Minking Chyu

PhD, Mechanical Engineering, Thermosciences, University of Minnesota, 1986

MS, Applied Mechanics, University of Cincinnati, 1977

BS, Nuclear Engineering, National Tsing Hua University, 1974

Yang, L., Dai, W., Rao, Y., & Chyu, M.K. (2021). A machine learning approach to quantify the film cooling superposition effect for effusion cooling structures. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 162, 106774.Elsevier. doi: 10.1016/j.ijthermalsci.2020.106774.

Yang, Z., Luo, X., Chen, W., & Chyu, M.K. (2021). Mitigation effects of Body-Centered Cubic Lattices on the heat transfer deterioration of supercritical CO₂. APPLIED THERMAL ENGINEERING, 183, 116085.Elsevier. doi: 10.1016/j.applthermaleng.2020.116085.

Gao, L., Wang, X., Yu, S.C.M., & Chyu, M.K. (2020). Development of the impulse and thrust for laminar starting jets with finite discharged volume. JOURNAL OF FLUID MECHANICS, 902.Cambridge University Press (CUP). doi: 10.1017/jfm.2020.570.

Luo, X., Yang, Z., Chen, W., & Chyu, M.K. (2020). Effect of lattice structures on heat transfer deterioration of supercritical CO₂ in rectangle channels. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 77(11), 931-950.Taylor & Francis. doi: 10.1080/10407782.2020.1746168.

Parbat, S., Min, Z., Yang, L., & Chyu, M. (2020). Experimental and Numerical Analysis of Additively Manufactured Inconel 718 Coupons With Lattice Structure. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 142(6).ASME International. doi: 10.1115/1.4046527.

Yang, Z., Luo, X., Chen, W., & Chyu, M.K. (2020). Effects of longitudinal vortex generators on the heat transfer deterioration of supercritical CO₂ in vertical tubes. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 152, 119478.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2020.119478.

Bai, W., Chen, W., Yang, L., & Chyu, M.K. (2019). Numerical investigation on heat transfer and pressure drop of pin-fin array under the influence of rib turbulators induced vortices. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 129, 735-745.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2018.10.022.

Bai, W., Liang, D., Chen, W., & Chyu, M.K. (2019). Investigation of ribs disturbed entrance effect of heat transfer and pressure drop in pin-fin array. APPLIED THERMAL ENGINEERING, 162, 114214.Elsevier. doi: 10.1016/j.applthermaleng.2019.114214.

Hu, K.S.Y., Chi, X., Shih, T.I.P., Chyu, M., & Crawford, M. (2019). Steady RANS of Flow and Heat Transfer in a Smooth and Pin-Finned U-Duct With a Trapezoidal Cross Section. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 141(6).ASME International. doi: 10.1115/1.4042332.

Min, Z., Huang, G., Parbat, S.N., Yang, L., & Chyu, M.K. (2019). Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 141(3).ASME International. doi: 10.1115/1.4042009.

Parbat, S.N., Yang, L., Min, Z., & Chyu, M.K. (2019). Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 141(6).ASME International. doi: 10.1115/1.4041821.

Yang, L., Dai, W., Rao, Y., & Chyu, M.K. (2019). Optimization of the hole distribution of an effusively cooled surface facing non-uniform incoming temperature using deep learning approaches. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 145, 118749.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2019.118749.

Yang, L., Min, Z., Yue, T., Rao, Y., & Chyu, M.K. (2019). High resolution cooling effectiveness reconstruction of transpiration cooling using convolution modeling method. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 133, 1134-1144.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2019.01.010.

Chen, W., Yang, Z., Yang, L., & Chyu, M.K. (2018). Numerical investigation of heat transfer and flow characteristics of supercritical CO₂ in U-duct. APPLIED THERMAL ENGINEERING, 144, 532-539.Elsevier. doi: 10.1016/j.applthermaleng.2018.06.074.

Huang, G., Min, Z., Yang, L., Jiang, P.X., & Chyu, M. (2018). Transpiration cooling for additive manufactured porous plates with partition walls. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 124, 1076-1087.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2018.03.110.

Min, Z., Parbat, S.N., Yang, L., Kang, B., & Chyu, M.K. (2018). Fabrication and Characterization of Additive Manufactured Nickel-Based Oxide Dispersion Strengthened Coating Layer for High-Temperature Application. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 140(6).ASME International. doi: 10.1115/1.4038351.

Yang, L., Chen, W., & Chyu, M.K. (2018). A convolution modeling method for pore plugging impact on transpiration cooling configurations perforated by straight holes. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 126, 1057-1066.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2018.06.068.

Yang, Z., Chen, W., & Chyu, M.K. (2018). Numerical study on the heat transfer enhancement of supercritical CO₂ in vertical ribbed tubes. APPLIED THERMAL ENGINEERING, 145, 705-715.Elsevier. doi: 10.1016/j.applthermaleng.2018.09.081.

Shen, C., Brackee, G., Song, X., Tomison, M.D., Finckbone, V., Mitchell, K.T., Tang, L., Chyu, M., Dunn, D.M., & Wang, J. (2017). Safety Evaluation of Green Tea Polyphenols Consumption in Middle‐aged Ovariectomized Rat Model. Journal of Food Science, 82(9), 2192-2205.Wiley. doi: 10.1111/1750-3841.13745.

Shen, C., Klein, A., Chin, K., Mo, H., Tsai, P., Yang, R., Chyu, M., & Ima‐Nirwana, S. (2017). Tocotrienols for bone health: a translational approach. Annals of the New York Academy of Sciences, 1401(1), 150-165.Wiley. doi: 10.1111/nyas.13449.

Siw, S.C., Miller, N., Alvin, M., & Chyu, M. (2017). Heat Transfer Performance of Internal Cooling Channel With Single-Row Jet Impingement Array by Varying Flow Rates. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 9(1), 011015.ASME International. doi: 10.1115/1.4034686.

Yang, L., Parbat, S.N., Min, Z., & Chyu, M.K. (2017). Effect of topology on hybrid-linked jet impingement. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 108, 671-679.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2016.12.072.

Barry, M., Ying, J., Durka, M.J., Clifford, C.E., Reddy, B.V.K., & Chyu, M.K. (2016). Numerical solution of radiation view factors within a thermoelectric device. ENERGY, 102, 427-435.Elsevier. doi: 10.1016/j.energy.2016.02.078.

Barry, M.M., Agbim, K.A., Rao, P., Clifford, C.E., Reddy, B.V.K., & Chyu, M.K. (2016). Geometric optimization of thermoelectric elements for maximum efficiency and power output. ENERGY, 112, 388-407.Elsevier. doi: 10.1016/j.energy.2016.05.048.

Brismee, J.M., Yang, S., Lambert, M.E., Chyu, M.C., Tsai, P., Zhang, Y., Han, J., Hudson, C., Chung, E., & Shen, C.L. (2016). Differences in musculoskeletal health due to gender in a rural multiethnic cohort: a Project FRONTIER study. BMC MUSCULOSKELETAL DISORDERS, 17(1), 181.Springer Nature. doi: 10.1186/s12891-016-1042-7.

DeFina, L.F., Leonard, D., Willis, B.L., Barlow, C.E., Finley, C.E., Jenkins, M.R., Pence, B.C., Zhang, Y., Chyu, M.C., Lewiecki, E.M., & Shen, C.L. (2016). High Cardiorespiratory Fitness Is Associated with Reduced Risk of Low Bone Density in Postmenopausal Women. Journal of Women's Health, 25(10), 1073-1080.Mary Ann Liebert. doi: 10.1089/jwh.2014.5170.

Haddas, R., Sawyer, S.F., Sizer, P.S., Brooks, T., Chyu, M.C., & James, C.R. (2016). Effects of Volitional Spine Stabilization and Lower Extremity Fatigue on Trunk Control During Landing in Individuals With Recurrent Low Back Pain. Journal of Orthopaedic and Sports Physical Therapy, 46(2), 71-78.Journal of Orthopaedic & Sports Physical Therapy (JOSPT). doi: 10.2519/jospt.2016.6048.

Yang, L., Min, Z., Sarwesh, P.N., & Chyu, M.K. (2016). Numerical investigation on hybrid-linked jet impingement heat transfer based on the response surface methodology. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 70(12), 1297-1312.Taylor & Francis. doi: 10.1080/10407782.2016.1243955.

Yang, L., Min, Z., Sarwesh, P.N., & Chyu, M.K. (2016). Numerical optimizations of hybrid-linked jet impingement heat transfer based on the genetic algorithm. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 70(11), 1179-1194.Taylor & Francis. doi: 10.1080/10407782.2016.1243946.

Yang, Q., Zhang, P., Cheng, L., Min, Z., Chyu, M., & To, A.C. (2016). Finite element modeling and validation of thermomechanical behavior of Ti-6Al-4V in directed energy deposition additive manufacturing. ADDITIVE MANUFACTURING, 12, 169-177.Elsevier. doi: 10.1016/j.addma.2016.06.012.

Barry, M.M., Agbim, K.A., & Chyu, M.K. (2015). Performance of a Thermoelectric Device with Integrated Heat Exchangers. JOURNAL OF ELECTRONIC MATERIALS, 44(6), 1394-1401.Springer Nature. doi: 10.1007/s11664-014-3380-2.

Barry, M.M., Jung, Y., Lee, J.K., Phuoc, T.X., & Chyu, M.K. (2015). Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluids. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 127, 338-346.Elsevier. doi: 10.1016/j.petrol.2015.01.012.

Barry, M.M., Shayan, M., Jankowitz, B.T., Chen, Y., Duan, X., Robertson, A.M., Chyu, M.K., & Chun, Y. (2015). Smart Guidewires for Smooth Navigation in Neurovascular Intervention. JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME, 9(1), 011011.ASME International. doi: 10.1115/1.4029558.

Chen, Y., Barry, M.M., Shayan, M., Jankowitz, B.T., Duan, X., Robertson, A.M., Chyu, M.K., & Chun, Y. (2015). Smart guidewires for smooth navigation in neurovascular intervention. In Farinholt, K.M., & Griffin, S.F. (Eds.). Proceedings of SPIE--the International Society for Optical Engineering, 9433(1), 94330y-94330y-10.SPIE, the international society for optics and photonics. doi: 10.1117/12.2084261.

Chyu, M.C., Austin, T., Calisir, F., Chanjaplammootil, S., Davis, M.J., Favela, J., Gan, H., Gefen, A., Haddas, R., Hahn-Goldberg, S., Hornero, R., Huang, Y.L., Jensen, O., Jiang, Z., Katsanis, J.S., Lee, J.A., Lewis, G., Lovell, N.H., Luebbers, H.T., Morales, G.G., Matis, T., Matthews, J.T., Mazur, L., Ng, E.Y.K., Oommen, K.J., Ormand, K., Rohde, T., Sanchez-Morillo, D., Garcia Sanz-Calcedo, J., Sawan, M., Shen, C.L., Shieh, J.S., Su, C.T., Sun, L., Sun, M., Sun, Y., Tewolde, S.N., Williams, E.A., Yan, C., Zhang, J., & Zhang, Y.T. (2015). Healthcare Engineering Defined: A White Paper. JOURNAL OF HEALTHCARE ENGINEERING, 6(4), 635-647.Wiley. doi: 10.1260/2040-2295.6.4.635.

Khan, T.S., Khan, M.S., Chyu, M.C., & Ayub, Z.H. (2015). Ammonia evaporation in a mixed configuration chevron plate heat exchanger with and without miscible oil. International Journal of Refrigeration, 51, 120-134.Elsevier. doi: 10.1016/j.ijrefrig.2014.12.002.

Li, F., Chyu, M.K., Wang, J., & Tang, B. (2015). Life grade recognition of rotating machinery based on Supervised Orthogonal Linear Local Tangent Space Alignment and Optimal Supervised Fuzzy C-Means Clustering. MEASUREMENT, 73, 384-400.Elsevier. doi: 10.1016/j.measurement.2015.05.025.

Li, F., Wang, J., Chyu, M.K., & Tang, B. (2015). Weak fault diagnosis of rotating machinery based on feature reduction with Supervised Orthogonal Local Fisher Discriminant Analysis. NEUROCOMPUTING, 168, 505-519.Elsevier. doi: 10.1016/j.neucom.2015.05.076.

Robert‐McComb, J.J., Chyu, M., Tacón, A., & Norman, R. (2015). The effects of tai chi on measures of stress and coping style. Focus on Alternative and Complementary Therapies, 20(2), 89-96.Wiley. doi: 10.1111/fct.12179.

Shen, C.L., Han, J., Wang, S., Chung, E., Chyu, M.C., & Cao, J.J. (2015). Green tea supplementation benefits body composition and improves bone properties in obese female rats fed with high-fat diet and caloric restricted diet. Nutrition Research, 35(12), 1095-1105.Elsevier. doi: 10.1016/j.nutres.2015.09.014.

Tewolde, S., Oommen, K., Lie, D.Y.C., Zhang, Y., & Chyu, M.C. (2015). Epileptic Seizure Detection and Prediction Based on Continuous Cerebral Blood Flow Monitoring – a Review. Journal of Healthcare Engineering, 6(2), 159-178.Wiley. doi: 10.1260/2040-2295.6.2.159.

Barry, M., Ding, B., Jung, Y., Reddy, B.V.K., Phuoc, T.X., & Chyu, M.K. (2014). Pulsed nanosecond laser ablation of gold in deionized water and aqueous chitosan solution. OPTICS AND LASERS IN ENGINEERING, 55, 59-68.Elsevier. doi: 10.1016/j.optlaseng.2013.10.019.

Khan, M.S., Khan, T.S., Chyu, M.C., & Ayub, Z.H. (2014). Evaporation heat transfer and pressure drop of ammonia in a mixed configuration chevron plate heat exchanger. International Journal of Refrigeration, 41, 92-102.Elsevier. doi: 10.1016/j.ijrefrig.2013.12.015.

Reddy, B.V., Barry, M., Li, J., & Chyu, M.K. (2014). Convective Heat Transfer and Contact Resistance Effects on Performance of Conventional and Composite Thermoelectric Devices. ASME J. Heat Transfer, 136(101401).

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2014). Thermoelectric-hydraulic performance of a multistage integrated thermoelectric power generator. ENERGY CONVERSION AND MANAGEMENT, 77, 458-468.Elsevier. doi: 10.1016/j.enconman.2013.09.040.

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2014). Convective Heat Transfer and Contact Resistances Effects on Performance of Conventional and Composite Thermoelectric Devices. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 136(10), 101401.ASME International. doi: 10.1115/1.4028021.

Shen, C.L., Chen, L., Wang, S., & Chyu, M.C. (2014). Effects of dietary fat levels and feeding durations on musculoskeletal health in female rats. Food & Function, 5(3), 598-604.Royal Society of Chemistry (RSC). doi: 10.1039/c3fo60334b.

Shen, C.L., Mo, H., Smith, B.J., Chen, C.H., Chen, L., Chyu, M.C., & Kwun, I.S. (2014). Green Tea and other Fruit Polyphenols Attenuate Deterioration of Bone Microarchitecture. In Polyphenols in Human Health and Disease. 1, (pp. 681-693).Elsevier. doi: 10.1016/b978-0-12-398456-2.00052-9.

Wang, Y., Chyu, M.K., & Wang, Q.M. (2014). Passive wireless surface acoustic wave CO₂ sensor with carbon nanotube nanocomposite as an interface layer. SENSORS AND ACTUATORS A-PHYSICAL, 220, 34-44.Elsevier. doi: 10.1016/j.sna.2014.09.011.

Chyu, M.K., & Siw, S.C. (2013). Recent Advances of Internal Cooling Techniques for Gas Turbine Airfoils. ASME Journal of Thermal Sciences and Engineering Application, 5(021008).

Chyu, M.K., & Siw, S.C. (2013). Recent Advances of Internal Cooling Techniques for Gas Turbine Airfoils. JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 5(2), 021008.ASME International. doi: 10.1115/1.4023829.

Chyu, M.K., Reddy, B.V.K., Barry, M., & Li, J. (2013). ENHANCEMENT OF THERMOELECTRIC DEVICE PERFORMANCE THROUGH INTEGRATED FLOW CHANNELS. Frontiers in Heat and Mass Transfer, 4(2).Tech Science Press. doi: 10.5098/hmt.v4.2.3001.

Kao, M.T., Tung, Y.H., Ferng, Y.M., Chieng, C.C., & Chyu, M.K. (2013). 3D measurements and numerical computations of heat transfer coefficients on spheres in an array. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 68, 110-118.Elsevier. doi: 10.1016/j.ijthermalsci.2013.01.014.

Reddy, B.V., Barry, M., Li, J., & Chyu, M.K. (2013). Enhancement of Thermoelectric Device Performance Through Integrated Flow Channels. Frontiers in Heat and Mass Transfer, 4(023001).

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2013). Thermoelectric Performance of Novel Composite and Integrated Devices Applied to Waste Heat Recovery. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(3), 031706.ASME International. doi: 10.1115/1.4007892.

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2013). Mathematical modeling and numerical characterization of composite thermoelectric devices. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 67, 53-63.Elsevier. doi: 10.1016/j.ijthermalsci.2012.11.004.

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2013). Comprehensive Numerical Modeling of Thermoelectric Devices Applied to Automotive Exhaust Gas Waste-Heat Recovery. Volume 1: Heat Transfer in Energy Systems; Thermophysical Properties; Theory and Fundamental Research in Heat Transfer, 1, v001t01a047.ASME International. doi: 10.1115/ht2013-17454.

Shen, C.L., & Chyu, M.C. (2013). Green Tea and Bone Health Promotion. In Tea in Health and Disease Prevention. (pp. 613-625).Elsevier. doi: 10.1016/b978-0-12-384937-3.00051-3.

Shen, C.L., Chyu, M.C., & Wang, J.S. (2013). Tea and bone health: steps forward in translational nutrition 1 , 2 , 3 , 4 , 5. American Journal of Clinical Nutrition, 98(6), s1694-s1699.Elsevier. doi: 10.3945/ajcn.113.058255.

Shen, C.L., Chyu, M.C., Cao, J.J., & Yeh, J.K. (2013). Green Tea Polyphenols Improve Bone Microarchitecture in High-Fat-Diet–Induced Obese Female Rats Through Suppressing Bone Formation and Erosion. Journal of Medicinal Food, 16(5), 421-427.Mary Ann Liebert. doi: 10.1089/jmf.2012.0199.

Shen, C.L., Kwun, I.S., Wang, S., Mo, H., Chen, L., Jenkins, M., Brackee, G., Chen, C.H., & Chyu, M.C. (2013). Functions and mechanisms of green tea catechins in regulating bone remodeling. Current Drug Targets, 14(13), 1619-1630.Bentham Science Publishers. doi: 10.2174/13894501113146660216.

Shen, C.L., Zhu, W., Gao, W., Wang, S., Chen, L., & Chyu, M.C. (2013). Energy-restricted diet benefits body composition but degrades bone integrity in middle-aged obese female rats. Nutrition Research, 33(8), 668-676.Elsevier. doi: 10.1016/j.nutres.2013.05.008.

Shih, T.I.P., Ramachandran, S.G., & Chyu, M.K. (2013). Time-accurate CFD conjugate analysis of transient measurements of the heat-transfer coefficient in a channel with pin fins. Propulsion and Power Research, 2(1), 10-19.Elsevier. doi: 10.1016/j.jppr.2013.01.003.

Wang, Y., Wang, A.X.Wang, Y., Chyu, M.K., & Wang, Q.M. (2013). Fabrication and characterization of carbon nanotube-polyimide composite based high temperature flexible thin film piezoresistive strain sensor. SENSORS AND ACTUATORS A-PHYSICAL, 199, 265-271.Elsevier. doi: 10.1016/j.sna.2013.05.023.

Chyu, M.K., Reddy, B.V.K., Barry, M., & Li, J. (2012). Enhanced heat transfer characteristics and performance of composite thermoelectric devices. WIT Transactions on Engineering Sciences, 1, 15-26.WITPRESS LTD. doi: 10.2495/ht120021.

Hur, T.B., Phuoc, T.X., Chyu, M.K., & Ramanov, V.N. (2012). Applications of Pulsed Laser Ablation for Enhanced Gold Nanofluids. J. Applied Physics, 112(063113).

Hur, T.B., Phuoc, T.X., Chyu, M.K., & Romanov, V.N. (2012). Applications of pulsed laser ablation for enhanced gold nanofluids. JOURNAL OF APPLIED PHYSICS, 112(6), 063113.AIP Publishing. doi: 10.1063/1.4752876.

Khan, T.S., Khan, M.S., Chyu, M.C., & Ayub, Z.H. (2012). Corrigendum to “Experimental investigation of heat transfer and pressure drop of ammonia in a 60° chevron plate heat exchanger” by Tariq S. Khan, Mohammad S. Khan, Ming-C. Chyu, Zahid H. Ayub of [Int. J. Refrigeration 35 (2) (2012) 343]. International Journal of Refrigeration, 35(6), 1800.Elsevier. doi: 10.1016/j.ijrefrig.2012.03.001.

Qian, G., Xue, K., Tang, L., Wang, F., Song, X., Chyu, M.C., Pence, B.C., Shen, C.L., & Wang, J.S. (2012). Mitigation of Oxidative Damage by Green Tea Polyphenols and Tai Chi Exercise in Postmenopausal Women with Osteopenia. In Cameron, D.W. (Ed.). PLOS ONE, 7(10), e48090.Public Library of Science (PLoS). doi: 10.1371/journal.pone.0048090.

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2012). A Fluid-Thermo-Electric Coupled Field Analysis of a Novel Integrated Thermoelectric Device. Energy Procedia, 14, 2088-2095.Elsevier. doi: 10.1016/j.egypro.2011.12.1212.

Reddy, B.V.K., Barry, M., Li, J., & Chyu, M.K. (2012). THREE-DIMENSIONAL MULTIPHYSICS COUPLED FIELD ANALYSIS OF AN INTEGRATED THERMOELECTRIC DEVICE. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 62(12), 933-947.Taylor & Francis. doi: 10.1080/10407782.2012.715988.

Shen, C.L., Cao, J.J., Dagda, R.Y., Chanjaplammootil, S., Lu, C., Chyu, M.C., Gao, W., Wang, J.S., & Yeh, J.K. (2012). Green tea polyphenols benefits body composition and improves bone quality in long-term high-fat diet–induced obese rats. Nutrition Research, 32(6), 448-457.Elsevier. doi: 10.1016/j.nutres.2012.05.001.

Shen, C.L., Chyu, M.C., Yeh, J.K., Zhang, Y., Pence, B.C., Felton, C.K., Brismee, J.M., Arjmandi, B.H., Doctolero, S., & Wang, J.S. (2012). Effect of green tea and Tai Chi on bone health in postmenopausal osteopenic women: a 6-month randomized placebo-controlled trial. OSTEOPOROSIS INTERNATIONAL, 23(5), 1541-1552.Springer Nature. doi: 10.1007/s00198-011-1731-x.

Shen, C.L., Samathanam, C., Graham, S., Dagda, R.Y., Chyu, M.C., & Dunn, D.M. (2012). Green Tea Polyphenols and 1-α-OH-Vitamin D3 Attenuate Chronic Inflammation-Induced Myocardial Fibrosis in Female Rats. Journal of Medicinal Food, 15(3), 269-277.Mary Ann Liebert. doi: 10.1089/jmf.2011.0163.

Shen, C.L., Smith, B.J., Lo, D.F., Chyu, M.C., Dunn, D.M., Chen, C.H., & Kwun, I.S. (2012). Dietary polyphenols and mechanisms of osteoarthritis. The Journal of Nutritional Biochemistry, 23(11), 1367-1377.Elsevier. doi: 10.1016/j.jnutbio.2012.04.001.

Shen, C.L., von Bergen, V., Chyu, M.C., Jenkins, M.R., Mo, H., Chen, C.H., & Kwun, I.S. (2012). Fruits and dietary phytochemicals in bone protection. Nutrition Research, 32(12), 897-910.Elsevier. doi: 10.1016/j.nutres.2012.09.018.

Son, Y.H., Lee, J.K., Soong, Y., Martello, D., & Chyu, M.K. (2012). Heterostructured zero valent iron-montmorillonite nanohybrid and their catalytic efficacy. APPLIED CLAY SCIENCE, 62-63, 21-26.Elsevier. doi: 10.1016/j.clay.2012.04.003.

Wang, Y., Li, Z., Qin, L., Chyu, M.K., & Wang, Q.M. (2012). Theoretical and Experimental Studies of a Surface Acoustic Wave Flow Sensor. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 59(3), 481-490.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/TUFFC.2012.2218.

Acharya, S., Arts, T., Bogard, D., Bunker, R., Camci, C., Chen, P.H., Chyu, M., & Dorignac, E. (2011). Preface: Gas Turbine Heat Transfer. Heat Transfer Research, 42(2), 99-100.Begell House. doi: 10.1615/heattransres.v42.i2.20.

Chen, S.P., Chyu, M.K., & Shih, T.I.P. (2011). Effects of upstream ramp on the performance of film cooling. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 50(6), 1085-1094.Elsevier. doi: 10.1016/j.ijthermalsci.2010.10.005.

Hur, T.B., Phuoc, T.X., Chyu, M.K., & Romanov, V. (2011). Evolution of rheological properties of the nanofluids composed of laponite particles and Mg-Fe layered double hydroxide nanosheets. POLYMER, 52(10), 2238-2243.Elsevier. doi: 10.1016/j.polymer.2011.03.022.

Ji, C., Zhang, F., Hou, D., Zhu, H., Wu, J., Chyu, M.C., Levitas, V.I., & Ma, Y. (2011). High pressure X-ray diffraction study of potassium azide. Journal of Physics and Chemistry of Solids, 72(6), 736-739.Elsevier. doi: 10.1016/j.jpcs.2011.03.005.

Jung, Y., Son, Y.H., Lee, J.K., Phuoc, T.X., Soong, Y., & Chyu, M.K. (2011). Rheological Behavior of Clay-Nanoparticle Hybrid-Added Bentonite Suspensions: Specific Role of Hybrid Additives on the Gelation of Clay-Based Fluids. ACS APPLIED MATERIALS & INTERFACES, 3(9), 3515-3522.American Chemical Society (ACS). doi: 10.1021/am200742b.

Park, J.S., Kim, K.M., Lee, D.H., Cho, H.H., & Chyu, M. (2011). Heat Transfer in Rotating Channel With Inclined Pin-Fins. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 133(2), 021003.ASME International. doi: 10.1115/1.4000553.

Shen, C.L., Cao, J.J., Dagda, R.Y., Tenner, T.E., Chyu, M.C., & Yeh, J.K. (2011). Supplementation with Green Tea Polyphenols Improves Bone Microstructure and Quality in Aged, Orchidectomized Rats. Calcified Tissue International, 88(6), 455-463.Springer Nature. doi: 10.1007/s00223-011-9477-1.

Shen, C.L., Yeh, J.K., Cao, J.J., Chyu, M.C., & Wang, J.S. (2011). Green tea and bone health: Evidence from laboratory studies. Pharmacological Research, 64(2), 155-161.Elsevier. doi: 10.1016/j.phrs.2011.03.012.

Shen, C.L., Yeh, J.K., Samathanam, C., Cao, J.J., Stoecker, B.J., Dagda, R.Y., Chyu, M.C., & Wang, J.S. (2011). Protective actions of green tea polyphenols and alfacalcidol on bone microstructure in female rats with chronic inflammation. The Journal of Nutritional Biochemistry, 22(7), 673-680.Elsevier. doi: 10.1016/j.jnutbio.2010.05.007.

Shen, C.L., Yeh, J.K., Samathanam, C., Cao, J.J., Stoecker, B.J., Dagda, R.Y., Chyu, M.C., Dunn, D.M., & Wang, J.S. (2011). Green tea polyphenols attenuate deterioration of bone microarchitecture in female rats with systemic chronic inflammation. OSTEOPOROSIS INTERNATIONAL, 22(1), 327-337.Springer Nature. doi: 10.1007/s00198-010-1209-2.

Chyu, M. (2010). Editorial: Special Issue on Critical Care Engineerings. JOURNAL OF HEALTHCARE ENGINEERING, 1(4), I-VI.Wiley. doi: 10.1260/2040-2295.1.4.i.

Chyu, M.C., James, C.R., Sawyer, S.F., Brismée, J.M., Xu, K.T., Poklikuha, G., Dunn, D.M., & Shen, C.L. (2010). Effects of tai chi exercise on posturography, gait, physical function and quality of life in postmenopausal women with osteopaenia: a randomized clinical study. Clinical Rehabilitation, 24(12), 1080-1090.SAGE Publications. doi: 10.1177/0269215510375902.

Chyu, M.K. (2010). Recent Advances in Turbine Heat Transfer: With a View of Transition to Coal Gas Based Systems. 2010 14th International Heat Transfer Conference, Volume 8, 8(031006), 723-733.ASME International. doi: 10.1115/ihtc14-23414.

Chyu, M.K., & Alvin, M.A. (2010). Turbine Airfoil Aerothermal Characteristics in Future Coal Gas-Based Power Generation Systems. HEAT TRANSFER RESEARCH, 41(7), 737-752.Begell House. doi: 10.1615/HeatTransRes.v41.i7.40.

Hur, T.B., Phuoc, T.X., & Chyu, M.K. (2010). New approach to the synthesis of layered double hydroxides and associated ultrathin nanosheets in de-ionized water by laser ablation. JOURNAL OF APPLIED PHYSICS, 108(11), 114312.AIP Publishing. doi: 10.1063/1.3518510.

Imam, S.T., Ekwaro-Osire, S., & Chyu, M.C. (2010). Application of probability theory to analyze impact of disease on human life expectancy. Journal of Integrated Design and Process Science, 14(3), 25-35.

Karaivanov, V.G., Slaughter, W.S., Siw, S., Chyu, M.K., & Alvin, M.A. (2010). Compressive Creep Testing of Thermal Barrier Coated Nickel-Based Superalloys. Volume 1: Aircraft Engine; Ceramics; Coal, Biomass and Alternative Fuels; Education; Electric Power; Manufacturing Materials and Metallurgy, 1(Art. #091301), 471-482.ASME International. doi: 10.1115/gt2010-23421.

Khan, T.S., Khan, M.S., Chyu, M.C., & Ayub, Z.H. (2010). Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations. Applied Thermal Engineering, 30(8-9), 1058-1065.Elsevier. doi: 10.1016/j.applthermaleng.2010.01.021.

Shen, C.L., Chyu, M.C., Pence, B.C., Yeh, J.K., Zhang, Y., Felton, C.K., Doctolero, S., & Wang, J.S. (2010). Green tea polyphenols supplementation and Tai Chi exercise for postmenopausal osteopenic women: safety and quality of life report. BMC Complementary Medicine and Therapies, 10(1), 76.Springer Nature. doi: 10.1186/1472-6882-10-76.

Siw, S.C., Chyu, M.K., Shih, T.I.P., & Alvin, M.A. (2010). Effects of Pin Detached Space on Heat Transfer and From Pin Fin Arrays. ASME Trans. J. Heat Transfer, 134(081902), 491-500.ASME International. doi: 10.1115/gt2010-23227.

Son, Y.H., Lee, J.K., Soong, Y., Martello, D., & Chyu, M. (2010). Structure-Property Correlation in Iron Oxide Nanoparticle-Clay Hybrid Materials. CHEMISTRY OF MATERIALS, 22(7), 2226-2232.American Chemical Society (ACS). doi: 10.1021/cm9024843.

Son, Y.H., Lee, J.K., Soong, Y., Martello, D., & Chyu, M. (2010). Enhanced magnetic response of fluids using self-assembled petal-like iron oxide particles. APPLIED PHYSICS LETTERS, 96(12), 121905.AIP Publishing. doi: 10.1063/1.3371713.

Venerus, D.C., Buongiorno, J., Christianson, R., Townsend, J., Bang, I.C., Chen, G., Chung, S.J., Chyu, M., Chen, H., Ding, Y., Dubois, F., Dzido, G., Funfschilling, D., Galand, Q., Gao, J., Hong, H., Horton, M., Hu, L.W., Iorio, C.S., Jarzebski, A.B., Jiang, Y., Kabelac, S., Kedzierski, M.A., Kim, C., Kim, J.H., Kim, S., McKrell, T., Ni, R., Philip, J., Prabhat, N., Song, P., Van Vaerenbergh, S., Wen, D., Witharana, S., Zhao, X.Z., & Zhou, S.Q. (2010). VISCOSITY MEASUREMENTS ON COLLOIDAL DISPERSIONS (NANOFLUIDS) FOR HEAT TRANSFER APPLICATIONS. APPLIED RHEOLOGY, 20(4), 44582. doi: 10.3933/ApplRheol-20-44582.

Yang, J., Huang, J., Chyu, M.K., Wang, Q.M., Xiong, D., & Zhu, Z. (2010). Degradation of Poly(butylene terephthalate) in Different Supercritical Alcohol Solvents. JOURNAL OF APPLIED POLYMER SCIENCE, 116(4), 2269-2274.Wiley. doi: 10.1002/app.31649.

Buongiorno, J., & Chyu, M.K. (2009). A Benchmark Study on the Thermal Conductivity of Nanofluids. J. Applied Physics, 106(094312).

Buongiorno, J., Venerus, D.C., Prabhat, N., McKrell, T., Townsend, J., Christianson, R., Tolmachev, Y.V., Keblinski, P., Hu, L.W., Alvarado, J.L., Bang, I.C., Bishnoi, S.W., Bonetti, M., Botz, F., Cecere, A., Chang, Y., Chen, G., Chen, H., Chung, S.J., Chyu, M.K., Das, S.K., Di Paola, R., Ding, Y., Dubois, F., Dzido, G., Eapen, J., Escher, W., Funfschilling, D., Galand, Q., Gao, J., Gharagozloo, P.E., Goodson, K.E., Gutierrez, J.G., Hong, H., Horton, M., Hwang, K.S., Iorio, C.S., Jang, S.P., Jarzebski, A.B., Jiang, Y., Jin, L., Kabelac, S., Kamath, A., Kedzierski, M.A., Kieng, L.G., Kim, C., Kim, J.H., Kim, S., Lee, S.H., Leong, K.C., Manna, I., Michel, B., Ni, R., Patel, H.E., Philip, J., Poulikakos, D., Reynaud, C., Savino, R., Singh, P.K., Song, P., Sundararajan, T., Timofeeva, E., Tritcak, T., Turanov, A.N., Van Vaerenbergh, S., Wen, D., Witharana, S., Yang, C., Yeh, W.H., Zhao, X.Z., & Zhou, S.Q. (2009). A benchmark study on the thermal conductivity of nanofluids. JOURNAL OF APPLIED PHYSICS, 106(9), 094312.AIP Publishing. doi: 10.1063/1.3245330.

Chung, S.J., Leonard, J.P., Nettleship, I., Lee, J.K., Soong, Y., Martello, D.V., & Chyu, M.K. (2009). Characterization of ZnO Nanoparticle Suspension in Water: Effective Ultrasonic Dispersion. Powder Technology, 194, 75-80.

Chung, S.J., Leonard, J.P., Nettleship, I., Lee, J.K., Soong, Y., Martello, D.V., & Chyu, M.K. (2009). Characterization of ZnO nanoparticle suspension in water: Effectiveness of ultrasonic dispersion. POWDER TECHNOLOGY, 194(1-2), 75-80.Elsevier. doi: 10.1016/j.powtec.2009.03.025.

Chyu, M.C., Zheng, J., & Ayub, Z. (2009). Bundle effect of ammonia/lubricant mixture boiling on a horizontal bundle with enhanced tubing and inlet quality. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 32(8), 1876-1885.Elsevier. doi: 10.1016/j.ijrefrig.2009.07.013.

Chyu, M.K., Mazzotta, D.W., Siw, S.C., Karaivanov, V.G., Slaughter, W.S., & Alvin, M.A. (2009). Aerothermal Challenges in Syngas, Hydrogen-Fired, and Oxyfuel Turbines—Part I: Gas-Side Heat Transfer. Journal of Thermal Science and Engineering Applications, 1(1), 011002.ASME International. doi: 10.1115/1.3159479.

Chyu, M.K., Siw, S., Karaivanov, V., & Alvin, M.A. (2009). Aerothermal Challenges in Syngas, Hydrogen-Fired and Oxy-fuel Turbines: Part II - Effects of Internal Heat Transfer. J. Thermal Science and Engineering Applications, ASME, 1(011003).

Chyu, M.K., Siw, S., Mazzotta, D., Karaivanov, V., & Alvin, M.A. (2009). Aerothermal Challenges in Syngas, Hydrogen-Fired and Oxy-fuel Turbines: Part I - Gas Side Heat Transfer. J. Thermal Science and Engineering Applications, ASME, 1(011002).

Chyu, M.K., Siw, S.C., Karaivanov, V.G., Slaughter, W.S., & Alvin, M.A. (2009). Aerothermal Challenges in Syngas, Hydrogen-Fired, and Oxyfuel Turbines—Part II: Effects of Internal Heat Transfer. Journal of Thermal Science and Engineering Applications, 1(1), 011003.ASME International. doi: 10.1115/1.3159480.

Huang, J., Yang, J., Chyu, M.K., Wang, Q., & Zhu, Z. (2009). Continuous-distribution kinetics for degradation of polybutylene terephthalate (PBT) in supercritical methanol. POLYMER DEGRADATION AND STABILITY, 94(12), 2142-2148.Elsevier. doi: 10.1016/j.polymdegradstab.2009.09.011.

Hur, T.B., Phuoc, T.X., & Chyu, M.K. (2009). Synthesis of Mg-Al and Zn-Al-layered double hydroxide nanocrystals using laser ablation in water. OPTICS AND LASERS IN ENGINEERING, 47(6), 695-700.Elsevier. doi: 10.1016/j.optlaseng.2008.11.006.

Ji, C., Ma, Y., Chyu, M.C., Knudson, R., & Zhu, H. (2009). X-ray diffraction study of aluminum carbide powder to 50 GPa. Journal of Applied Physics, 106(8), 083511.AIP Publishing. doi: 10.1063/1.3246808.

Khan, T.S., Khan, M.S., Chyu, M.C., Ayub, Z.H., & Chattha, J.A. (2009). Review of Heat Transfer and Pressure Drop Correlations for Evaporation of Fluid Flow in Plate Heat Exchangers (RP-1352). Science and Technology for the Built Environment, 15(2), 169-188.Taylor & Francis. doi: 10.1080/10789669.2009.10390832.

Phuoc, T.X., Howard, B.H., & Chyu, M.K. (2009). Synthesis and rheological properties of cation-exchanged Laponite suspensions. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 351(1-3), 71-77.Elsevier. doi: 10.1016/j.colsurfa.2009.09.039.

Shen, C.L., Chyu, M.C., Yeh, J.K., Felton, C.K., Xu, K.T., Pence, B.C., & Wang, J.S. (2009). Green tea polyphenols and Tai Chi for bone health: Designing a placebo-controlled randomized trial. BMC Musculoskeletal Disorders, 10(1), 110.Springer Nature. doi: 10.1186/1471-2474-10-110.

Shen, C.L., Yeh, J.K., Stoecker, B.J., Chyu, M.C., & Wang, J.S. (2009). Green tea polyphenols mitigate deterioration of bone microarchitecture in middle-aged female rats. Bone, 44(4), 684-690.Elsevier. doi: 10.1016/j.bone.2008.11.018.

Lee, I.C., Chen, P.H., & Chyu, M.K. (2008). An experimental investigation of jet flows through a row of forward expanded holes into a mainstream over a concave surface. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 32(5), 1068-1080.Elsevier. doi: 10.1016/j.expthermflusci.2007.12.002.

Leonard, J.P., Chung, S.J., Nettleship, I., Soong, Y., Martello, D.V., & Chyu, M.K. (2008). Stability of Zinc Oxide Nanofluids Prepared with Aggregated Nanocrystalline Powders. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 8(12), 6361-6366.American Scientific Publishers. doi: 10.1166/jnn.2008.356.

Leonard, J.P., Chung, S.J., Nettleship, I., Soong, Y., Phuoc, T.X., Martello, D., & Chyu, M.K. (2008). Stability of Zinc Oxide Nanofluids Prepared with Aggregated Nanocrystalline Powders. J. Nanoscience and Nanotechnology, 8, 1-8.

Phuoc, T.X., Howard, B.H., Martello, D.V., Soong, Y., & Chyu, M.K. (2008). Synthesis of Mg(OH)₂, MgO, and Mg nanoparticles using laser ablation of magnesium in water and solvents. OPTICS AND LASERS IN ENGINEERING, 46(11), 829-834.Elsevier. doi: 10.1016/j.optlaseng.2008.05.018.

Shen, C.L., James, C.R., Chyu, M.C., Bixby, W.R., Brismée, J.M., Zumwalt, M.A., & Poklikuha, G. (2008). Effects of Tai Chi on Gait Kinematics, Physical Function, and Pain in Elderly with Knee Osteoarthritis — A Pilot Study. The American Journal of Chinese Medicine, 36(02), 219-232.World Scientific Publishing. doi: 10.1142/s0192415x08005734.

Zheng, J., Chyu, M.C., & Ayub, Z. (2008). Boiling of ammonia/lubricant mixture on a horizontal enhanced tube in a flooded evaporator with inlet vapor quality. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 31(4), 564-572.Elsevier. doi: 10.1016/j.ijrefrig.2007.06.016.

Brismée, J.M., Paige, R.L., Chyu, M.C., Boatright, J.D., Hagar, J.M., McCaleb, J.A., Quintela, M.M., Feng, D., Xu, K.T., & Shen, C.L. (2007). Group and home-based tai chi in elderly subjects with knee osteoarthritis: a randomized controlled trial. Clinical Rehabilitation, 21(2), 99-111.SAGE Publications. doi: 10.1177/0269215506070505.

Li, P.W., Schaefer, L.A., & Chyu, M.K. (2007). Three-Dimensional Model for the Conjugate Heat and Gas Species Transport in a Planar Type Solid Oxide Fuel Cell. International Journal of Transport Phenomena, 9(1), 1-18.

Phuoc, T.X., Soong, Y., & Chyu, M.K. (2007). Synthesis of Ag-deionized water nanofluids using multi-beam laser ablation in liquids. OPTICS AND LASERS IN ENGINEERING, 45(12), 1099-1106.Elsevier. doi: 10.1016/j.optlaseng.2007.06.005.

Phuoc, T.X., Soong, Y., Leonard, J.P., Nettleship, I., & Chyu, M.K. (2007). Synthesis of Ag-Deionized Water Nanofluids using Multi-Beam Laser Ablation in Liquids. J. Optics and Laser in Engineering, 45, 1009-1106.

Shen, C.L., Williams, J.S., Chyu, M.C., Paige, R.L., Stephens, A.L., Chauncey, K.B., Prabhu, F.R., Ferris, L.T., & Yeh, J.K. (2007). Comparison of the Effects of Tai Chi and Resistance Training on Bone Metabolism in the Elderly: A Feasibility Study. The American Journal of Chinese Medicine, 35(03), 369-381.World Scientific Publishing. doi: 10.1142/s0192415x07004898.

Aksoy, R., Ma, Y., Selvi, E., Chyu, M.C., Ertas, A., & White, A. (2006). X-ray diffraction study of molybdenum disulfide to 38.8GPa. Journal of Physics and Chemistry of Solids, 67(9-10), 1914-1917.Elsevier. doi: 10.1016/j.jpcs.2006.05.058.

Ayub, Z.H., Chyu, M.C., & Ayub, A.H. (2006). Case study: Limited charge shell and tube ammonia spray evaporator with enhanced tubes. Applied Thermal Engineering, 26(11-12), 1334-1338.Elsevier. doi: 10.1016/j.applthermaleng.2005.11.015.

Cunha, F.J., & Chyu, M.K. (2006). Trailing-edge cooling for gas turbines. JOURNAL OF PROPULSION AND POWER, 22(2), 286-300.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/1.20898.

Cunha, F.J., Dahmer, M.T., & Chyu, M.K. (2006). Thermal-mechanical life prediction system for anisotropic turbine components. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 128(2), 240-250.ASME International. doi: 10.1115/1.2137740.

Cunha, F.J., Dahmer, M.T., & Chyu, M.K. (2006). Analysis of Airfoil Trailing Edge Heat Transfer and Its Significance in Thermal-Mechanical Design and Durability. ASME J. Turbomachinery, 128(4), 738-746.

Li, P.W., Chen, S.P., & Chyu, M.K. (2006). To achieve the best performance through optimization of gas delivery and current collection in solid oxide fuel cells. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 3(2), 188-194.ASME International. doi: 10.1115/1.2174068.

Shih, T.I.P., & Chyu, M.K. (2006). Introduction: Turbine science and technology. JOURNAL OF PROPULSION AND POWER, 22(2), 225.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/1.23459.

Uysal, U., Li, P.W., Chyu, M.K., & Cunha, F.J. (2006). Heat transfer on internal surfaces of a duct subjected to impingement of a jet array with varying jet hole-size and spacing. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 128(1), 158-165.ASME International. doi: 10.1115/1.2101859.

Zheng, J.X., Jin, G.P., Chyu, M.C., & Ayub, Z.H. (2006). Boiling of ammonia/lubricant mixture on a horizontal tube in a flooded evaporator with inlet vapor quality. Experimental Thermal and Fluid Science, 30(3), 223-231.Elsevier. doi: 10.1016/j.expthermflusci.2005.06.001.

Chen, Z., Wu, N.Q., Shan, Z.W., Zhao, M.H., Li, S.X., Jiang, C.B., Chyu, M.K., & Mao, S.X. (2005). Effect of N₂ flow rate on morphology and structure of ZnO nanocrystals synthesized via vapor deposition. SCRIPTA MATERIALIA, 52(1), 63-67.Elsevier. doi: 10.1016/j.scriptamat.2004.08.024.

Divo, E., Kassab, A.J., Kapat, J.S., & Chyu, M.K. (2005). Retrieval of multidimensional heat transfer coefficient distributions using an inverse BEM-based regularized algorithm: numerical and experimental results. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, 29(2), 150-160.Elsevier. doi: 10.1016/j.enganabound.2004.08.006.

Li, P.W., & Chyu, M.K. (2005). Electrochemical and transport phenomena in solid oxide fuel cells. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 127(12), 1344-1362.ASME International. doi: 10.1115/1.2098828.

Li, P.W., & Chyu, M.K. (2005). Numerical simulation and performance optimization of solid oxide fuel cells. Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao, 26(3), 221-231.

Li, P.W., Chen, S.P., & Chyu, M.K. (2005). Novel gas distributors and optimization for high power density in fuel cells. JOURNAL OF POWER SOURCES, 140(2), 311-318.Elsevier. doi: 10.1016/j.jpowsour.2004.08.031.

Wu, N., Chen, Z., Xu, J., Chyu, M., & Mao, S.X. (2005). Impedance-metric Pt/YSZ/Au-Ga2O3 sensor for CO detection at high temperature. Sensors and Actuators B, 110, 48-53.

Wu, N., Zhao, M., Zheng, J., Jiang, C., Myers, B., Li, S., Chyu, M.K., & Mao, S.X. (2005). Porous CuO-ZnO Nanocomposite for Sensing Electrode of High-Temperature CO Solid-State Electrochemical Sensor. Nanotechnology, 16, 28782881.

Wu, N.Q., Chen, Z., Xu, J.H., Chyu, M., & Mao, S.X. (2005). Impedance-metric Pt/YSZ/Au-Ga₂O₃ sensor for CO detection at high temperature. SENSORS AND ACTUATORS B-CHEMICAL, 110(1), 49-53.Elsevier. doi: 10.1016/j.snb.2005.01.012.

Wu, N.Q., Zhao, M.H., Zheng, J.G., Jiang, C.B., Myers, B., Li, S.X., Chyu, M., & Mao, S.X. (2005). Porous CuO-ZnO nanocomposite for sensing electrode of high-temperature CO solid-state electrochemical sensor. NANOTECHNOLOGY, 16(12), 2878-2881.IOP Publishing. doi: 10.1088/0957-4484/16/12/024.

Li, P.W., Schaefer, L., & Chyu, M.K. (2004). A numerical model coupling the heat and gas species' transport processes in a tubular SOFC. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 126(2), 219-229.ASME International. doi: 10.1115/1.1667528.

Wu, N.Q., Ogawa, K., Chyu, M., & Mao, S.X. (2004). Failure detection of thermal barrier coatings using impedance spectroscopy. THIN SOLID FILMS, 457(2), 301-306.Elsevier. doi: 10.1016/j.tsf.2003.10.009.

Li, P.W., & Chyu, M.K. (2003). Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack. JOURNAL OF POWER SOURCES, 124(2), 487-498.Elsevier. doi: 10.1016/j.jpowsour.2003.06.001.

Li, P.W., Schaefer, L., Wang, Q.M., Zhang, T., & Chyu, M.K. (2003). Multi-gas transportation and electrochemical performance of a polymer electrolyte fuel cell with complex flow channels. JOURNAL OF POWER SOURCES, 115(1), 90-100.Elsevier. doi: 10.1016/S0378-7753(02)00723-1.

Li, P.W., Zhang, T., Wang, Q.M., Schaefer, L., & Chyu, M.K. (2003). The performance of PEM fuel cells fed with oxygen through the free-convection mode. JOURNAL OF POWER SOURCES, 114(1), 63-69.Elsevier. doi: 10.1016/S0378-7753(02)00535-9.

Yu, Y., Yen, C.H., Shih, T.I.P., Chyu, M.K., & Gogineni, S. (2002). Film cooling effectiveness and heat transfer coefficient distributions around diffusion shaped holes. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 124(5), 820-827.ASME International. doi: 10.1115/1.1418367.

Chen, P.H., Peng, H.Y., Hsieh, C.M., & Chyu, M.K. (2001). The characteristic behavior of TMAH water solution for anisotropic etching on both silicon substrate and SiO₂ layer. SENSORS AND ACTUATORS A-PHYSICAL, 93(2), 132-137.Elsevier. doi: 10.1016/S0924-4247(01)00639-2.

Cheng, Y., Shew, B.Y., Chyu, M.K., & Chen, P.H. (2001). Ultra-deep LIGA process and its applications. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 467(PART II), 1192-1197.Elsevier. doi: 10.1016/S0168-9002(01)00606-4.

Chyu, M.K. (2001). Heat transfer near turbine nozzle endwall. HEAT TRANSFER IN GAS TURBINE SYSTEMS, 934(1), 27-36.Wiley. doi: 10.1111/j.1749-6632.2001.tb05840.x.

Chyu, M.K., Ojo, O.B., Yen, C.H., & Nordlund, R.S. (2001). Heat Transfer of a Chordwise-Oriented Internal Cooling Passage Around a Turbine Airfoil. ASME HTD, 24323, 1-5.

Lin, Y.L., Shih, T.I.P., Stephens, M.A., & Chyu, M.K. (2001). A numerical study of flow and heat transfer in a smooth and ribbed U-duct with and without rotation. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 123(2), 219-232.ASME International. doi: 10.1115/1.1345888.

Venkatesan, G., Jin, G.P., Chyu, M.C., Zheng, J.X., & Chu, T.Y. (2001). Measurement of thermophysical properties of polyurethane foam insulation during transient heating. International Journal of Thermal Sciences, 40(2), 133-144.Elsevier. doi: 10.1016/s1290-0729(00)01202-3.

Zeng, X., Chyu, M.C., & Ayub, Z.H. (2001). Experimental investigation on ammonia spray evaporator with triangular-pitch plain-tube bundle, Part II: evaporator performance. International Journal of Heat and Mass Transfer, 44(11), 2081-2092.Elsevier. doi: 10.1016/s0017-9310(00)00251-9.

Zeng, X., Chyu, M.C., & Ayub, Z.H. (2001). Experimental investigation on ammonia spray evaporator with triangular-pitch plain-tube bundle, Part I: tube bundle effect. International Journal of Heat and Mass Transfer, 44(12), 2299-2310.Elsevier. doi: 10.1016/s0017-9310(00)00250-7.

Chen, P.H., Hsieh, C., Peng, H.Y., & Chyu, M.K. (2000). Precise Mask Alignment Design to Crystal Orientation of (100) Silicon Wafer Using Wet Anisotropic Etching. Micromachining and Microfabrication Process Technology, 4080, 103-105.

Cheng, Y., Chang, Y.R., & Chyu, M.K. (2000). Electro-Optic SPR Sensor Using Double Coupling Waveguides. The Electrochemical Society, 2000(2).

Cheng, Y., Chang, Y.R., Lin, C.H., Hsu, L., & Chyu, M.K. (2000). Electro-optically modulated biomolecular interaction analysis sensor. In Alfano, R.R., Ho, P.P., & Chiou, A.E.T. (Eds.). Proceedings of SPIE--the International Society for Optical Engineering, 4082, 181-191.SPIE, the international society for optics and photonics. doi: 10.1117/12.390544.

Cheng, Y., Shew, B.Y., Lin, C.H., & Chyu, M.K. (2000). Concepts for creating ultra-deep trenches using deep X-ray lithography. SENSORS AND ACTUATORS A-PHYSICAL, 82(1-3), 205-209.Elsevier. doi: 10.1016/S0924-4247(99)00333-7.

Cheng, Y., Shew, B.Y., Lin, C.Y., Wei, D.H., & Chyu, M.K. (1999). Ultra-deep LIGA process. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 9(1), 58-63.IOP Publishing. doi: 10.1088/0960-1317/9/1/307.

Chyu, M.K., Hsing, Y., Natarajan, V., & Chiou, J.S. (1999). Effects of perpendicular flow entry on convective heat/mass transfer from pin-fin arrays. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 121(3), 668-674.ASME International. doi: 10.1115/1.2826031.

Chyu, M.K., Hsing, Y.C., Shih, T.I.P., & Natarajan, V. (1999). Heat transfer contributions of pins and endwall in pin-fin arrays: Effects of thermal boundary condition modeling. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 121(2), 257-263.ASME International. doi: 10.1115/1.2841309.

Chyu, M.K., Hsing, Y.C., Shih, T.I.P., & Natarajan, V. (1999). Heat Transfer Contributions of Pins and Endwall in Pin-Fin Arrays: Effects of Thermal Boundary Condition Modeling. Journal of Turbomachinery, 121(2), 257-263.ASME International. doi: 10.1115/1.2841309.

Chyu, M.K., Yu, Y., & Ding, H. (1999). Heat transfer enhancement in rectangular channels with concavities. JOURNAL OF ENHANCED HEAT TRANSFER, 6(6), 429-439.Begell House. doi: 10.1615/JEnhHeatTransf.v6.i6.40.

Divo, E., Kassab, A.J., Kapat, J.S., & Chyu, M.K. (1999). Retrieval of multidimensional heat transfer coefficient distributions using an inverse bem-based regularized algorithm: numerical and experimental results. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 364-1(1), 235-244.

Xia, C., Murthy, J.Y., Chyu, M.K., & Cheng, Y. (1999). Multi-dimensional calculation of coupled flow and electrodeposition in microscopic trenches. Proceedings of SPIE - The International Society for Optical Engineering, 3874, 373-383.

Chyu, M.K., Ding, H., Downs, J.P., & Soechting, F.O. (1998). Determination of local heat transfer coefficient based on bulk mean temperature using a transient liquid crystals technique. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 18(2), 142-149.Elsevier. doi: 10.1016/S0894-1777(98)10016-X.

Chyu, M.K., Hsing, Y.C., & Natarajan, V. (1998). Heat Transfer Enhancement of Cubic Fin Arrays in a Narrow Channel. J. Turbomachinery, Trans. ASME, 120, 363-367.

Chyu, M.K., Hsing, Y.C., & Natarajan, V. (1998). Convective Heat Transfer of Cubic Fin Arrays in a Narrow Channel. Journal of Turbomachinery, 120(2), 362-367.ASME International. doi: 10.1115/1.2841414.

Chyu, M.K., Yen, C.H., & Shih, I.P. (1998). Effects of Bulk-Flow Pulsation on Film Cooling. Application of Heat Transfer in Equipment, Systems, and Education, 361(3), 441-450.

Yu, Y., & Chyu, M.K. (1998). Influence of gap leakage downstream of the injection holes on film cooling performance. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 120(3), 541-548.ASME International. doi: 10.1115/1.2841751.

Yu, Y., & Chyu, M.K. (1998). Influence of Gap Leakage Downstream of the Injection Holes on Film Cooling Performance. Journal of Turbomachinery, 120(3), 541-548.ASME International. doi: 10.1115/1.2841751.

Chyu, M.K., & Ding, H. (1997). Heat transfer in a cooling channel with vortex generators. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 119(2), 206.ASME International. doi: 10.1115/1.2824205.

Shih, T.I., & Chyu, M.K. (1997). Computation of Flow and Heat Transfer in a Rotating Passage with Ribs and a U-Bend. Tenth International Symposium on Transport Phenomena (ISTP 10) in Thermal Science and Process Engineering, 3, 601-606.

Chyu, M.K., & Natarajan, V. (1996). Heat transfer on the base surface of three-dimensional protruding elements. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 39(14), 2925-2935.Elsevier. doi: 10.1016/0017-9310(95)00381-9.

Chyu, M.K., Hsing, Y.C., & Yu, Y. (1996). Measurements of surface temperature and heat transfer using a fluorescence imaging system based on thermographic phosphors. International Symposium on Heat Transfer, 218-223.

Chyu, M.K., Hsing, Y.C., Natarajan, V., & Chiu, J.S. (1996). Convective Heat Transfer from Pin Fin Arrays with Perpendicular Flow Entry. ASME, 329, 45-52.

Ding, H., Chyu, M.K., & Pien, S.J. (1996). Three-dimensional numerical simulation of gas dynamics effects on spray forming process. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 323(1), 95-102.

Rivir, R.B., Chyu, M.K., & Maciejewski, P.K. (1996). Turbulence and Scale Measurements in a Square Channel with Transverse Square Ribs. International Journal of Rotating Machinery, 2(3), 209-218.Wiley. doi: 10.1155/s1023621x96000085.

BIZZAK, D.J., & CHYU, M.K. (1995). USE OF A LASER-INDUCED FLUORESCENCE THERMAL IMAGING-SYSTEM FOR LOCAL JET IMPINGEMENT HEAT-TRANSFER MEASUREMENT. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 38(2), 267-274.Elsevier. doi: 10.1016/0017-9310(95)90013-6.

Cheng, K.C., Shi, L., Kurokawa, M., & Chyu, M.K. (1995). Visualization of Flow Patterns in a 180-Degree Sharp Turn of a Square Duct. Dynamics of Rotating Machinery, 2, 178-187.

Chyu, M.K., & Natarajan, V. (1995). Surface heat transfer from a three-pass blade cooling passage simulator. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 117(4), 650-656.ASME International. doi: 10.1115/1.2836584.

Chyu, M.K., Ding, H., Pien, S.J., & Luo, J. (1995). Modeling of droplet flow, temperature and solidification in a spray forming process. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 317-2(2), 371-380.

Ervin, J., Murawski, C., MacArthur, C., Bizzak, D.J., & Chyu, M.K. (1995). Temperature Measurement of a Curved Surface Using Thermographic Phosphors. Experimental Thermal and Fluid Science, 11(4), 383-394.

ERVIN, J., MURAWSKI, C., MACARTHUR, C., CHYU, M., & BIZZAK, D. (1995). TEMPERATURE-MEASUREMENT OF A CURVED SURFACE USING THERMOGRAPHIC PHOSPHORS. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 11(4), 387-394.Elsevier. doi: 10.1016/0894-1777(95)00061-5.

BIZZAK, D.J., & CHYU, M.K. (1994). RARE-EARTH PHOSPHOR LASER-INDUCED FLUORESCENCE THERMAL IMAGING-SYSTEM. REVIEW OF SCIENTIFIC INSTRUMENTS, 65(1), 102-107.AIP Publishing. doi: 10.1063/1.1144780.

CHYU, M.K., & BIZZAK, D.J. (1994). SURFACE-TEMPERATURE MEASUREMENT USING A LASER-INDUCED FLUORESCENCE THERMAL IMAGING-SYSTEM. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 116(1), 263-266.ASME International. doi: 10.1115/1.2910873.

Natarajan, V., & Chyu, M.K. (1994). Convective Heat Transfer from Finite Cylinders Mounted on a Plane Wall. Heat Transfer, 3, 71-77.

Natarajna, V., & Chyu, M.K. (1994). Effects of Flow-Angle-of-Attack on Heat Transfer from the Surface of a Wall-Mounted Cube. J. Heat Transfer, Trans. ASME, 116(3), 552-560.

Rivir, R.B., Chyu, M.K., & Maciejewski, P.K. (1994). Turbulence in a square channel with transverse ribs. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 300, 155-163.

Wang, T.S., & Chyu, M.K. (1994). Convective Heat Transfer in a 180-Degree Sharp-Turn Duct with Different Turn Configurations. J. Thermophysics and Heat Transfer, 8(3), 595-601.

WANG, T.S., & CHYU, M.K. (1994). HEAT CONVECTION IN A 180-DEG TURNING DUCT WITH DIFFERENT TURN CONFIGURATIONS. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 8(3), 595-601.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.583.

Chyu, M.K., & Bizzak, D.J. (1993). Two-dimensional laser-induced fluorescence temperature measurement on a rotating surface. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 252, 47-53.

CHYU, M.K., & NATARAJAN, V. (1993). EFFECTS OF A SLIT IN A RIB ON THE HEAT-TRANSFER FROM A RIB-MOUNTED WALL. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 115(3), 792-796.ASME International. doi: 10.1115/1.2910757.

Chyu, M.K., Natarajan, V., & Chiou, J.S. (1993). Heat transfer from arrays of cubes exposed to an external boundary layer flow. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 263, 79-87.

Ervin, J., Bizzak, D.J., Murawski, C., Chyu, M.K., & MacArthur, C. (1993). Surface temperature determination of a cylinder in cross flow with thermographic phosphors. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 252, 39-46.

Chyu, M.K., & Bizzak, D.J. (1992). Effects of Axial- and Radial-Gap Spacing on the Heat Transfer Characteristics of a Shrouded Rotor-Stator System. J. Heat Transfer, Trans. ASME, 114, 1051-1054.

Chyu, M.K., & Bizzak, D.J. (1992). Surface Heat Transfer in Hubbed Rotor-Stator and a Clamped Co-rotating Disk Assembly With and Without Axial Source Flow. Advances in Information Storage Systems, 4, 393-404.

CHYU, M.K., & BIZZAK, D.J. (1992). EFFECTS OF AXIAL AND RADIAL-GAP SPACING ON THE LOCAL HEAT-TRANSFER OF A SHROUDED ROTOR-STATOR SYSTEM. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 114(4), 1051-1053.ASME International. doi: 10.1115/1.2911878.

Chyu, M.K., & Oberly, C.E. (1992). Influence of Operating Temperature on Stability and Quench of Oxide High-Tc Superconductors. Advances in Cryogenic Engineering, 37(A), 307-313.

CHYU, M.K., & OBERLY, C.E. (1992). INFLUENCE OF OPERATING TEMPERATURE AND CONTACT THERMAL-RESISTANCE ON NORMAL ZONE PROPAGATION IN A METAL-SHEATHED HIGH-TC SUPERCONDUCTOR TAPE. CRYOGENICS, 32(5), 519-526.Elsevier. doi: 10.1016/0011-2275(92)90088-R.

Chyu, M.K., Natarajan, V., & Metzger, D.E. (1992). Heat/mass transfer from pin-fin arrays with perpendicular flow entry. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 226, 31-39.

CHYU, M.K. (1991). REGIONAL HEAT-TRANSFER IN 2-PASS AND 3-PASS PASSAGES WITH 180-DEG SHARP TURNS. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 113(1), 63-70.ASME International. doi: 10.1115/1.2910553.

CHYU, M.K., & GOLDSTEIN, R.J. (1991). INFLUENCE OF AN ARRAY OF WALL-MOUNTED CYLINDERS ON THE MASS-TRANSFER FROM A FLAT SURFACE. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 34(9), 2175-2186.Elsevier. doi: 10.1016/0017-9310(91)90044-F.

CHYU, M.K., & NATARAJAN, V. (1991). LOCAL HEAT MASS-TRANSFER DISTRIBUTIONS ON THE SURFACE OF A WALL-MOUNTED CUBE. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 113(4), 851-857.ASME International. doi: 10.1115/1.2911213.

Chyu, M.K., & Oberly, C.E. (1991). Effects of Transverse Heat Transfer on Normal Zone Propagation in Metal-Clad HTS Coil Tapes. Cryogenics, 31, 680-686.

Chyu, M.K., & Oberly, C.E. (1991). Influence of operating temperature on stability and quench of oxide high-Tc superconductors. 37, 307-313.

CHYU, M.K., & OBERLY, C.E. (1991). NUMERICAL MODELING OF NORMAL ZONE PROPAGATION AND HEAT-TRANSFER IN A SUPERCONDUCTING COMPOSITE TAPE. IEEE TRANSACTIONS ON MAGNETICS, 27(2), 2100-2103.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/20.133625.

CHYU, M.K., & OBERLY, C.E. (1991). EFFECTS OF TRANSVERSE HEAT-TRANSFER ON NORMAL ZONE PROPAGATION IN METAL-CLAD HIGH-TEMPERATURE SUPERCONDUCTOR COIL TAPE. CRYOGENICS, 31(7), 680-686.Elsevier. doi: 10.1016/0011-2275(91)90073-6.

Metzger, D.E., Chyu, M.K., & Bunker, R.S. (1991). The Contribution of On-Rib Heat Transfer Coefficients to Total Heat Transfer from Rib-Roughened Surfaces. Dynamic of Rotating Machinery, 1, 299-307.

CHYU, M.K. (1990). HEAT-TRANSFER AND PRESSURE-DROP FOR SHORT PIN-FIN ARRAYS WITH PIN-ENDWALL FILLET. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 112(4), 926-932.ASME International. doi: 10.1115/1.2910502.

Chyu, M.K., & Schwarz, S.G. (1990). Effects of Bottom Injection on Heat Transfer and Fluid Flow in Rectangular Cavities. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 4(4), 521-526.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.216.

Chyu, M.K. (1989). Regional Heat Transfer and Pressure Drop in Two-Pass and Three-Pass Flow Passages With 180-Degree Sharp Turns. Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration, 4, v004t08a024.ASME International. doi: 10.1115/89-gt-191.

Chyu, M.K., & Wu, L.X. (1989). Combined Effects of Rib Angle-Of-Attack and Pitch-To-Height Ratio on Heat Transfer from a Ribbed Surface. J. Experimental Heat Transfer, 2, 291-308.

Chyu, M.K., & Wu, L.X. (1989). COMBINED EFFECTS OF RIB ANGLE-OF-ATTACK AND PITCH-TO-HEIGHT RATIO ON MASS TRANSFER FROM A SURFACE WITH TRANSVERSE RIBS. EXPERIMENTAL HEAT TRANSFER, 2(4), 291-308.Taylor & Francis. doi: 10.1080/08916158908946370.

Chyu, M.K., Moon, H.K., & Metzger, D.E. (1989). Heat Transfer in the Tip Region of Grooved Turbine Blades. Journal of Turbomachinery, 111(2), 131-138.ASME International. doi: 10.1115/1.3262247.

Metzger, D.E., Bunker, R.S., & Chyu, M.K. (1989). Cavity Heat Transfer on a Transverse Grooved Wall in a Narrow Flow Channel. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 111(1-4), 73-79. doi: 10.1115/1.3250661.

METZGER, D.E., BUNKER, R.S., & CHYU, M.K. (1989). CAVITY HEAT-TRANSFER ON A TRANSVERSE GROOVED WALL IN A NARROW FLOW CHANNEL. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 111(1), 73-79.ASME International. doi: 10.1115/1.3250661.

Chyu, M.K., Metzger, D.E., & Hwan, C.L. (1987). Heat transfer in shrouded rectangular cavities. Journal of Thermophysics and Heat Transfer, 1(3), 247-252.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.35.

Chyu, M.K., & Goldstein, R.J. (1986). Local Mass Transfer from Rectangular Cavities with Turbulent Separated Flow. Heat Transfer, 3, 1065-1070.

GOLDSTEIN, R.J., CHYU, M.K., & HAIN, R.C. (1985). MEASUREMENT OF LOCAL MASS-TRANSFER ON A SURFACE IN THE REGION OF THE BASE OF A PROTRUDING CYLINDER WITH A COMPUTER-CONTROLLED DATA ACQUISITION-SYSTEM. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 28(5), 977-985.Elsevier. doi: 10.1016/0017-9310(85)90279-0.

SPARROW, E.M., & CHYU, M.K. (1982). CONJUGATE FORCED CONVECTION-CONDUCTION ANALYSIS OF HEAT-TRANSFER IN A PLATE FIN. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 104(1), 204-206.ASME International. doi: 10.1115/1.3245055.

Min, Z., Wu, Y., Yang, K., Xu, J., Parbat, S.N., & Chyu, M.K. (2020). Dimensional Characterizations Using SEM and Surface Improvement With Electrochemical Polishing of Additively Manufactured Microchannels. In Volume 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines, 8.ASME International. doi: 10.1115/gt2020-14842.

Min, Z., Parbat, S.N., Yang, L., & Chyu, M.K. (2019). Thermal-Fluid and Mechanical Investigations of Additively Manufactured Geometries for Transpiration Cooling. In Volume 5B: Heat Transfer, 5B-2019.ASME International. doi: 10.1115/gt2019-91583.

Parbat, S., Min, Z., Yang, L., & Chyu, M. (2019). Experimental and Numerical Analysis of Additively Manufactured Inconel 718 Coupons With Lattice Structure. In Volume 5B: Heat Transfer, 5B-2019.ASME International. doi: 10.1115/gt2019-91949.

Parbat, S., Yang, L., Chyu, M., Siw, S.C., & Lee, C.P. (2019). Numerical Study of Heat Transfer in Novel Wavy Trailing Edge Design for Gas Turbine Airfoils. In Volume 5A: Heat Transfer, 5A-2019.ASME International. doi: 10.1115/gt2019-91123.

Chia, E., Kang, B.S., Zheng, M., Li, Y., & Chyu, M. (2018). Development of ODS Coating for High Temperature Turbine Components Using DED Additive Manufacturing. In Volume 6: Ceramics; Controls, Diagnostics, and Instrumentation; Education; Manufacturing Materials and Metallurgy, 6, (p. v006t24a016).ASME International. doi: 10.1115/gt2018-76274.

Chia, E., Kang, B.S., Zheng, M., Li, Y., & Chyu, M. (2018). ODS Coating for Critical Turbine Components Using DED Additive Manufacturing. In Volume 2: Advanced Manufacturing, 2, (p. v002t02a055).ASME International. doi: 10.1115/imece2018-87512.

Hu, K.S.Y., Chi, X., Shih, T.I.P., Chyu, M., & Crawford, M. (2018). Steady RANS of Flow and Heat Transfer in a Smooth and Pin-Finned U-Duct With a Trapezoidal Cross Section. In Volume 5A: Heat Transfer, 5A-2018, (p. v05at11a004).ASME International. doi: 10.1115/gt2018-75530.

Kang, B.S., Kim, J., Chia, E., Li, Y., & Chyu, M. (2018). ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components. In Conference Proceedings of the Society for Experimental Mechanics Series, 9, (pp. 65-71).Springer Nature. doi: 10.1007/978-3-319-62834-9_9.

Min, Z., Huang, G., Parbat, S.N., Yang, L., & Chyu, M.K. (2018). Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures. In Volume 5B: Heat Transfer, 5B-2018, (p. v05bt21a003).ASME International. doi: 10.1115/gt2018-76166.

Parbat, S.N., Yang, L., Min, Z., & Chyu, M.K. (2018). Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets. In Volume 5A: Heat Transfer, 5A-2018, (p. v05at16a016).ASME International. doi: 10.1115/gt2018-77000.

Yang, L., Min, Z., Parbat, S.N., & Chyu, M.K. (2018). Effect of pore blockage on transpiration cooling with additive manufacturable perforate holes. In Proceedings of the ASME Turbo Expo, 2D-2018. doi: 10.1115/GT201875310.

Barry, M.M., Hung, C., Kim, J., Kisch, L., Nowakowski, P., Garcia, C., & Chyu, M. (2017). Grain Boundary Engineering of Bulk Polycrystalline Bismuth Telluride through Uniaxial Pressing and Annealing - The Effects of Processing Parameters on Texture and Thermoelectric Performance. In International Conference on Thermoelectrics.Pasadena, CA.

Min, Z., Parbat, S.N., Yang, L., Kang, B., & Chyu, M.K. (2017). Fabrication and Characterization of Additive Manufactured Nickel-Based ODS Coating Layer for High Temperature Application. In Volume 6: Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy, 6, (p. v006t24a010).ASME International. doi: 10.1115/gt2017-63714.

Yang, L., Min, Z., Parbat, S.N., & Chyu, M.K. (2017). Optimization of Hybrid-Linked Jet Impingement Cooling Channels Based on Response Surface Methodology and Genetic Algorithm. In Volume 5A: Heat Transfer, 5A-2017, (p. v05at11a002).ASME International. doi: 10.1115/gt2017-63278.

Parbat, S.N., Siw, S.C., & Chyu, M.K. (2016). Impingement Cooling in Narrow Rectangular Channel With Novel Surface Features. In Volume 5A: Heat Transfer, 5A-2016, (p. v05at13a033).ASME International. doi: 10.1115/gt2016-58084.

Siw, S.C., Chyu, M.K., Um, J.Y., & Lee, C.P. (2016). Detailed Experimental Characterization of Heat Transfer Coefficient Over the Internal Cooling Passages of an Additive Manufactured Turbine Airfoil. In Volume 5A: Heat Transfer, 5A-2016, (p. v05at13a029).ASME International. doi: 10.1115/gt2016-57787.

Yang, L., Li, W., Ren, J., Chyu, M., & Jiang, H. (2016). Influence of Topology on Heat Transfer in a Double Wall Cooling Channel: Potential of Series-Linked Jets. In Volume 5B: Heat Transfer, 5B-2016, (p. v05bt11a004).ASME International. doi: 10.1115/gt2016-56270.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2015). Heat Transfer Enhancement and Pressure Loss Characteristics of Zig-Zag Channel With Dimples and Protrusions. In Volume 5B: Heat Transfer, 5B, (p. v05bt13a025).ASME International. doi: 10.1115/gt2015-43852.

Siw, S.C., Fradeneck, A.D., Chyu, M.K., & Alvin, M.A. (2015). The Effects of Different Pin-Fin Arrays on Heat Transfer and Pressure Loss in a Narrow Channel. In Volume 5B: Heat Transfer, 5B, (p. v05bt13a026).ASME International. doi: 10.1115/gt2015-43855.

Zhou, Y., Siw, S.C., Schade, C., Chyu, M., & Garcia, C.I. (2015). Development and optimization for metallic parts/components using powder bed additive manufacturing. In Materials Science and Technology Conference and Exhibition 2015, MS and T 2015, 2, (pp. 1641-1651).

Alvin, M.A., Klinger, J., McMordie, B., Chyu, M., Siw, S., Miller, N., Reddy, B.V.K., Gleeson, B., Anderson, I., Heidloff, A., Ekkad, S., Ramesh, S., & Kang, B. (2014). NETL Research Efforts on Development and Integration of Advanced Material Systems and Airfoil Cooling Configurations for Future Land-Based Gas Turbine Engines. In Volume 6: Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy, 6, (p. v006t22a006).ASME International. doi: 10.1115/gt2014-25640.

Guo, H., Kang, B.S., Siw, S.C., & Chyu, M. (2014). Development of a new high temperature rechargeable Li/Mg battery system. In 31st Annual International Pittsburgh Coal Conference: Coal - Energy, Environment and Sustainable Development, PCC 2014.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2014). Trailing Edge Cooling of Gas Turbine Airfoil Using Blockages With Straight and Inclined Holes. In Volume 5B: Heat Transfer, 5B, (p. v05bt14a020).ASME International. doi: 10.1115/gt2014-27081.

Siw, S.C., Miller, N., Chyu, M.K., & Alvin, M.A. (2014). Heat Transfer and Pressure Loss Characteristics of a Narrow Internal Cooling Passage at Low Reynolds Number. In Volume 5A: Heat Transfer, 5A, (p. v05at12a047).ASME International. doi: 10.1115/gt2014-27077.

Miller, N., Siw, S.C., Chyu, M.K., & Alvin, M.A. (2013). Effects of Jet Diameter and Surface Roughness on Internal Cooling With Single Array of Jets. In Volume 3A: Heat Transfer, 3, (p. v03at12a038).ASME International. doi: 10.1115/gt2013-95400.

Miller, N., Siw, S.C., Chyu, M.K., & Alvin, M.A. (2013). Optimization of Single Row Jet Impingement Array by Varying Flow Rates. In Volume 3: Gas Turbine Heat Transfer; Transport Phenomena in Materials Processing and Manufacturing; Heat Transfer in Electronic Equipment; Symposium in Honor of Professor Richard Goldstein; Symposium in Honor of Prof. Spalding; Symposium in Honor of Prof. Arthur E. Bergles, 3, (p. v003t20a006).ASME International. doi: 10.1115/ht2013-17342.

Oommen, K., Imam, S., & Chyu, M. (2013). Development of a Seizure Warning System Based on Continuous Cerebral Blood Flow Measurement. In NEUROLOGY, 80.

Phuoc, T.X., Mcintyre, D., Song, X., & Chyu, M.K. (2013). Synthesis and characterization of nanocomposites using the nanoscale laser soldering in liquid technique. In Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013, 1, (pp. 467-470).

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2013). Effects of Pin Detached Space on Heat Transfer in a Rib Roughened Channel. In JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135(2), (p. 021029).ASME International. doi: 10.1115/1.4006567.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2013). Heat Transfer and Pressure Loss Characteristics of Zig-Zag Channel With Rib-Turbulators. In Volume 3A: Heat Transfer, 3, (p. v03at12a039).ASME International. doi: 10.1115/gt2013-95407.

Wang, Y., Chyu, M.K., & Wang, Q.M. (2013). Passive Wireless Surface Acoustic Wave CO2 Sensor for Geological Sequestration Sites Monitoring. In 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFC), (pp. 470-473).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/eftf-ifc.2013.6702243.

Chyu, M.K. (2012). Recent Advances in Turbine Heat Transfer-With A View of Transition to Coal-Gas Based Systems. In JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 134(3), (p. 031006).ASME International. doi: 10.1115/1.4005148.

Li, J., Barry, M., Ma, Y., Wu, A., & Chyu, M.K. (2012). Analytical and experimental studies on an innovative composite approach for enhanced thermoelectric performance. In AIP Conference Proceedings, 1449(1), (pp. 69-72).AIP Publishing. doi: 10.1063/1.4731499.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2012). Heat Transfer Enhancement of Internal Cooling Passage With Triangular and Semi-Circular Shaped Pin-Fin Arrays. In Volume 4: Heat Transfer, Parts A and B, 4(PARTS A AND B), (pp. 493-503).ASME International. doi: 10.1115/gt2012-69266.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2012). Investigation of Heat Transfer Enhancement and Pressure Characteristics of Zig-Zag Channels. In Volume 4: Heat Transfer, Parts A and B, 4(PARTS A AND B), (pp. 505-515).ASME International. doi: 10.1115/gt2012-69268.

Siw, S.C., Chyu, M.K., Shih, T.I.P., & Alvin, M.A. (2012). Effects of Pin Detached Space on Heat Transfer and Pin-Fin Arrays. In JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 134(8), (p. 081902).ASME International. doi: 10.1115/1.4006166.

Straub, D.L., Sidwell, T.G., Casleton, K.H., Alvin, M.A., Chien, S., & Chyu, M.K. (2012). High Temperature Film Cooling Test Facility and Preliminary Test Results. In Volume 4: Heat Transfer, Parts A and B, 4(PARTS A AND B), (pp. 1661-1671).ASME International. doi: 10.1115/gt2012-69767.

Chi, X., Shih, T.I.P., Bryden, K.M., Siw, S., Chyu, M.K., Ames, R., & Dennis, R.A. (2011). Effects of Pin-Fin Height on Flow and Heat Transfer in a Rectangular Duct. In Volume 5: Heat Transfer, Parts A and B, 5(PARTS A AND B), (pp. 1435-1445).ASME International. doi: 10.1115/gt2011-46014.

Ganmol, P., Chyu, M.K., & Alvin, M.A. (2011). Heat Transfer Enhancement in Tip-Turn Region of Two-Pass Channel With a 180-Degree Turn. In Volume 5: Heat Transfer, Parts A and B, 5(PARTS A AND B), (pp. 1559-1569).ASME International. doi: 10.1115/gt2011-46189.

Hu, S.Y., Chi, X., Shih, T.I.P., Bryden, K.M., Chyu, M.K., Ames, R., & Dennis, R.A. (2011). Flow and Heat Transfer in the Tip-Turn Region of a U-Duct Under Rotating and Non-Rotating Conditions. In Volume 5: Heat Transfer, Parts A and B, 5(PARTS A AND B), (pp. 1421-1433).ASME International. doi: 10.1115/gt2011-46013.

Kao, M.T., Tung, Y.H., Ferng, Y.M., Chieng, C.C., & Chyu, M. (2011). Heat transfer characteristics for pebble beds in HTGR. In Transactions of the American Nuclear Society, 104, (pp. 978-979).

Karaivanov, V.G., Slaughter, W.S., Siw, S., Chyu, M.K., & Alvin, M.A. (2011). Compressive Creep Testing of Thermal Barrier Coated Nickel-Based Superalloys. In JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 133(9), (p. 091301).ASME International. doi: 10.1115/1.4002816.

Siw, S.C., Chyu, M.K., & Alvin, M.A. (2011). Effects of Pin Detached Space on Heat Transfer in a Rib Roughened Channel. In Volume 5: Heat Transfer, Parts A and B, 5(PARTS A AND B), (pp. 1483-1493).ASME International. doi: 10.1115/gt2011-46078.

Wang, Y., Li, Z., Qin, L., Chyu, M.K., & Wang, Q.M. (2011). Surface acoustic wave flow sensor. In 2011 Joint Conference of the IEEE International Frequency Control and the European Frequency and Time Forum (FCS) Proceedings, (pp. 1-4).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/fcs.2011.5977735.

Ganmol, P., & Chyu, M.K. (2010). Heat Transfer Enhancement Induced by Cube- and Diamond-Shaped Block Arrays in Two-Pass High-Aspect Ratio Channels With a 180-Degree Turn. In Volume 7: Fluid Flow, Heat Transfer and Thermal Systems, Parts A and B, 7(PARTS A AND B), (pp. 201-210).ASME International. doi: 10.1115/imece2010-39281.

Lee, J.K., Son, Y.H., Tran, P., Soong, Y., Martello, D., & Chyu, M. (2010). Catalytic properties of clay based hybrid materials for drilling operations. In Society of Petroleum Engineers Western North American Regional Meeting 2010 - In Collaboration with the Joint Meetings of the Pacific Section AAPG and Cordilleran Section GSA, 2, (pp. 1145-1148).

Siw, S.C., Chyu, M.K., Shih, T.I.P., & Alvin, M.A. (2010). Effects of Pin Detached Space on Heat Transfer and From Pin Fin Arrays. In Volume 4: Heat Transfer, Parts A and B, 4(PARTS A AND B), (pp. 491-500).ASMEDC. doi: 10.1115/gt2010-23227.

Uysal, U., Sahin, F., & Chyu, M.K. (2010). Experimental and Theoretical Analysis of Heat Transfer Characteristics in a Rectangular Duct with Jet Impingement. In HEAT TRANSFER RESEARCH, 41(8), (pp. 901-913).Begell House. doi: 10.1615/HeatTransRes.v41.i8.80.

Chyu, M.K., Siw, S.C., & Moon, H.K. (2009). Effects of Height-to-Diameter Ratio of Pin Element on Heat Transfer From Staggered Pin-Fin Arrays. In Volume 3: Heat Transfer, Parts A and B, 3(PART A), (pp. 705-713).ASME International. doi: 10.1115/gt2009-59814.

Karaivanov, V.G., Siw, S., Chyu, M.K., Slaughter, W.S., & Alvin, M.A. (2009). Substrate Damage Modeling for Advanced Turbine System Airfoils. In Volume 1: Aircraft Engine; Ceramics; Coal, Biomass and Alternative Fuels; Controls, Diagnostics and Instrumentation; Education; Electric Power; Awards and Honors, 1, (pp. 309-317).ASME International. doi: 10.1115/gt2009-60112.

Park, J.S., Kim, K.M., Lee, D.H., Cho, H.H., & Chyu, M. (2009). Heat Transfer in Rotating Channel With Inclined Pin-Fins. In Volume 3: Heat Transfer, Parts A and B, 3(PART A), (pp. 669-678).ASME International. doi: 10.1115/gt2009-59741.

Siw, S.C., Chyu, M.K., Karaivanov, V.G., Slaughter, W.S., & Alvin, M.A. (2009). Influence of Internal Cooling Configuration on Metal Temperature Distributions of Future Coal-Fuel Based Turbine Airfoils. In Volume 3: Heat Transfer, Parts A and B, 3(PART B), (pp. 725-736).ASME International. doi: 10.1115/gt2009-59829.

Wang, Y., Chung, S.J., Leonard, J.P., Cho, S.K., Phuoc, T., Soong, Y., & Chyu, M.K. (2009). Cooling Performance of Nanofluids in a Microchannel Heat Sink. In ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer, Volume 1, 1, (pp. 617-623).ASME International. doi: 10.1115/mnhmt2009-18511.

Alvin, M.A., Pettit, F., Meier, G., Yanar, N., Chyu, M., Mazzotta, D., Slaughter, W., Karaivanov, V., Kang, B., Feng, C., Chen, R., & Fu, T.C. (2008). Materials and component development for advanced turbine systems. In Advances in Materials Technology for Fossil Power Plants - Proceedings from the 5th International Conference, (pp. 413-423). doi: 10.1361/cp2007epri0413.

Foulke, L., Helling, D.W., Sena, P., Shuman, L., & Chyu, M. (2008). Constituency driven graduate level education in nuclear engineering. In Transactions of the American Nuclear Society, 99, (pp. 119-120).

Karaivanov, V.G., Mazzotta, D.W., Chyu, M.K., Slaughter, W.S., & Alvin, M.A. (2008). Three-Dimensional Modeling of Creep Damage in Airfoils for Advanced Turbine Systems. In Volume 5: Structures and Dynamics, Parts A and B, 5(PART A), (pp. 225-234).ASME International. doi: 10.1115/gt2008-51278.

Park, J.S., Kim, K.M., Lee, D.H., Cho, H.H., & Chyu, M.K. (2008). Heat Transfer on Rotating Channel With Various Heights of Pin-Fin. In Volume 4: Heat Transfer, Parts A and B, 4(PART A), (pp. 727-734).ASME International. doi: 10.1115/gt2008-50783.

Phuoc, T.X., Soong, Y., & Chyu, M.K. (2008). Nanofluid Generation Using Multi-Beam Laser Ablation Technique. In ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer, Parts A and B, PART A, (pp. 615-621).ASME International. doi: 10.1115/mnht2008-52357.

Chyu, M.K., Oluyede, E.O., & Moon, H.K. (2007). Heat Transfer on Convective Surfaces With Pin-Fins Mounted in Inclined Angles. In Volume 4: Turbo Expo 2007, Parts A and B, 4 PART B, (pp. 861-869).ASME International. doi: 10.1115/gt2007-28138.

Chyu, M.K., Yen, C.H., & Siw, S. (2007). Comparison of Heat Transfer From Staggered Pin Fin Arrays With Circular, Cubic and Diamond Shaped Elements. In Volume 4: Turbo Expo 2007, Parts A and B, 4 PART B, (pp. 991-999).ASME International. doi: 10.1115/gt2007-28306.

Foulke, L., Shuman, L., & Chyu, M. (2007). A new nuclear educational program at the University of Pittsburgh. In CONTE 2007: Conference on Nuclear Training and Education, 2007, (pp. 69-70).

Mazzotta, D.W., Chyu, M.K., & Alvin, M.A. (2007). Airfoil Heat Transfer Characteristics in Syngas and Hydrogen Turbines. In Volume 3: Turbo Expo 2007, 3, (pp. 793-801).ASME International. doi: 10.1115/gt2007-28296.

Zhu, B., Chi, X., Dennis, R.A., Chyu, M.K., Bryden, M.A., & Shih, T.I.P. (2007). Internal Cooling Inside an L-Shaped Duct With Pin-Fin Turbulators Under Rotating and Non-Rotating Conditions With and Without Sand Particles. In Volume 4: Turbo Expo 2007, Parts A and B, 4 PART A, (pp. 533-543).ASME International. doi: 10.1115/gt2007-27598.

Chen, S.P., Li, P.W., & Chyu, M.K. (2006). Optimization of Gas Delivery and Current Collecting System in Fuel Cells. In ASME 2006 Fourth International Conference on Fuel Cell Science, Engineering and Technology, Parts A and B, 2006, (pp. 127-132).ASME International. doi: 10.1115/fuelcell2006-97063.

Chen, S.P., Li, P.W., Chyu, M.K., Cunha, F.J., & Abdel-Messeh, W. (2006). Heat Transfer in an Airfoil Trailing Edge Configuration With Shaped Pedestals Mounted Internal Cooling Channel and Pressure Side Cutback. In Volume 3: Heat Transfer, Parts A and B, 3 PART A, (pp. 819-828).ASME International. doi: 10.1115/gt2006-91019.

Cunha, F.J., Abdel-Messeh, W., & Chyu, M.K. (2006). Thermal Analysis and Durability Design Strategies for Gas Turbine Airfoils. In Volume 3: Heat Transfer, Parts A and B, 3 PART A, (pp. 787-803).ASME International. doi: 10.1115/gt2006-91013.

Cunha, F.J., Dahmer, M.T., & Chyu, M.K. (2006). Analysis of airfoil trailing edge heat transfer and its significance in thermal-mechanical design and durability. In JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 128(4), (pp. 738-746).ASME International. doi: 10.1115/1.2220047.

Cunha, F.J., Seetharaman, V., & Chyu, M.K. (2006). Thermal-Mechanical Life Prediction System for Coated Anisotropic Turbine Components. In Volume 3: Heat Transfer, Parts A and B, 3 PART A, (pp. 805-817).ASME International. doi: 10.1115/gt2006-91017.

Na, S., Cunha, F.J., Chyu, M.K., & Shih, T.I.P. (2006). Effects of coating blockage and deposit on film-cooling effectiveness and surface heat transfer. In Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting, 1, (pp. 321-329).

Shih, T.I.P., Na, S., & Chyu, M. (2006). Preventing Hot Gas Ingestion by Film-Cooling Jets via Flow-Aligned Blockers. In Volume 3: Heat Transfer, Parts A and B, 3 PART B, (pp. 921-929).ASME International. doi: 10.1115/gt2006-91161.

Cunha, F.J., Dahmer, M.T., & Chyu, M.K. (2005). Thermal-Mechanical Life Prediction System for Anisotropic Turbine Components. In Volume 3: Turbo Expo 2005, Parts A and B, 3 PART A, (pp. 151-164).ASME International. doi: 10.1115/gt2005-68107.

Cunha, F.J., Dahmer, M.T., & Chyu, M.K. (2005). Analysis of Airfoil Trailing Edge Heat Transfer and Its Significance in Thermal-Mechanical Design and Durability. In Volume 3: Turbo Expo 2005, Parts A and B, 3 PART A, (pp. 165-176).ASME International. doi: 10.1115/gt2005-68108.

Kassab, A.J., Divo, E.A., Chyu, M.K., & Cunha, F.J. (2005). Inverse BEM Method to Identify Surface Temperatures and Heat Transfer Coefficient Distributions at Inaccessible Surfaces. In Volume 3: Turbo Expo 2005, Parts A and B, 3 PART A, (pp. 755-764).ASME International. doi: 10.1115/gt2005-68873.

Uysal, U., Li, P.W., Chyu, M.K., & Cunha, F.J. (2005). Heat Transfer on Internal Surfaces of a Duct Subjected to Impingement of a Jet Array With Varying Jet Hole-Size and Spacing. In Volume 3: Turbo Expo 2005, Parts A and B, 3 PART A, (pp. 141-150).ASME International. doi: 10.1115/gt2005-68106.

Li, P.W., Chen, S.P., & Chyu, M.K. (2004). New Conceptual Gas Distributor With Mass Transfer Enhancing Function in Polymer Electrolyte Fuel Cells. In 2nd International Conference on Fuel Cell Science, Engineering and Technology, (pp. 561-565).ASME International. doi: 10.1115/fuelcell2004-2521.

Li, P.W., Chen, S.P., & Chyu, M.K. (2004). A Novel Approach for Distribution of Reacting Gases With Enhanced Mass Transfer in Fuel Cells. In Advanced Energy Systems, 44, (pp. 117-123).ASME International. doi: 10.1115/imece2004-59329.

Li, P.W., Uysal, U., & Chyu, M.K. (2004). Mass Transfer Enhancement for Improving the Performance of Polymer Electrolyte Fuel Cells. In Volume 3, 3, (pp. 87-92).ASME International. doi: 10.1115/ht-fed2004-56217.

Li, P.W., Schaefer, L., & Chyu, M.K. (2003). Investigation of the Energy Budget in an Internal Reforming Tubular Type Solid Oxide Fuel Cell Through Numerical Computation. In 2003 International Joint Power Generation Conference, (pp. 923-930).ASME International. doi: 10.1115/ijpgc2003-40126.

Li, P.W., Schaefer, L., & Chyu, M.K. (2003). Interdigitated Heat/Mass Transfer and Chemical/Electrochemical Reactions in a Planar Type Solid Oxide Fuel Cell. In Heat Transfer: Volume 1, 2003, (pp. 561-568).ASME International. doi: 10.1115/ht2003-47436.

Li, P.W., Schaefer, L., & Chyu, M.K. (2003). The Energy Budget in Tubular and Planar Type Solid Oxide Fuel Cells Studied Through Numerical Simulation. In Heat Transfer, Volume 2, 374(2), (pp. 429-436).ASME International. doi: 10.1115/imece2003-42426.

Zhang, T., Li, P.W., Wang, Q.M., Schaefer, L., & Chyu, M.K. (2003). Fabrication and Performance Evaluation of Miniaturized Proton Exchange Membrane (PEM) Fuel Cells. In 1st International Fuel Cell Science, Engineering and Technology Conference, (pp. 129-136).ASME International. doi: 10.1115/fuelcell2003-1709.

Chyu, M.K., Uysal, U., & Lee, P.W. (2002). Convective Heat Transfer in a Triple-Cavity Structure Near Turbine Blade Trailing Edge. In Heat Transfer, Volume 4, 4(4), (pp. 265-272).ASME International. doi: 10.1115/imece2002-32405.

Li, P.W., Schaefer, L., Wang, Q.M., & Chyu, M.K. (2002). Computation of the Conjugating Heat Transfer of Fuel and Oxidant Separated by a Heat-Generating Cell Tube in a Solid Oxide Fuel Cell. In Heat Transfer, Volume 7, 372(7), (pp. 423-430).ASME International. doi: 10.1115/imece2002-32564.

Chen, J.L.S., Chyu, M.K., Wang, J.H.C., & Zhang, T. (2001). Thermal modeling of cultured cells in microgrooves. In Proceedings of the National Heat Transfer Conference, 1, (pp. 59-63).

Chyu, M.K., Ojo, O.B., Yen, C.H., & Nordlund, R.S. (2001). Heat Transfer of a Chord Wise-Oriented Internal Cooling Passage around a Turbine Airfoil. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 369(5), (pp. 393-403).

Oke, R., Simon, T., Shih, T., Zhu, B., Lin, Y.L., & Chyu, M. (2001). Measurements Over a Film-Cooled, Contoured Endwall With Various Coolant Injection Rates. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a025).ASME International. doi: 10.1115/2001-gt-0140.

Zhu, B., Lin, Y.L., Shih, T.I.P., Oke, R., Simon, T.W., & Chyu, M. (2001). Computational Study of a Two-Passage Turbine Guide-Vane Cascade with End-Wall Contouring. In Proceedings of the ASME Design Engineering Technical Conference, 1, (pp. 929-938).

Asako, Y., Yamaguchi, Y., Nabana, K., & Chyu, M.K. (2000). Combined effects of rotation and skew angle on the convective heat transfer in a two-pass passage with a 180-degree turn. In JOURNAL OF ENHANCED HEAT TRANSFER, 7(3), (pp. 185-199).Begell House. doi: 10.1615/JEnhHeatTransf.v7.i3.40.

Chen, P.H., Hsieh, C.M., Peng, H.Y., & Chyu, M.K. (2000). Precise mask alignment design to crystal orientation of (100) silicon wafer using wet anisotropic etching. In Karam, J.M., & Yasaitis, J.A. (Eds.). In Proceedings of SPIE--the International Society for Optical Engineering, 4174(1), (pp. 462-466).SPIE, the international society for optics and photonics. doi: 10.1117/12.396466.

Lin, Y.L., Shih, T.I.P., Chyu, M.K., & Bunker, R.S. (2000). Effects of Gap Leakage on Fluid Flow in a Contoured Turbine Nozzle Guide Vane. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a100).ASME International. doi: 10.1115/2000-gt-0555.

Chyu, M.K., Yen, C.H., Ma, W., & Shih, T.I.P. (1999). Effects of Flow Gap Atop Pin Elements on the Heat Transfer From Pin Fin Arrays. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a021).ASME International. doi: 10.1115/99-gt-047.

Kassab, A.J., Divo, E., & Chyu, M. (1999). A BEM-based inverse algorithm to retrieve multi-dimensional heat transfer coefficients from transient temperature measurements. In Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99, (pp. 65-74).

Lin, Y.L., Shih, T.I.P., & Chyu, M.K. (1999). Computations of Flow and Heat Transfer in a Channel With Rows of Hemispherical Cavities. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a081).ASME International. doi: 10.1115/99-gt-263.

Shih, T.I.P., Lin, Y.L., Chyu, M.K., & Gogineni, S. (1999). Computations of Film Cooling From Holes With Struts. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a085).ASME International. doi: 10.1115/99-gt-282.

Yu, Y., Yen, C.H., Shih, T.I.P., Chyu, M.K., & Gogineni, S. (1999). Film Cooling Effectiveness and Heat Transfer Coefficient Distributions Around Diffusion Shaped Holes. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t01a008).ASME International. doi: 10.1115/99-gt-034.

Chyu, M.K., Hsing, Y.C., & Bunker, R.S. (1998). Measurements of Heat Transfer Characteristics of Gap Leakage Around a Misaligned Component Interface. In Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration, 4, (p. v004t09a025).ASME International. doi: 10.1115/98-gt-132.

Chyu, M.K., Hsing, Y.C., & Bunker, R.S. (1998). Measurements of heat transfer characteristics of gap leakage around a misaligned component interface. In American Society of Mechanical Engineers (Paper), (GT).

Chyu, M.K., Hsing, Y.C., & Natarajan, V. (1998). Convective heat transfer of cubic fin arrays in a narrow channel. In JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 120(2), (pp. 362-367).ASME International. doi: 10.1115/1.2841414.

Chyu, M.K., Hsing, Y.C., Shih, T.I.P., & Natarajan, V. (1998). Heat transfer contributions of pins and endwall in pin-fin arrays: Effects of thermal boundary condition modeling. In American Society of Mechanical Engineers (Paper), (GT).

Chyu, M.K., Yen, C.H., & Shih, T.I.P. (1998). Effects of bulk flow pulsation on film cooling. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-3, (pp. 441-449).

Lin, Y.L., Chyu, M.K., Shih, T.I.P., Willis, B.P., & Hwang, D.P. (1998). Skin-friction reduction through micro blowing. In 36th AIAA Aerospace Sciences Meeting and Exhibit.

Shih, T.I.P., Lin, Y.L., Stephens, M.A., Chyu, M.K., & Civinskas, K.C. (1998). Flow and Heat Transfer in a Ribbed U-Duct Under Typical Engine Conditions. In Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration, 4, (p. v004t09a054).ASME International. doi: 10.1115/98-gt-213.

Shih, T.I.P., Lin, Y.L., Stephens, M.A., Chyu, M.K., & Civinskas, K.C. (1998). Flow and heat transfer in a ribbed U-duct under typical engine conditions. In American Society of Mechanical Engineers (Paper), (GT).

Chyu, M.K., Ding, H., Downs, J.P., Van Sutendael, A., & Soechting, F.O. (1997). Determination of Local Heat Transfer Coefficient Based on Bulk Mean Temperature Using a Transient Liquid Crystals Technique. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t09a085).ASME International. doi: 10.1115/97-gt-489.

Chyu, M.K., Ding, H., Downs, J.P., Van Sutendael, A., & Soechting, F.O. (1997). Determination of local heat transfer coefficient based on bulk mean temperature using a transient liquid crystals technique. In American Society of Mechanical Engineers (Paper).

Chyu, M.K., Yu, Y., Ding, H., Downs, J.P., & Soechting, F.O. (1997). Concavity Enhanced Heat Transfer in an Internal Cooling Passage. In Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration, 3, (p. v003t09a080).ASME International. doi: 10.1115/97-gt-437.

Chyu, M.K., Yu, Y., Ding, H., Downs, J.P., & Soechting, F.O. (1997). Concavity enhanced heat transfer in an internal cooling passage. In American Society of Mechanical Engineers (Paper).

Chyu, M.K., & Hsing, Y.C. (1996). Effects of inserting arm blockage on heat transfer in a corotating disk assembly. In American Society of Mechanical Engineers, Information Storage and Processing Division, ISPS, 2, (pp. 205-211).

Chyu, M.K., & Hsing, Y.C. (1996). Use of a Thermographic Phosphor Fluorescence Imaging System for Simultaneous Measurement of Film Cooling Effectiveness and Heat Transfer Coefficient. In American Society of Mechanical Engineers (Paper), (p. v002t02a009).ASME International. doi: 10.1115/96-gt-430.

Chyu, M.K., & Hsing, Y.C. (1996). Use of a Thermographic Phosphor Fluorescence Imaging System for Simultaneous Measurement of Film Cooling Effectiveness and Heat Transfer Coefficient. In Volume 2: Aircraft Engine; Marine; Microturbines and Small Turbomachinery.American Society of Mechanical Engineers. doi: 10.1115/96-gt-430.

Chyu, M.K., Hsing, Y., Natarajan, V., & Chiou, J.S. (1996). Effects of perpendicular flow entry on convective heat(mass) transfer from pin-fin arrays. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 329, (pp. 45-52).

Chyu, M.K., Hsing, Y.C., & Natarajan, V. (1996). Convective heat transfer of cubic fin arrays in a narrow channel. In American Society of Mechanical Engineers (Paper).

Stephens, M.A., Chyu, M.K., & Shih, T.L.P. (1996). Calculations and measurements of heat transfer in a square duct with inclined ribs. In 32nd Joint Propulsion Conference and Exhibit.

Stephens, M.A., Chyu, M.K., Shih, T.I.P., & Civinskas, K.C. (1996). Computation of convective heat transfer in a square duct with inclined ribs of rounded cross section. In American Society of Mechanical Engineers (Paper).

Yu, Y., & Chyu, M.K. (1996). Influence of a leaking gap downstream of the injection holes on film cooling performance. In American Society of Mechanical Engineers (Paper).

Chyu, M.K., & Natarajan, V. (1995). Darryl E. Metzger Memorial Session Paper: Surface Heat Transfer From a Three-Pass Blade Cooling Passage Simulator. In Journal of Turbomachinery, 117(4), (pp. 650-656).ASME International. doi: 10.1115/1.2836584.

Chyu, M.K., & Natarajan, V. (1994). Surface heat transfer from a three-pass blade cooling passage simulator. In American Society of Mechanical Engineers (Paper), (pp. 1-9).

NATARAJAN, V., & CHYU, M.K. (1994). EFFECT OF FLOW ANGLE-OF-ATTACK ON THE LOCAL HEAT MASS-TRANSFER FROM A WALL-MOUNTED CUBE. In JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 116(3), (pp. 552-560).ASME International. doi: 10.1115/1.2910906.

Asako, Y., Yamaguchi, Y., Nabana, K., & Chyu, M.K. (1993). Combined effects of rotation and skew angle on convective heat transfer in a two-pass passage with a 180-degree turn. In American Society of Mechanical Engineers (Paper), (pp. 1-7).

Chyu, M.K., & Bizzak, D.J. (1993). Measurement of Surface Temperature Using a Laser-Induced Fluorescence Thermal Imaging System. In Volume 3A: General, 3A, (p. v03at15a065).ASME International. doi: 10.1115/93-gt-214.

Chyu, M.K., & Bizzak, D.J. (1993). Measurement of surface temperature using a laser-induced fluorescence thermal imaging system. In American Society of Mechanical Engineers (Paper).

Natarajan, V., & Chyu, M.K. (1993). Surface heat transfer of two cubes in tandem arrangement. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 246, (pp. 85-96).

Chyu, M.K., & Bizzak, D.J. (1991). Combined Effects of Axial- and Radial-Gap Spacing on the Mass Transfer Characteristics of a Shrouded Rotor-Stator System. In Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration, 4, (p. v004t09a024).ASME International. doi: 10.1115/91-gt-347.

Chyu, M.K., & Bizzak, D.J. (1991). Combined effects of axial- and radial-gap spacing on the mass transfer characteristics of a shrouded rotor-stator system. In American Society of Mechanical Engineers (Paper).

Jiang, Y., Chen, C.P., & Chyu, M.K. (1990). A numerical computation of convective heat transfer in two-pass rectangular ducts with a 180-degree sharp turn. In 28th Aerospace Sciences Meeting, 1990.

Chyu, M.K. (1989). Heat Transfer and Pressure Drop for Short Pin-Fin Arrays With Pin-Endwall Fillet. In Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration, 4, (p. v004t08a011).ASME International. doi: 10.1115/89-gt-99.

Chyu, M.K. (1989). Regional heat transfer and pressure drop in two-pass and three-pass flow passages with 180-degree sharp turns. In American Society of Mechanical Engineers (Paper).

Chyu, M.K., & Natarajan, V. (1989). Local heat transfer on a flat surface roughened with broken ribs. In American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 120, (pp. 25-31).

Chyu, M.K., Wu, L.X., & Murthy, J.Y. (1988). Forced convection heat transfer of a vertical shrouded fin array. (p. 86).

Chyu, M.K., Metzger, D.E., & Hwan, C.L. (1987). Heat transfer in shrouded rectangular cavities. In Journal of Thermophysics and Heat Transfer, 1(3), (pp. 247-252).American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.35.

Murthy, J.Y., & Chyu, M.K. (1987). NUMERICAL STUDY OF LAMINAR FLOW AND HEAT TRANSFER IN A CHANNEL WITH A 180-DEGREE BEND. In American Society of Mechanical Engineers (Paper).

CHYU, M., METZGER, D., & HWAN, C. (1986). Heat transfer in shrouded rectangular cavities. In 4th Thermophysics and Heat Transfer Conference.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1986-1327.

Chyu, M.K., & Goldstein, R.J. (1986). LOCAL MASS TRANSFER IN RECTANGULAR CAVITIES WITH SEPARATED TURBULENT FLOW. In International Heat Transfer Conference 16, 3, (pp. 1065-1070).Begell House. doi: 10.1615/ihtc8.520.

Metzger, D.E., & Chyu, M.K. (1986). CLEARANCE EFFECTS ON HEAT TRANSFER AT THE TIPS OF PLAIN AND GROOVED TURBINE AIRFOILS. In American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 37, (pp. 107-113).