCox)O-2 oxides: an ab initio study. SOLID STATE IONICS, 149(3-4), 209-215.Elsevier BV. doi: 10.1016/S0167-2738(02)00403-4.

Chang, C.C., Wang, C.C., & Kumta, P.N. (2001). Chemical synthesis and characterization of lithium orthosilicate (Li4SiO4). MATERIALS & DESIGN, 22(7), 617-623.Elsevier BV. doi: 10.1016/S0261-3069(01)00024-3.

Weil, K.S., & Kumta, P.N. (2001). Synthesis of transition metal nitride powders and coatings using alkanolamine chelated precursors. MATERIALS & DESIGN, 22(7), 605-615.Elsevier BV. doi: 10.1016/S0261-3069(01)00023-1.

Calvert, J.W., Marra, K.G., Cook, L., Kumta, P.N., Dimilla, P.A., & Weiss, L.E. (2000). Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces. Journal of Biomedical Materials Research, 52(2), 279-284. doi: 10.1002/1097-4636(200011)52:2<279::AID-JBM6>3.0.CO;2-8.

Calvert, J.W., Marra, K.G., Cook, L., Kumta, P.N., DiMilla, P.A., & Weiss, L.E. (2000). Characterization of osteoblast-like behavior of cultured bone marrow stromal cells on various polymer surfaces. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 52(2), 279-284.Wiley. doi: 10.1002/1097-4636(200011)52:2<279::AID-JBM6>3.0.CO;2-8.

Chang, C.C., Kim, J.Y., & Kumta, P.N. (2000). Divalent cation incorporated Li(1+x)MMgxO2(1+x) (M = Ni0.75Co0.25): viable cathode materials for rechargeable lithium-ion batteries. JOURNAL OF POWER SOURCES, 89(1), 56-63.Elsevier BV. doi: 10.1016/S0378-7753(00)00393-1.

Chang, C.C., Kim, J.Y., & Kumta, P.N. (2000). Synthesis and electrochemical characterization of divalent cation-incorporated lithium nickel oxide. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 147(5), 1722-1729.The Electrochemical Society. doi: 10.1149/1.1393424.

Kim, I., Kumta, P.N., & Blomgren, G.E. (2000). Si/TiN nanocomposites - Novel anode materials for Li-ion batteries. ELECTROCHEMICAL AND SOLID STATE LETTERS, 3(11), 493-496.The Electrochemical Society. doi: 10.1149/1.1391189.

Kim, J.Y., Chang, K.H., & Kumta, P.N. (2000). Chemically induced reduction: A viable process for synthesizing gamma-TiAl based intermetallic matrix composite powders containing nanocrystalline TiC. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 31(1), 151-159.Springer Science and Business Media LLC. doi: 10.1007/s11663-000-0140-x.

Kim, J.Y., King, D., Kumta, P., & Blomgren, G.E. (2000). 'Chemical Synthesis and Electrochemical Characterization of Tin Oxide Based Composites. J. Electrochemical Society, 147(12), 4411-4420.

Kim, J.Y., King, D.E., Kumta, P.N., & Blomgren, G.E. (2000). Chemical synthesis of tin oxide-based materials for Li-ion battery anodes - Influence of process parameters on the electrochemical behavior. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 147(12), 4411-4420.The Electrochemical Society. doi: 10.1149/1.1394079.

Kim, J.Y., Kumta, P.N., Phillips, B.L., & Risbud, S.H. (2000). A versatile chemical strategy for ultrafine AIN and Al-O-N powders. JOURNAL OF PHYSICAL CHEMISTRY B, 104(33), 7895-7907.American Chemical Society (ACS). doi: 10.1021/jp000671j.

Marra, K.G., Szem, J.W., Kumta, P.N., DiMilla, P.A., & Weiss, L.E. (1999). In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 47(3), 324-335.Wiley. doi: 10.1002/(SICI)1097-4636(19991205)47:3<324::AID-JBM6>3.0.CO;2-Y.

Weil, K.S., Kim, J.Y., & Kumta, P.N. (1999). Synthesis of nanoscale titanium nitride-tungsten nitride alloy powders using a novel complexed precursor. MATERIALS LETTERS, 39(5), 292-297.Elsevier BV. doi: 10.1016/S0167-577X(99)00023-3.

Weil, K.S., Kumta, P.N., & Grins, J. (1999). Revisiting a rare intermetallic ternary nitride, Ni2Mo3N: Crystal structure and property measurements. JOURNAL OF SOLID STATE CHEMISTRY, 146(1), 22-35.Elsevier BV. doi: 10.1006/jssc.1999.8296.

Arunachalam, V.S., Green, M.A., Kumta, P.N., & Hoffman, P.A. (1998). Material Matters. MRS Bulletin, 23(6), 4-7.Springer Science and Business Media LLC. doi: 10.1557/s0883769400030505.

Chang, C.C., & Kumta, P.N. (1998). Particulate sol-gel synthesis and electrochemical characterization of LiMO2 (M=Ni, Ni0.75Co0.25) powders. JOURNAL OF POWER SOURCES, 75(1), 44-55.Elsevier BV. doi: 10.1016/S0378-7753(98)00091-3.

Chang, C.C., Scarr, N., & Kumta, P.N. (1998). Synthesis and electrochemical characterization of LiMO2 (M = Ni, Ni0.75Co0.25) for rechargeable lithium ion batteries. SOLID STATE IONICS, 112(3-4), 329-344.Elsevier BV. doi: 10.1016/S0167-2738(98)00183-0.

Kim, J.Y., & Kumta, P.N. (1998). A novel reductive nitrogenation approach for synthesizing aluminum nitride powders. MATERIALS LETTERS, 34(3-6), 188-195.Elsevier BV. doi: 10.1016/S0167-577X(97)00169-9.

Kim, J.Y., & Kumta, P.N. (1998). Modified sol-gel based approaches for synthesizing borophosphosilicate glasses and glass-ceramics. JOURNAL OF PHYSICAL CHEMISTRY B, 102(30), 5744-5753.American Chemical Society (ACS). doi: 10.1021/jp9730555.

Kumta, P. (1998). Material Challenges in Rechargeable Lithium-Ion Batteries and Direct Methanol Fuel Cells. MRS Bulletin, 23(5), 4-6.

Kumta, P., Gallet, D., Waghray, A., Blomgren, G., & Setter, M. (1998). An Aqueous Chemical Process for the Synthesis of Lithium Cobalt Oxide Powders for Rechargeable Lithium-Ion Batteries. J. Power sources, 72, 91-98.

Kumta, P.N., Gallet, D., Waghray, A., Blomgren, G.E., & Setter, M.P. (1998). Synthesis of LiCoO2 powders for lithium-ion batteries from precursors derived by rotary evaporation. JOURNAL OF POWER SOURCES, 72(1), 91-98.Elsevier BV. doi: 10.1016/S0378-7753(97)02680-3.

Sriram, M.A., & Kumta, P. (1998). Thio-Sol-Gel Synthesis of Titanium Sulfide: Part II- Defect Structure, Morphology and Electrochemical Characteristics. J. Materials Chemistry, 8(11), 2453-2463.

Sriram, M.A., & Kumta, P. (1998). Thio-Sol-Gel Synthesis of Titanium Sulfide: Part I- Solution and Precursor Chemistry. J. Materials Chemistry, 8(11), 2441-2451.

Sriram, M.A., & Kumta, P.N. (1998). The thio-sol-gel synthesis of titanium disulfide and niobium disulfide Part 1. - Materials chemistry. JOURNAL OF MATERIALS CHEMISTRY, 8(11), 2441-2451.Royal Society of Chemistry (RSC). doi: 10.1039/a802564i.

Sriram, M.A., & Kumta, P.N. (1998). The thio-sol-gel synthesis of titanium disulfide and niobium disulfide Part 2. - Morphology, defect structure and electrochemical characteristics of titanium disulfide. JOURNAL OF MATERIALS CHEMISTRY, 8(11), 2453-2463.Royal Society of Chemistry (RSC). doi: 10.1039/a802568a.

Sriram, M.A., McMichael, P.H., Waghray, A., Kumta, P., Misture, S., & Li-Wang, X. (1998). Chemical Synthesis of High Pressure Cubic Spinel ZnIn2S4 Powders. J. Mat. Sc., 33, 4333-4339.

Sriram, M.A., McMichael, P.H., Waghray, A., Kumta, P.N., Misture, S., & Wang, X.L. (1998). Chemical synthesis of the high-pressure cubic-spinel phase of ZnIn2S4. JOURNAL OF MATERIALS SCIENCE, 33(17), 4333-4339.Springer Science and Business Media LLC. doi: 10.1023/A:1004424629498.

Weil, K.S., & Kumta, P. (1998). Chemical Synthesis and Structural Characterization of Co3W3N. J. Alloys and Compounds, 265, 96-103.

Weil, K.S., & Kumta, P.N. (1998). Synthesis and structural investigation of a new ternary transition metal nitride, Co3W3N. JOURNAL OF ALLOYS AND COMPOUNDS, 265(1-2), 96-103.Elsevier BV. doi: 10.1016/S0925-8388(97)00283-1.

Kim, J.Y., Sriram, M.A., McMichael, P.H., Kumta, P., Phillips, B., & Risbud, S.H. (1997). New Precursors from Hydrazine and Aluminum Alkoxide Reaction for the Synthesis of Aluminum Nitride and Oxynitride Powders. J. Physical Chemistry, 101(24), 4689-4696.

Kim, J.Y., Sriram, M.A., McMichael, P.H., Kumta, P.N., Phillips, B.L., & Risbud, S.H. (1997). New molecular precursors from the reaction of hydrazine and aluminum alkoxide for the synthesis of powders in the Al-O-N system. JOURNAL OF PHYSICAL CHEMISTRY B, 101(24), 4689-4696.American Chemical Society (ACS). doi: 10.1021/jp970086r.

Sriram, M.A., Weil, K.S., & Kumta, P.N. (1997). Low-temperature chemical approaches for synthesizing sulfides and nitrides of reactive transition metals. APPLIED ORGANOMETALLIC CHEMISTRY, 11(2), 163-179.Wiley. doi: 10.1002/(sici)1099-0739(199702)11:2<163::aid-aoc564>3.0.co;2-s.

Weil, K.S., & Kumta, P. (1997). Synthesis and Structural Investigation of a new Ternary Nitride, Fe4W2N with a unique Eta-Carbide Structure. J. Solid State Chemistry, 134, 302-311.

Weil, K.S., & Kumta, P.N. (1997). Fe3W3N: a Rietveld refinement using x-ray powder diffraction. ACTA CRYSTALLOGRAPHICA SECTION C-CRYSTAL STRUCTURE COMMUNICATIONS, 53(12), 1745-1748. doi: 10.1107/S0108270197008305.

Weil, K.S., & Kumta, P.N. (1997). Chemical synthesis and structural investigation of a new ternary nitride, CrWN2. JOURNAL OF SOLID STATE CHEMISTRY, 128(2), 185-190.Elsevier BV. doi: 10.1006/jssc.1996.7180.

Weil, K.S., & Kumta, P.N. (1997). Synthesis of a new ternary nitride, Fe4W2N, with a unique eta-carbide structure. JOURNAL OF SOLID STATE CHEMISTRY, 134(2), 302-311.Elsevier BV. doi: 10.1006/jssc.1997.7560.

Weil, K.S., & Kumta, P.N. (1997). Fe3W3N: a Rietveld Refinement Using X-ray Powder Diffraction. Acta Crystallographica Section C Crystal Structure Communications, 53(12), 1745-1748.International Union of Crystallography (IUCr). doi: 10.1107/s0108270197008305.

Hsu, R., Kim, J.Y., Kumta, P., & Feist, T.P. (1996). Modified Oxide Sol Precipitation (MOSP) of Borophosphosilicate Glasses and Glass-Ceramics. Chem. Mater., 8, 107-113.

Hsu, R., Kim, J.Y., Kumta, P.N., & Feist, T.P. (1996). Modified oxide sol-precipitation (MOSP) approach for synthesizing borophosphosilicate glasses and glass-ceramics. CHEMISTRY OF MATERIALS, 8(1), 107-113.American Chemical Society (ACS). doi: 10.1021/cm950277b.

Kim, J.Y., Hsu, R., & Kumta, P. (1996). Effect of Nitrogen on the Structure and Dielectric Properties of Modified Oxide Sol-Gel Derived Borosilicate Glass and Glass-Ceramics. J. Am. Ceram. Soc., 79, 1473-1482.

Kim, J.Y., Hsu, R., & Kumta, P.N. (1996). Effect of incorporation of nitrogen on the structure and dielectric properties of modified oxide sol-precipitated borosilicate glasses and glass-ceramics. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 79(6), 1473-1482.Wiley. doi: 10.1111/j.1151-2916.1996.tb08752.x.

Kumta, P.N. (1996). Processing aspects of glass-nicalon fibre and interconnected porous aluminium nitride ceramic and glass composites. JOURNAL OF MATERIALS SCIENCE, 31(23), 6229-6240.Springer Science and Business Media LLC. doi: 10.1007/BF00354443.

Weil, K.S., & Kumta, P.N. (1996). Synthesis of ternary transition metal nitrides using chemically complexed precursors. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 38(1-2), 109-117.Elsevier BV. doi: 10.1016/0921-5107(95)01447-0.

HSU, R., KUMTA, P.N., & FEIST, T.P. (1995). MODIFIED OXIDE SOL-GEL (MOSG) SYNTHESIS OF BOROPHOSPHOSILICATE GLASSES AND GLASS-CERAMICS. JOURNAL OF MATERIALS SCIENCE, 30(12), 3123-3129.Springer Science and Business Media LLC. doi: 10.1007/BF01209226.

SRIRAM, M.A., & KUMTA, P.N. (1995). NEW MOLECULAR ROUTES FOR SYNTHESIZING TITANIUM DISULFIDE. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 33(2-3), 140-147.Elsevier BV. doi: 10.1016/0921-5107(94)01180-X.

SRIRAM, M.A., KUMTA, P.N., & KO, E.I. (1995). INTERACTION OF SOLVENT AND THE NATURE OF ADDUCTS ON THE CHEMICAL SYNTHESIS OF MOLYBDENUM NITRIDE POWDERS. CHEMISTRY OF MATERIALS, 7(5), 859-864.American Chemical Society (ACS). doi: 10.1021/cm00053a008.

SRIRAM, M.A., KUMTA, P.N., MATONEY, J.P., & KO, E.I. (1995). A LOW-TEMPERATURE CHEMICAL APPROACH USING HYDRAZINE TO SYNTHESIZE MO2N POWDERS. JOURNAL OF MATERIALS SCIENCE LETTERS, 14(12), 906-908.Springer Science and Business Media LLC. doi: 10.1007/BF00639322.

Kumta, P. (1994). Particle Size Determination: Grains. Encyclopedia of Advanced Materials, 3, 1913-1919.

Kumta, P. (1994). Particle Size Distribution: Powders. Encyclopedia of Advanced Materials, 3, 1919-1926.

Kumta, P., & Risbud, S.H. (1994). Rare Earth Chalcogenides-New Class of Emerging Optical Materials. J. Mat. Sc., 29, 1135-1158.

Kumta, P., Hackenberg, R.E., McMichael, P., & Johnson, W.C. (1994). Sol-Gel Synthesis of Cordierite, Aerogels, Xerogels and Thin Films. Mat. Lett., 20, 355-362.

KUMTA, P.N., & RISBUD, S.H. (1994). RARE-EARTH CHALCOGENIDES - AN EMERGING CLASS OF OPTICAL-MATERIALS. JOURNAL OF MATERIALS SCIENCE, 29(5), 1135-1158.Springer Science and Business Media LLC. doi: 10.1007/BF00975057.

KUMTA, P.N., HACKENBERG, R.E., MCMICHAEL, P., & JOHNSON, W.C. (1994). SOLUTION SOL-GEL SYNTHESIS AND PHASE EVOLUTION STUDIES OF CORDIERITE XEROGELS, AEROGELS AND THIN-FILMS. MATERIALS LETTERS, 20(5-6), 355-362.Elsevier BV. doi: 10.1016/0167-577X(94)90044-2.

KUMTA, P.N., MAH, T.I., JERO, P.D., & KERANS, R.J. (1994). PROCESSING OF 3D INTERCONNECTED POROUS ALUMINUM NITRIDE COMPOSITES FOR ELECTRONIC PACKAGING. MATERIALS LETTERS, 21(3-4), 329-333.Elsevier BV. doi: 10.1016/0167-577X(94)90199-6.

SRIRAM, M.A., & KUMTA, P.N. (1994). THIO SOL-GEL PROCESS FOR THE SYNTHESIS OF TITANIUM DISULFIDE. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 77(5), 1381-1384.Wiley. doi: 10.1111/j.1151-2916.1994.tb05422.x.

KUMTA, P.N., & RISBUD, S.H. (1993). NONAQUEOUS CHEMICAL SYNTHESIS OF TETRAGONAL (BETA-LA2S3) LANTHANUM SULFIDE POWDERS. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 18(3), 260-268.Elsevier BV. doi: 10.1016/0921-5107(93)90141-9.

KUMTA, P.N., & RISBUD, S.H. (1993). LOW-TEMPERATURE CHEMICAL ROUTES TO FORMATION AND IR PROPERTIES OF LANTHANUM SESQUISULFIDE (LA2S3) CERAMICS. JOURNAL OF MATERIALS RESEARCH, 8(6), 1394-1410.Springer Science and Business Media LLC. doi: 10.1557/JMR.1993.1394.

KUMTA, P.N., & SRIRAM, M.A. (1993). NOVEL LOW-TEMPERATURE SYNTHESIS OF GLASSES AND GLASS-CERAMICS IN THE B2O3-SIO2-P2O5 SYSTEM. JOURNAL OF MATERIALS SCIENCE, 28(4), 1097-1106.Springer Science and Business Media LLC. doi: 10.1007/BF00400898.

KUMTA, P.N., DRAVID, V.P., & RISBUD, S.H. (1993). STRUCTURAL CHARACTERIZATION OF CHEMICALLY SYNTHESIZED CUBIC LANTHANUM SULFIDE (GAMMA-LA2S3). PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 68(1), 67-84.Informa UK Limited. doi: 10.1080/13642819308215283.

Kumta, P., & Risbud, S.H. (1991). Novel Glasses in La2S3-GeS2 System. J. Mat. Res., 12, 2694-2700.

KUMTA, P.N., & RISBUD, S.H. (1991). CHEMICAL-PROCESSING OF RARE-EARTH CHALCOGENIDES. PROGRESS IN CRYSTAL GROWTH AND CHARACTERIZATION OF MATERIALS, 22(4), 321-383.Elsevier BV. doi: 10.1016/0960-8974(91)90021-4.

KUMTA, P.N., & RISBUD, S.H. (1991). MICROSTRUCTURE AND THERMAL-STABILITY OF AMORPHOUS MATERIALS IN THE GES2-LA2S3 SYSTEM. JOURNAL OF MATERIALS RESEARCH, 6(12), 2694-2700.Springer Science and Business Media LLC. doi: 10.1557/JMR.1991.2694.

KUMTA, P.N., & RISBUD, S.H. (1990). NOVEL GLASSES IN RARE-EARTH SULFIDE SYSTEMS. AMERICAN CERAMIC SOCIETY BULLETIN, 69(12), 1977-1984.

KUMTA, P.N., & RISBUD, S.H. (1989). LOW-TEMPERATURE SYNTHESIS OF CUBIC LANTHANUM SULFIDE (LA2S3) POWDERS. MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2(4), 281-286.Elsevier BV. doi: 10.1016/0921-5107(89)90005-6.

KUMTA, P.N., & RISBUD, S.H. (1989). CRITIQUE OF SINGLE OR MULTIPLE PHASE FORMATION IN RAPIDLY SOLIDIFIED GASB-INSB SOLID-SOLUTIONS. JOURNAL OF MATERIALS SCIENCE LETTERS, 8(9), 1071-1072.Springer Science and Business Media LLC. doi: 10.1007/BF01730490.

KUMTA, P.N., DEYMIER, P.A., & RISBUD, S.H. (1989). GLASS-FORMATION IN SIMPLE IONIC SYSTEMS VIA CONSTANT PRESSURE MOLECULAR-DYNAMICS. JOURNAL OF CHEMICAL PHYSICS, 90(12), 7384-7394.AIP Publishing. doi: 10.1063/1.456218.

KUMTA, P.N. (1988). USING POWDER CHARACTERIZATION IN THE DEVELOPMENT OF NEW MATERIALS. JOURNAL OF METALS, 40(8), 57.Springer Science and Business Media LLC. doi: 10.1007/BF03258130.

KUMTA, P.N., & RISBUD, S.H. (1988). RAPID SOLIDIFICATION PROCESSING AND CHARACTERIZATION OF SEMICONDUCTING INXGA1-SB ALLOYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 58(5), 513-528.Informa UK Limited. doi: 10.1080/13642818808208462.

KUMTA, P.N., DEYMIER, P.A., & RISBUD, S.H. (1988). IMPROVED RIGID ION MODEL OF MOLTEN ZINC-CHLORIDE. PHYSICA B, 153(1-3), 85-92.Elsevier BV. doi: 10.1016/0921-4526(88)90037-3.

KUMTA, P.N., PHULE, P.P., & RISBUD, S.H. (1987). LOW-TEMPERATURE WET-CHEMICAL SYNTHESIS OF AMORPHOUS INDIUM SULFIDE POWDERS. MATERIALS LETTERS, 5(10), 401-404.Elsevier BV. doi: 10.1016/0167-577X(87)90049-8.

Ghadge, S., Patel, P.P., Datta, M.K., Velikokhatnyi, O., Jampani, P., & Kumta, P. (2016). Highly active robust F doped transition metal oxide based solid solution electro-catalyst for acidic medium oxygen evolution reaction in PEM based water electrolysis. In Materials Engineering and Sciences Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 2, (pp. 771-772).

Ghadge, S., Patel, P.P., Datta, M.K., Velikokhatnyi, O., Jampani, P., & Kumta, P. (2016). Highly active robust F doped transition metal oxide based solid solution electro-catalyst for acidic medium oxygen evolution reaction in PEM based water electrolysis. In Nanomaterials for Applications in Energy and Biology 2016 - Topical Conference at the 2016 AIChE Annual Meeting, (pp. 66-68).

Damle, S., Pal, S., Maiti, S., & Kumta, P.N. (2015). 430203 understanding the configuration-mechanical stability relationships for Si-CNT heterostructured anodes for Li-ion battery: A computational study. In Nanomaterials for Energy Applications 2015 - Topical Conference at the 2015 AIChE Annual Meeting, (pp. 61-62).

Damle, S., Pal, S., Maiti, S., & Kumta, P.N. (2015). Understanding the configuration-mechanical stability relationships for Si-CNT heterostructured anodes for Li-Ion Battery: A computational study. In Engineering Sciences and Fundamentals 2015 - Core Programming Area at the 2015 AIChE Annual Meeting, 1, (pp. 450-451).

Damle, S., Pal, S., Maiti, S., & Kumta, P.N. (2015). Understanding the configuration-mechanical stability relationships for Si-CNT heterostructured anodes for li-ion battery: A computational study. In Materials Engineering and Sciences Division 2015 - Core Programming Area at the 2015 AIChE Annual Meeting, (pp. 322-323).

Ostrowski, N., Sharma, V., Roy, A., & Kumta, P.N. (2015). Exploration of amorphous and crystalline TRI-magnesium phosphates for bone cements. In Ceramic Transactions, 254, (pp. 33-46).

Patel, P.P., Datta, M.K., Velikokhatnyi, O., Jampani, P., & Kumta, P.N. (2015). 427592 nanostructured robust cobalt alloy based anode electro-catalysts with superior electrochemical activity for proton exchange membrane fuel cells. In Nanomaterials for Energy Applications 2015 - Topical Conference at the 2015 AIChE Annual Meeting, (pp. 120-121).

Patel, P.P., Datta, M.K., Velikokhatnyi, O., Jampani, P., & Kumta, P.N. (2015). Nanostructured robust cobalt alloy based anode electro-catalysts with superior electrochemical activity for proton exchange membrane fuel cells. In Materials Engineering and Sciences Division 2015 - Core Programming Area at the 2015 AIChE Annual Meeting, (pp. 542-544).

Patel, P.P., Datta, M.K., Velikokhatnyi, O., Jampani, P., & Kumta, P.N. (2015). Nanostructured robust cobalt alloy based anode electro-catalysts with superior electrochemical activity for proton exchange membrane fuel cells. In Nanoscale Science and Engineering Forum 2015 - Core Programming Area at the 2015 AIChE Annual Meeting, (pp. 263-265).

Patil, M., Ramanathan, M., Shanov, V., & Kumta, P.N. (2015). Carbon Nanotube-Based Impedimetric Biosensors for Bone Marker Detection. In Ceramic Transactions, 253, (pp. 187-193).John Wiley & Sons, Inc. doi: 10.1002/9781119190042.ch18.

Adarkwa, E., Desai, S., Ohodnicki, J.M., Roy, A., Lee, B., & Kumta, P.N. (2014). Amorphous calcium phosphate blended polymer coatings for biomedical implants. In IIE Annual Conference and Expo 2014, (pp. 132-138).

Barner, S., Richardson, T., Kumta, P.N., & Banerjee, I. (2014). Effect of substrate properties on the growth kinetics of encapsulated human embryonic stem cells. In Student Poster Sessions 2014 - Core Programming Area at the 2014 AIChE Annual Meeting, (pp. 196-197).

Kumta, P.N., Epur, R., Datta, M.K., Saha, P., Gattu, B., & Kuruba, R. (2014). Engineering nanoscale materials and systems for high-capacity lithium ion anodes: Progress to date. In AABC 2014 - Advanced Automotive Battery Confernce, LLIBTA Symposium Track A: Cell Materials and Chemistry and Track B: Battery Engineering- Large Lithium Ion Battery Technology and Application and ECCAP Symposium - Large EC Capacitor Technology and Application.

Patel, P., Datta, M.K., Hanumantha, P.J., & Kumta, P.N. (2014). High performance non noble metal containing catalyst for PEM fuel cell. In Nanomaterials for Energy Applications 2014 - Topical Conference at the 2014 AIChE Annual Meeting, (p. 85).

Perkins, J., Xu, Z., Roy, A., Kumta, P., Waterman, J., & Desai, S. (2014). Polymeric coatings for biodegradable implants. In AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, 2014-January, (pp. 47-50).

Pal, S., Chaya, A., Yoshizawa, S., Chou, D.T., Hong, D., Maiti, S., Kumta, P.N., & Sfeir, C. (2013). Finite Element Analysis of Magnesium Alloy Based Bone Fixation Devices. In ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation.American Society of Mechanical Engineers. doi: 10.1115/fmd2013-16189.

Richardson, T., Kumta, P.N., & Banerjee, I. (2013). Alginate encapsulation of human embryonic stem cells enhances its directed differentiation to pancreatic islet-like cells. In Food, Pharmaceutical and Bioengineering Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, (pp. 317-318).

Chou, D., Hong, D., Kuhn, H., & Kumta, P.N. (2012). 3D printing of biocompatible materials for medical implants and scaffolds. In Advances in Powder Metallurgy and Particulate Materials - 2012, Proceedings of the 2012 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2012, (pp. 31-36).

Kadakia, K.S., Datta, M.K., Velikokhatnyi, O., & Kumta, P.N. (2012). Novel transition metal oxide oxygen evolution electrocatalysts for hydrogen production via PEM based water electrolysis. 222nd ECS meeting.Honolulu, Hawaii.

Pal, S., Damle, S., Patel, S., Dutta, M.K., Kumta, P.N., & Maiti, S. (2012). Micromechanisms of Capacity Fade in Silicon Anode for Lithium-Ion Batteries. In ECS Transactions, 41(11), (pp. 87-99).The Electrochemical Society. doi: 10.1149/1.3687394.

Singh, V., Seehra, M.S., Manivannan, A., & Kumta, P.N. (2012). Magnetic characteristics of a new cubic defect spinel Li0.5Mg0.5MnO3. In JOURNAL OF APPLIED PHYSICS, 111(7), (p. 07E302).AIP Publishing. doi: 10.1063/1.3670504.

Pai, D.M., Liles, R.G., Lambeth, C., Kumta, P.N., Borovetz, H.S., Pixley, S.K., Roy, P., & Sankar, J. (2011). Bootstrapping a new graduate curriculum through an Engineering Research Center. In ASEE Annual Conference and Exposition, Conference Proceedings.

Pai, D.M., Liles, R.G., Lambeth, C., Kumta, P.N., Borovetz, H.S., Pixley, S.K., Roy, P., & Sankar, J. (2011). Bootstrapping a new graduate curriculum through an Engineering Research Center. In ASEE Annual Conference and Exposition, Conference Proceedings.

Smart, M.C., Manivannan, A., Kumta, P.N., & Narayan, S.R. (2011). ECS Transactions: Preface. In ECS Transactions, 35(32).

Atthipalli, G., Kumta, P.N., Wang, W., Epur, R., Jampani, P.H., Allen, B.L., Tang, Y., Star, A., & Gray, J.L. (2010). Growth of carbon nanotubes on copper substrates using a nickel thin film catalyst. In Materials Research Society Symposium Proceedings, 1204, (pp. 55-60).

Velikokhatnyi, O., & Kumta, P. (2010). Ab Initio Study of Doped Tin Niobates and Tantalates as Prospective Catalyst Supports for Water Electrolysis. In ECS Transactions, 28(26), (pp. 37-48).The Electrochemical Society. doi: 10.1149/1.3501094.

Li, J., Olton, D., Lee, D., Kumta, P.N., & Sfeir, C. (2009). Cell Derived Hierarchical Assembly of a Novel Phosphophoryn-Based Biomaterial. In CELLS TISSUES ORGANS, 189(1-4), (pp. 252-255).S. Karger AG.Switzerland. doi: 10.1159/000158571.

Velikokhatnyi, O.I., & Kumta, P.N. (2009). Exploring tin tantalates and niobates as prospective catalyst supports for water electrolysis. 217th Electrochemical Society Spring Meeting.Vancouver, British Columbia. doi: 10.1016/j.physb.2009.02.018.

Datta, M.K., & Kumta, P.N. (2008). Alloy Design for Long Term Cyclability of Si Based Anode Materials for Lithium Ion Batteries. In SAE International Journal of Materials and Manufacturing, 1(1), (pp. 285-290).SAE International. doi: 10.4271/2008-01-0686.

Yun, Y., Dong, Z., Yang, D., Shanov, V., Xu, Z., Sfeir, C., Doepke, A., & Schulz, M. (2008). Biodegradable Mg for Bone Implants: Corrosion and Osteoblast Culture Studies. In Volume 15: Processing and Engineering Applications of Novel Materials, 15, (pp. 125-129).ASMEDC. doi: 10.1115/imece2008-69224.

Olton, D., Lee, D.H., Sfeir, C., & Kumta, P.N. (2007). Novel Nanostructured Calcium Phosphate Based Delivery Systems for Non-Viral Gene Delivery. In ASME 2007 Summer Bioengineering Conference, (pp. 1001-1002).American Society of Mechanical Engineers. doi: 10.1115/sbc2007-176286.

Datta, M.K., Kim, J.Y., & Kumta, P.N. (2006). Novel sol-gel synthesis and characterization of high-surface-area Pt-Ru catalysts as anodes for direct methanol fuel cells. In Ceramic Transactions, 179, (pp. 165-172).American Ceramic Society.

Kim, I.S., Kumta, P.N., & Blomgren, G.E. (2005). Chemically derived nano-encapsulated tin-carbon composite anodes for Li-ion batteries. In Ceramic Transactions, 161, (pp. 131-140).American Ceramic Society.

Maranchi, J.P., Kumta, P.M., & Hepp, A.F. (2005). Amorphous silicon thin film anodes for lithium-ion batteries. In Ceramic Transactions, 161, (pp. 121-129).

Patel, P., Kim, I.S., & Kumta, P.N. (2005). Nanocomposites of silicon/titanium carbide synthesized using high-energy mechanical milling for use as anodes in lithium-ion batteries. In Materials Science and Engineering: B, 116(3), (pp. 347-352).Elsevier BV. doi: 10.1016/j.mseb.2004.05.046.

Datta, M.K., Kim, I.S., & Kumta, P.N. (2004). Si/C/PAN and Sn/C nanocomposite anodes for lithium ion batteries. In Collection of Technical Papers - 2nd International Energy Conversion Engineering Conference, 1, (pp. 331-337).

Kim, I.S., Blomgren, G.E., & Kumta, P.N. (2004). Chemically derived tin/carbon composite anodes for li-ion batteries. In Proceedings - Electrochemical Society, PV 2003-28, (pp. 42-51).

Maranchi, J.P., Kumta, P.M., & Hepp, A.F. (2004). Morphological changes in amorphous silicon thin film anodes during electrochemical cycling. In Collection of Technical Papers - 2nd International Energy Conversion Engineering Conference, 1, (pp. 338-343).

Velikokhatnyi, O.I., Chang, C.C., & Kumta, P.N. (2004). Ab-initio calculation of phase stability in NaMnO2. In Proceedings - Electrochemical Society, PV 2003-28, (pp. 183-191).

Weil, K.S., & Kumta, P.N. (2004). Use of complexed ammonia precursors in synthesizing layered nitride compounds. In Ceramic Transactions, 154, (pp. 3-14).

Bidic, S.M.S., Calvert, J.W., Marra, K., Kumta, P., Campbell, P., Mitchell, R., Wigginton, W., Hollinger, J.O., Weiss, L., & Mooney, M.P. (2003). Rabbit calvarial wound healing by means of seeded Caprotite((R)) scaffolds. In JOURNAL OF DENTAL RESEARCH, 82(2), (pp. 131-135). doi: 10.1177/154405910308200211.

Maranchi, J.P., Hepp, A.F., & Kumta, P.N. (2003). High capacity, reversible silicon thin-film anodes for lithium-ion batteries. 204th Meeting of the The Electrochemical Society.Orlando, Florida. doi: 10.1149/1.1596918.

Maranchi, J.P., Kim, I.S., Hepp, A.F., & Kumta, P.N. (2003). Nanostructured electrochemically active materials: Opportunities for aerospace power applications. In 1st International Energy Conversion Engineering Conference IECEC.

Weil, K.S., Kumta, P.N., & Grins, J. (2003). Exploration of Cation Substitution in the Layered Compound CrWN2. In Materials Research Society Symposium - Proceedings, 755, (pp. 283-288).

Boduch, K.A., Chapman, T., Marra, K., Petricca, S., & Kumta, P. (2002). Synthesis of novel polymeric/ceramic composites as potential bone substitutes. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 223, (p. D2).

Boduch, K.A., Chapman, T., Marra, K., Pettrkca, S., & Kumta, P. (2002). Synthesis of novel polymeric/ceramic composites as potential bone substitutes. American Chemical Society National Meeting.Orlando, FL.

Raffaelle, R.P., Gennett, T., Maranchi, J., Kumta, P., Hepp, A.F., Heben, M.J., Dillon, A.C., & Jones, K.C. (2002). Carbon nanotube anodes for lithium ion batteries. In Materials Research Society Symposium - Proceedings, 706, (pp. 343-349).

Landa, A.I., Chang, C.C., Kumta, P.N., Magyari-Köpe, B., Vitos, L., Ahuja, R., & Abrikosov, I.A. (2001). First principles simulations of phase stability in stoichiometric and doped LiMnO2. In Materials Research Society Symposium - Proceedings, 677, (pp. AA4.16.1-AA4.16.6).

Landa, A.I., Chang, C.C., Kumta, P.N., Magyari-Köpe, B., Vitos, L., Ahuja, R., & Abrikosov, I.A. (2001). First Principles Simulations of Phase Stability in Stoichiometric and Doped LiMnO2. Eleventh Conference on Computational Research on Materials.Morgantown, West Virginia. doi: 10.1557/proc-677-aa4.16.

Murthy, J.Y., Amon, C.H., Gabriel, K., Kumta, P., Yao, S.C., Boyalakuntla, D., Hsieh, C.C., Jain, A., Narumanchi, S.V.J., Rebello, K., & Wu, C.F. (2001). MEMS-based thermal management of electronics using spray impingement. In Advances in Electronic Packaging, 2, (pp. 733-744).

Raffaelle, R.P., Underwood, J., Maranchi, J., Kumta, P., Scheiman, D., Jenkins, P., Smith, M.A., Wilt, D.M., Button, R.M., Hepp, A.F., Khan, O.P., Harris, J., Maurer, W.F., & Clark, C.R. (2001). Integrated microelectronic power supply (IMPS). In Proceedings of the Intersociety Energy Conversion Engineering Conference, 1, (pp. 239-242).

Yao, S.C., Amon, C.H., Gabriel, K., Kumta, P., Murthy, J.Y., Wu, C.F., Hsieh, C.C., Boyalakuntla, D., Narumanchi, S.V.J., & Rebello, K. (2001). MEMS Enabled Micro Spray Cooling System for Thermal Control of Electronic Chips. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369(7), (pp. 181-192).

Marra, K.G., Campbell, P.G., Dimilla, P.A., Kumta, P.N., Mooney, M.P., Szem, J.W., & Weiss, L.E. (1999). Novel three dimensional biodegradable scaffolds for bone tissue engineering. In Materials Research Society Symposium - Proceedings, 550, (pp. 155-160).

Weil, K.S., Kumta, P.N., Harris, J.D., & Hepp, A.F. (1999). Synthesis of thin film battery components by the spray decomposition technique. Fall Meeting of the MRS.Boston.

Kim, J.Y., & Kumta, P.N. (1998). 3-D interconnected porous AlN composite: a viable substrate for electronic packaging. In National Aerospace and Electronics Conference, Proceedings of the IEEE, (pp. 656-665).

Kostov, S., Wang, Y., denBoer, M.L., Greenbaum, S., Chang, C.C., & Kumta, P.N. (1998). X-ray absorption and NMR studies of LiNiCoO2 cathodes prepared by a particulate sol-gel process. In Materials Research Society Symposium - Proceedings, 496, (pp. 427-434).

Weil, K.S., & Kumta, P.N. (1998). Spray deposition of transition metal nitride thin films using alcohol based precursor solutions. In Materials Research Society Symposium - Proceedings, 495, (pp. 227-232).

Weil, K.S., & Kumta, P.N. (1998). Structural characterization of a series of new ternary η-nitride compounds. In Materials Research Society Symposium - Proceedings, 495, (pp. 221-226).

Weil, K.S., & Kumta, P.N. (1996). Complexed precursor approach to the synthesis of ternary transition metal nitrides. In Materials Research Society Symposium - Proceedings, 410, (pp. 127-133).

Sriram, M.A., & Kumta, P.N. (1994). New chemical approaches to synthesize titanium disulfide. In Materials Research Society Symposium - Proceedings, 327, (pp. 15-22).

Kumta, P.N., & Risbud, S.H. (1990). Primary and secondary phase separation in GeS2-La2S3 glasses. In Proceedings of SPIE - The International Society for Optical Engineering, 1327, (pp. 10-21).

Research interests

Engineering natural polymers and...
Innovative Processing of...
Nanostructured Catalysts and...
Nanostructured materials; non-viral...
Novel Biodegradable Metals for...
Novel low temperature approaches to...
Novel low temperature...
Novel nano-structured materials for...
Novel Non-Oxide Sol-Gel Synthesis,...
Novel Synthesis and...