headshot of Thomas Piccone

Thomas Piccone

Assistant Professor
LinkedIn Profile Mechanical Engineering & Materials Science

overview

Full-time Non-Tenure Stream (NTS) faculty member teaching courses in Materials Science

about

Sc.D., Metallurgy, Massachusetts Institute of Technology, 1986 - 1990

S.M., Metallurgy, Massachusetts Institute of Technology, 1982 - 1984

S.B., Materials Science and Engineering, Massachusetts Institute of Technology, 1978 - 1982

Story, S.R., Piccone, T.J., Fruehan, R.J., & Potter, M. (2004). Inclusion analysis to predict casting behavior. Iron and Steel Technology, 1(9), 163-169.

PICCONE, T.J., & FLEMINGS, M.C. (1992). DISCUSSION OF SOLIDIFICATION OF HIGHLY UNDERCOOLED FE-P ALLOYS - REPLY. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 23(9), 2674-2675.Springer Nature. doi: 10.1007/BF02658073.

KATTAMIS, T.Z., & PICCONE, T.J. (1991). RHEOLOGY OF SEMISOLID AL-4.5-PERCENT CU-1.5-PERCENT MG ALLOY. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 131(2), 265-272.Elsevier. doi: 10.1016/0921-5093(91)90403-A.

SUZUKI, M., PICCONE, T.J., & FLEMINGS, M.C. (1991). MEASUREMENTS OF RAPID SOLIDIFICATION RATE IN HIGHLY UNDERCOOLED MELTS WITH A VIDEO SYSTEM. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 22(11), 2825-2828.Springer Nature. doi: 10.1007/BF02851378.

SUZUKI, M., PICCONE, T.J., FLEMINGS, M.C., & BRODY, H.D. (1991). SOLIDIFICATION OF HIGHLY UNDERCOOLED FE-P ALLOYS. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 22(11), 2761-2768.Springer Nature. doi: 10.1007/BF02851370.

WU, Y., PICCONE, T.J., SHIOHARA, Y., & FLEMINGS, M.C. (1988). DENDRITIC GROWTH OF UNDERCOOLED NICKEL-TIN .3. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 19(4), 1109-1119.Springer Nature. doi: 10.1007/BF02628395.

Harf, F., Piccone, T.J., Flemings, M.C., Wu, Y., Yuh Shiohara, Gardner, L.B., & Winsa, E.A. (1987). ALLOY UNDERCOOLING EXPERIMENT ON THE COLUMBIA STS 61-C SPACE SHUTTLE MISSION. In NASA Technical Memorandum.

Piccone, T.J., Wu, Y., Shiohara, Y., & Flemings, M.C. (1987). DENDRITIC GROWTH OF UNDERCOOLED NICKEL-TIN: PART II. Metallurgical transactions. A, Physical metallurgy and materials science, 18 A(5), 925-932.

Wu, Y., Piccone, T.J., Shiohara, Y., & Flemings, M.C. (1987). DENDRITIC GROWTH OF UNDERCOOLED NICKEL-TIN. Metallurgical transactions. A, Physical metallurgy and materials science, 18 A(5), 915-924.

BUTRYMOWICZ, D.B., PICCONE, T.J., MANNING, J.R., & NEWBURY, D.E. (1983). COLOR METALLOGRAPHY OF DIFFUSION-INDUCED GRAIN-BOUNDARY MIGRATION IN CU-ZN AND CU-AS ALLOYS. METALLOGRAPHY, 16(4), 349-360.Elsevier. doi: 10.1016/0026-0800(83)90025-3.

PICCONE, T.J., BUTRYMOWICZ, D.B., NEWBURY, D.E., MANNING, J.R., & CAHN, J.W. (1982). DIFFUSION-INDUCED GRAIN-BOUNDARY MIGRATION IN THE CU-ZN SYSTEM. SCRIPTA METALLURGICA, 16(7), 839-843.Elsevier. doi: 10.1016/0036-9748(82)90241-1.

Natarajan, T.T., Story, S.R., Piccone, T.J., & Van Ness, K.D. (2017). Peritectic range study using mold thermocouple data. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1645-1654).

Piccone, T.J., Natarajan, T.T., Story, S.R., Jones, B., & Hreso, D.M. (2016). Quantitative methods for evaluation of centerline segregation. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1573-1583).

Gupta, N., Natarajan, T.T., Piccone, T.J., & Ashley, D.E. (2014). Identification and reduction of unsteady bulging in continuous casting. In AISTech - Iron and Steel Technology Conference Proceedings, 3, (pp. 2931-2943).

Piccone, T.J., McClymonds, M., & Hashimoto, K.H. (2013). Effect of hydrogen on mold heat removal at a rounds caster. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1497-1508).

Semenak, J., Zahumensky, P., Piccone, T.J., & Natarajan, T.T. (2013). Study of elevated temperature mechanical properties of steel. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1483-1495).

Sinha, A.K., Piccone, T.J., & Miller, P.D. (2013). Mathematical Modeling of Draining of Dual-Strand Caster Tundish With Unequal Throughputs at United States Steel Corporation. In Volume 3: Gas Turbine Heat Transfer; Transport Phenomena in Materials Processing and Manufacturing; Heat Transfer in Electronic Equipment; Symposium in Honor of Professor Richard Goldstein; Symposium in Honor of Prof. Spalding; Symposium in Honor of Prof. Arthur E. Bergles, 3, (p. v003t21a007).ASME International. doi: 10.1115/ht2013-17768.

Piccone, T.J. (2010). Steel liquidus temperature estimation from thermodynamic calculations. In AISTech - Iron and Steel Technology Conference Proceedings, (pp. 1203-1209).

Piccone, T.J., & Smith, S.M. (2010). The effect of hydrogen on mold heat removal in continuous casting. In AISTech - Iron and Steel Technology Conference Proceedings, (pp. 127-134).

Piccone, T.J., Ostermann, J.L., Stoessel, L.B., & Natarajan, T.T. (2009). Scanning pyrometer study at granite city works no. 2 caster. In AISTech - Iron and Steel Technology Conference Proceedings, 1, (pp. 1111-1121).

Sohn, I., Piccone, T.J., Natarajan, T.T., & Schlichting, W.K. (2009). Initial study on the effect of mold copper thickness on sticker, flux entrapment and bleeder events at U. S. Steel. In AISTech - Iron and Steel Technology Conference Proceedings, 1, (pp. 1217-1224).

Piccone, T.J., Sohn, I., Natarajan, T.T., & Serrano, E.J. (2007). Observations on mold corner temperatures measured using thermocouples. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 13-24).

Sohn, I., Piccone, T.J., & Natarajan, T.T. (2007). Detection of mold events using thermocouple measurements. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 39-46).

Becker, J.J., Madden, M.A., Natarajan, T.T., Piccone, T.J., Serrano, E.J., Story, S.R., Ecklund-Baker, S.C., Nickerson, I.A., & Schlichting, W.K. (2005). Liquid/solid interactions during continuous casting of high-Al advanced high-strength steels. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 99-106).

Natarajan, T.T., Piccone, T.J., Powers, K.D., Snyder, C.C., Badri, A.B., & Cramb, A. (2004). Mold simulator: A tool to study initial solidification. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1013-1025).

Serrano, E.J., Piccone, T.J., & Khan, K.K. (2004). Model to predict the effect of composition on the high temperature ductility Of Steel. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1125-1136).

Sinha, A.K., Piccone, T.J., Daniel, S.S., & Alvarez, A.H. (2002). Intermix trials at the U.S. Steel Edgar Thomson works dual-strand caster. In Steelmaking Conference Proceedings, 85, (pp. 261-274).

SHIOHARA, Y., FLEMINGS, M.C., WU, Y.Z., & PICCONE, T.J. (1986). RAPID SOLIDIFICATION OF LEVITATION MELTED NI-SN ALLOY DROPLETS WITH HIGH UNDERCOOLING. In TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 26(4), (pp. B131-B134).

Wu, Y., Piccone, T.J., Shiohara, Y., & Flemings, M.C. (1984). STRUCTURE AND RECALESCENCE BEHAVIOR OF UNDERCOOLED NICKEL-TIN ALLOYS. In Materials Research Society Symposia Proceedings, 28, (pp. 37-42).

Butrymowicz, D.B., Cahn, J.W., Manning, J.R., Newbury, D.E., & Piccone, T.J. (1983). DIFFUSION-INDUCED GRAIN-BOUNDARY MIGRATION. In Advances in Ceramics, 6, (pp. 202-212).