(2014) Association for Iron and Steel Rolls Technology Best Paper Award.
(2011) University of Pittsburgh Innovator Award.
(2011) Visiting Committee Educator Award, MEMS Department.
(2007) Elected Fellow of ASME.
(2006) School of Engineering Beitle-Veltri Memorial Teaching Award.
(2005) Engineering Faculty Honor Roll.
(2003) Letter of commendation from the Chancellor of the University, for chairing ASME-Pittsburgh.
(2001) Who's Who in Engineering, Pittsburgh Business Times.
(2000) Letter of commendation from the Vice Chancellor of Student Affairs for Positively Impacting Student.
(1999 - 2001) Leighton E. and Mary N. Orr Faculty Fellowship, Univ. of Pittsburgh.
(1992) Paul Torgersen Research Excellence Award, Virginia Tech: Voted best Master of Science project for the year.
(1991) Student Paper Award, Acoustical Society of America: Voted second best student paper in structural acoustics for the conference.
(1989) Frank O'Bell Academic Scholarship.
(1989) Lucille Seay Academic Scholarship.
Ph.D., Mechanical Engineering, Duke University
M.S., Mechanical Engineering, Virginia Tech
B.S., Mechanical Engineering, Virginia Tech
Li, Q., & Vipperman, J.S. (2019). Two-Dimensional Arbitrarily Shaped Acoustic Cloaks With Triangular Patterns of Homogeneous Properties. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 141(2).ASME International. doi: 10.1115/1.4041897.
Li, Q., & Vipperman, J.S. (2019). Three-dimensional pentamode acoustic metamaterials with hexagonal unit cells. J Acoust Soc Am, 145(3), 1372.Acoustical Society of America (ASA). doi: 10.1121/1.5093622.
Li, Q., & Vipperman, J.S. (2018). Non-singular three-dimensional arbitrarily shaped acoustic cloaks composed of homogeneous parts. JOURNAL OF APPLIED PHYSICS, 124(3), 035103.AIP Publishing. doi: 10.1063/1.5028136.
Schimoler, P.J., Vipperman, J.S., & Miller, M.C. (2018). Pole/Zero Design of Agonist/Antagonist Actuation. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 26(6), 2141-2148.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/TCST.2017.2740852.
Li, Q., & Vipperman, J.S. (2017). Two-dimensional arbitrarily shaped acoustic cloaks composed of homogeneous parts. JOURNAL OF APPLIED PHYSICS, 122(14), 144902.AIP Publishing. doi: 10.1063/1.4990758.
Hua, M., Wang, Q., Li, C., Vipperman, J.S., & DeArdo, A.J. (2016). Plastic deformation behavior of weld lines in ERW steel pipe. Iron and Steel Technology, 13(10), 144-151.
Li, Q., & Vipperman, J.S. (2014). Two-dimensional acoustic cloaks of arbitrary shape with layered structure based on transformation acoustics. APPLIED PHYSICS LETTERS, 105(10), 101906.AIP Publishing. doi: 10.1063/1.4895765.
Qi, L., & Vipperman, J.S. (2014). Two-dimensional acoustic cloaks of arbitrary shape with layered structure based on transformation acoustics. Applied Physics Letters, 105(101906).
Wang, C., Pahk, J.B., Balaban, C.D., Miller, M.C., Wood, A.R., & Vipperman, J.S. (2014). Computational study of human head response to primary blast waves of five levels from three directions. In Gefen, A. (Ed.). PLoS One, 9(11), e113264.Public Library of Science (PLoS). doi: 10.1371/journal.pone.0113264.
Bucci, B.A., Cole, D.G., Ludwick, S.J., & Vipperman, J.S. (2013). Nonlinear Control Algorithm for Improving Settling Time in Systems With Friction. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 21(4), 1365-1373.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/TCST.2012.2206812.
Bucci, B.A., Vipperman, J.S., Cole, D.G., & Ludwick, S.J. (2013). Evaluation of a servo settling algorithm. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(1), 10-22.Elsevier. doi: 10.1016/j.precisioneng.2012.04.006.
Redkin, K.V., Vipperman, J.S., Hrizo, C., Schleiden, R., & Garcia, C.I. (2013). Multi-scale Finite-Element Modeling and Microstructural Evaluation of Centrifugally Cast High-Speed Steel Finishing Rolls. Iron and Steel Technology (AISTech) Journal, 10(10), 69-84.
Ryan, T., & Vipperman, J.S. (2013). Incorporation of scheduling and adaptive historical data in the Sensor-Utility-Network method for occupancy estimation. ENERGY AND BUILDINGS, 61, 88-92.Elsevier. doi: 10.1016/j.enbuild.2013.01.037.
Bucci, B., Cole, D., Ludwick, S., & Vipperman, J.S. (2012). A Nonlinear Control Algorithm for Reducing Settling Time in High-Precision Point to Point Motion. IEEE Transactions on Control System Technology, (99).
Cvengros, R.M., Valente, D., Nykaza, E.T., & Vipperman, J.S. (2012). Blast noise classification with common sound level meter metrics. J Acoust Soc Am, 132(2), 822-831.Acoustical Society of America (ASA). doi: 10.1121/1.4730921.
Vipperman, J.S., Rhudy, M.A., & Bucci, B.A. (2010). Development and Implementation of Metrics for Identifying Military Impulse Noise. Defense Technical Information Center. doi: 10.21236/ada546819.
Zink, F., Vipperman, J., & Schaefer, L. (2010). CFD simulation of a thermoacoustic engine with coiled resonator. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 37(3), 226-229.Elsevier. doi: 10.1016/j.icheatmasstransfer.2009.09.001.
Zink, F., Vipperman, J., & Schaefer, L. (2010). CFD simulation of thermoacoustic cooling. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(19-20), 3940-3946.Elsevier. doi: 10.1016/j.ijheatmasstransfer.2010.05.012.
Zink, F., Vipperman, J.S., & Schaeferc, L.A. (2010). Environmental motivation to switch to thermoacoustic refrigeration. APPLIED THERMAL ENGINEERING, 30(2-3), 119-126.Elsevier. doi: 10.1016/j.applthermaleng.2009.07.008.
El-Kurdi, M.S., Vipperman, J.S., & Vorp, D.A. (2009). Design and Subspace System Identification of an Ex Vivo Vascular Perfusion System. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 131(4), 041012.ASME International. doi: 10.1115/1.3072895.
El-Kurdi, M.S., Vipperman, J.S., & Vorp, D.A. (2009). Design and subspace system identification of an ex vivo vascular perfusion system. J Biomech Eng, 131(4), 041012. doi: 10.1115/1.3072895.
Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., & Miller, M.C. (2009). Validation of a feedback-controlled elbow simulator design: Elbow muscle moment arm measurement. Journal of Medical Devices, Transactions of the ASME, 3(3), 031002.ASME International. doi: 10.1115/1.3191725.
Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., & Miller, M.C. (2009). Effects of camera switching on fine accuracy in a motion capture system. J Biomech Eng, 131(1), 014502.ASME International. doi: 10.1115/1.3002910.
Rizzo, P., Bordoni, G., Marzani, A., & Vipperman, J. (2009). Localization of sound sources by means of unidirectional microphones. MEASUREMENT SCIENCE AND TECHNOLOGY, 20(5), 055202.IOP Publishing. doi: 10.1088/0957-0233/20/5/055202.
El-Kurdi, M.S., Vipperman, J.S., & Vorp, D.A. (2008). Control of circumferential wall stress and luminal shear stress within intact vascular segments perfused ex vivo. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 130(5), 051003.ASME International. doi: 10.1115/1.2948419.
El-Kurdi, M.S., Vipperman, J.S., & Vorp, D.A. (2008). Control of circumferential wall stress and luminal shear stress within intact vascular segments perfused ex vivo. J Biomech Eng, 130(5), 051003. doi: 10.1115/1.2948419.
Bucci, B.A., & Vipperman, J.S. (2007). Performance of artificial neural network-based classifiers to identify military impulse noise. J Acoust Soc Am, 122(3), 1602.Acoustical Society of America (ASA). doi: 10.1121/1.2756969.
Hensel, J.P., Gemmen, R.S., Thornton, J.D., Vipperman, J.S., Clark, W.W., & Bucci, B.A. (2007). Effects of cell-to-cell fuel mal-distribution on fuel cell performance and a means to reduce mal-distribution using MEMS micro-valves. JOURNAL OF POWER SOURCES, 164(1), 115-125.Elsevier. doi: 10.1016/j.jpowsour.2006.09.049.
Li, D., Cheng, L., Yu, G.H., & Vipperman, J.S. (2007). Noise control in enclosures: modeling and experiments with T-shaped acoustic resonators. J Acoust Soc Am, 122(5), 2615-2625.Acoustical Society of America (ASA). doi: 10.1121/1.2783122.
Vipperman, J.S., Bauer, A.J., & Babich, D.R. (2007). Survey of Noise in Coal Preparation Plants. Journal of the Acoustical Society of America, 121(1), 206-212.
Vipperman, J.S., Bauer, E.R., & Babich, D.R. (2007). Survey of noise in coal preparation plants. J Acoust Soc Am, 121(1), 197-205.Acoustical Society of America (ASA). doi: 10.1121/1.2372587.
Vipperman, J.S., Hensel, J.P., Gemmen, R.S., Hetzer, B.J., Thorton, J.D., Clark, W.W., & Bucci, B.A. (2007). Effects of Cell-to-Cell Fuel Mal-Distribution on Fuel Cell Performance. Journal of Power Sources, 164(1), 115-125.
Li, D., & Vipperman, J.S. (2006). Noise control of mock-scale ChamberCore payload fairing using integrated acoustic resonators. JOURNAL OF SPACECRAFT AND ROCKETS, 43(4), 877-882.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/1.16331.
Vipperman, J.S., Bisnette, J., Smith, A.K., & Budny, D.B. (2006). Active Noise Control Using Phase-Compensated, Damped Resonant Filters. ASME Journal of Vibration and Acoustics, 128(2), 148-155.
Haljasmaa, I.V., Vipperman, J.S., Lynn, R.J., & Warzinski, R.P. (2005). Control of a fluid particle under simulated deep-ocean conditions in a high-pressure water tunnel. REVIEW OF SCIENTIFIC INSTRUMENTS, 76(2), 025111.AIP Publishing. doi: 10.1063/1.1854216.
Li, D., & Vipperman, J.S. (2005). Mathematical model for characterizing noise transmission into finite cylindrical structures. J Acoust Soc Am, 117(2), 679-689.Acoustical Society of America (ASA). doi: 10.1121/1.1828652.
Li, D.Y., & Vipperman, J.S. (2005). On the noise transmission and control for a cylindrical chamber core composite structure. JOURNAL OF SOUND AND VIBRATION, 288(1-2), 235-254.Elsevier. doi: 10.1016/j.jsv.2005.01.007.
Li, D., & Vipperman, J.S. (2004). On the design of long T-shaped acoustic resonators. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 116(5), 2785-2792.Acoustical Society of America (ASA). doi: 10.1121/1.1795336.
Vipperman, J.S., Li, D.Y., Avdeev, I., & Lane, S.A. (2003). Investigation of the sound transmission into an advanced grid-stiffened structure. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 125(3), 257-266.ASME International. doi: 10.1115/1.1569511.
Vipperman, J.S., & Bauer, E.R. (2002). Dragline noise survey. The Journal of the Acoustical Society of America, 111(5), 2336.Acoustical Society of America (ASA). doi: 10.1121/1.4777809.
Cabell, R., Palumbo, D., & Vipperman, J. (2001). A principal component feedforward algorithm for active noise control: Flight test results. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 9(1), 76-83.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/87.896748.
Vipperman, J.S. (2001). Simultaneous Qualitative Health Monitoring and Sensoriactuation. AIAA Journal, 39(9), 1822-1825.
Vipperman, J.S. (2001). Simultaneous qualitative health monitoring and adaptive piezoelectric sensoriactuation. AIAA JOURNAL, 39(9), 1822-1825.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/2.1520.
Vipperman, J.S. (2001). Simultaneous qualitative health monitoring and adaptive piezoelectric sensoriactuation. AIAA Journal, 39, 2001-1822.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.14938.
Gibbs, G.P., Clark, R.L., Cox, D.E., & Vipperman, J.S. (2000). Radiation modal expansion: application to active structural acoustic control. J Acoust Soc Am, 107(1), 332-339.Acoustical Society of America (ASA). doi: 10.1121/1.428307.
Cox, D.E., Gibbs, G.P., Clark, R.L., & Vipperman, J.S. (1999). Experimental robust control of structural acoustic radiation. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 121(4), 433-439.ASME International. doi: 10.1115/1.2893999.
Vipperman, J.S., & Clark, R.L. (1999). Implications of using colocated strain-based transducers for output active structural acoustic control. J Acoust Soc Am, 106(3 Pt 1), 1392-1399.Acoustical Society of America (ASA). doi: 10.1121/1.427142.
Vipperman, J.S., & Clark, R.L. (1999). Multivariable feedback active structural acoustic control using adaptive piezoelectric sensoriactuators. J Acoust Soc Am, 105(1), 219-225.Acoustical Society of America (ASA). doi: 10.1121/1.424599.
Vipperman, J.S., Barker, J.M., Clark, R.L., & Balas, G.J. (1999). Comparison of μ- and H2-synthesis controllers on an experimental typical section. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 22(2), 278-285.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/2.4375.
Vipperman, J.S., Clark, R.L., Conner, M., & Dowell, E.H. (1998). Experimental active control of a typical section using a trailing-edge flap. JOURNAL OF AIRCRAFT, 35(2), 224-229.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/2.2312.
Vipperman, J., Clark, R., Conner, M., Dowell, E.Vipperman, J., Clark, R., Conner, M., Dowell, E. (1997). Investigation of the experimental active control of a typical section airfoil using a trailing edge flap. 38th Structures, Structural Dynamics, and Materials Conference, 35(2), 224-229.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1997-1078.
Vipperman, J.S., & Clark, R.L. (1996). Hybrid model-insensitive control using a piezoelectric sensoriactuator. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 7(6), 689-695.SAGE Publications. doi: 10.1177/1045389X9600700608.
Vipperman, J.S., & Clark, R.L. (1996). Implementation of an adaptive piezoelectric sensoriactuator. AIAA JOURNAL, 34(10), 2102-2109.American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/3.13358.
VIPPERMAN, J.S., & BURDISSO, R.A. (1995). ADAPTIVE FEEDFORWARD CONTROL OF NONMINIMUM-PHASE STRUCTURAL SYSTEMS. JOURNAL OF SOUND AND VIBRATION, 183(3), 369-382.Elsevier. doi: 10.1006/jsvi.1995.0260.
BURDISSO, R.A., VIPPERMAN, J.S., & FULLER, C.R. (1993). CAUSALITY ANALYSIS OF FEEDFORWARD-CONTROLLED SYSTEMS WITH BROAD-BAND INPUTS. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 94(1), 234-242.Acoustical Society of America (ASA). doi: 10.1121/1.407081.
Vipperman, J.S., Burdisso, R.A., & Fuller, C.R. (1993). Causality Analysis of Feedforward Controlled Systems. Journal of Acoustical Society of America, 94(1), 234-242.
VIPPERMAN, J.S., BURDISSO, R.A., & FULLER, C.R. (1993). ACTIVE CONTROL OF BROAD-BAND STRUCTURAL VIBRATION USING THE LMS ADAPTIVE ALGORITHM. JOURNAL OF SOUND AND VIBRATION, 166(2), 283-299.Elsevier. doi: 10.1006/jsvi.1993.1297.
Vipperman, J.S., Dumm, C., Carvajal, J., Runane, A., Walter, M., Czerniak, L., & Heibel, M. Predictive Modeling of Acoustic Signals from Thermoacoustic Power Sensios (Taps).
Vipperman, J.S., Robert, C., & David, C. Robust Multivariable Active Control with Sensoriactuator Feedthrough.
Maupin, D.B., Dumm, C.M., Klinzing, G.E., Balaban, C.D., & Vipperman, J.S. (2023). Design and Realization of Microscopic Optical Acoustic Sensors. In Volume 1: Acoustics, Vibration, and Phononics.ASME International. doi: 10.1115/imece2023-113926.
Dumm, C.M., Hiers, A.C., Vipperman, J.S., Klinzing, G.E., & Balaban, C.D. (2020). Ultrasonic Acoustic Heterodyne Transmission Into the Human Auditory and Vestibular Systems. In Volume 1: Acoustics, Vibration, and Phononics, 1.ASME International. doi: 10.1115/imece2020-24213.
Abayomi-Alli, A., Abayomi-Alli, O., Vipperman, J., Odusami, M., & Misra, S. (2019). Multi-class Classification of Impulse and Non-impulse Sounds Using Deep Convolutional Neural Network (DCNN). In Lecture Notes in Computer Science, 11623, (pp. 359-371).Springer Nature. doi: 10.1007/978-3-030-24308-1_30.
Saltsman, B., Balaban, C., & Vipperman, J.S. (2018). Computational modeling of coagulopathy for decision support. In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 3. doi: 10.1115/IMECE201887683.
Saltsman, B., Balaban, C., & Vipperman, J.S. (2018). Computational Modeling of Coagulopathy for Decision Support. In Volume 3: Biomedical and Biotechnology Engineering, (p. v003t04a053).ASME International. doi: 10.1115/imece2018-87683.
Dumm, C.M., Vipperman, J.S., Carvajal, J.V., Walter, M.M., Czerniak, L., Ruane, A.S., Ferroni, P., & Heibel, M.D. (2016). Predictive Modeling of Acoustic Signals From Thermoacoustic Power Sensors (TAPS). In Volume 1: Operations and Maintenance, Aging Management and Plant Upgrades; Nuclear Fuel, Fuel Cycle, Reactor Physics and Transport Theory; Plant Systems, Structures, Components and Materials; I&C, Digital Controls, and Influence of Human Factors, 1, (p. v001t04a019).ASME International. doi: 10.1115/icone24-61034.
He, Y., & Vipperman, J.S. (2016). Experimental Study of the Transmission Spectrum of a Sonic/Ultrasonic Acoustic Metamaterial. In Volume 13: Acoustics, Vibration, and Wave Propagation, 13, (p. v013t01a023).ASME International. doi: 10.1115/imece2016-67140.
Hua, M., Wang, Q., Li, C., Vipperman, J.S., & Deardo, A.J. (2016). Plastic deformation behavior of weld lines in ERW steel pipe. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 2327-2335).
Ryan, T.S., Ludwick, S.J., & Vipperman, J.S. (2016). Toward a modeling framework for linear stages. In Proceedings - ASPE 2016 Annual Meeting, (pp. 234-239).
Li, Q., & Vipperman, J.S. (2015). Two-Dimensional arbitrary shape acoustic cloaks composed of homogeneous parts realized by layered structures. In INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering.
Li, Q., & Vipperman, J.S. (2015). Two-dimensional arbitrary shape acoustic cloaks composed of homogeneous parts realized by layered structures. In American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCAD, 2015-January. doi: 10.1115/NCAD20155924.
Mang, S., & Vipperman, J.S. (2013). Comparison of Muffler Performance Criteria Using Finite Element Analysis and Field Measurements. In Volume 14: Vibration, Acoustics and Wave Propagation, 14, (p. v014t15a039).ASME International. doi: 10.1115/imece2013-64690.
Redkin, K.V., Vipperman, J.S., Hnzo, C., Schleiden, R., & Garcia, C.I. (2013). Multiscale finite element modeling and microstructural evaluation of centrifugally cast high-speed steel finishing rolls. In Iron and Steel Technology, 10(10), (pp. 69-84).
Redkin, K.V., Vipperman, J.S., Hrizo, C., Schleiden, R., & Garcia, C.I. (2013). Multi-scale finite element modeling and microstructural evaluation of centrifugally cast high-speed steel finishing rolls. In AISTech - Iron and Steel Technology Conference Proceedings, 2, (pp. 1985-2000).
Shelton, C.M., Vipperman, J.S., Nykaza, E.T., & Valente, D. (2012). Six Noise Type Military Sound Classifier. In ASME 2012 Noise Control and Acoustics Division Conference, (pp. 127-136).ASME International. doi: 10.1115/ncad2012-0326.
Shelton, C.M., Vipperman, J.S., Nykaza, E.T., & Valente, D. (2012). SIX noise type military sound classifier. In 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 1, (pp. 87-96).
Wang, C., Pahk, J.B., Balaban, C.D., Muthu, J., Vorp, D.A., Miller, M.C., & Vipperman, J.S. (2012). Biomechanical Assessment of the Bridging Vein Rupture of Blast-Induced Traumatic Brain Injury Using the Finite Element Human Head Model. In Volume 2: Biomedical and Biotechnology, 2, (pp. 795-805).ASME International. doi: 10.1115/imece2012-88739.
Kirsch, N.A., Cole, D.G., Vipperman, J.S., & Ludwick, S.J. (2011). Characterization of periodic disturbances in rolling element bearings using an optical sensor. In Proceedings - ASPE 2011 Annual Meeting, 52, (pp. 165-168).
Wang, C., Pahk, J.B., Balaban, C.D., & Vipperman, J.S. (2011). Computational Study on the Bridging Vein Rupture of Blast-Induced Traumatic Brain Injury Using a Numerical Human Head Model. In Volume 2: Biomedical and Biotechnology Engineering; Nanoengineering for Medicine and Biology, 2, (pp. 111-120).ASME International. doi: 10.1115/imece2011-65733.
Bucci, B.A., Cole, D.G., Vipperman, J.S., & Ludwick, S.J. (2010). Practical friction compensation for ultra precision point-to-point motion. In Proceedings - ASPE 2010 Annual Meeting, 50, (pp. 109-112).
Ryan, T., Schaefer, L.A., & Vipperman, J.S. (2010). Control of a Standing-Wave Thermoacoustic Refrigerator. In Volume 13: Sound, Vibration and Design, 13, (pp. 283-289).ASME International. doi: 10.1115/imece2010-38966.
Bucci, B.A., Cole, D.G., Vipperman, J.S., & Ludwick, S.J. (2009). Friction modeling of linear rolling element bearings in high precision linear stages. In Proceedings of the 24th Annual Meeting of the American Society for Precision Engineering, ASPE 2009.
Li, D., Vipperman, J.S., & Li, C. (2009). Noise control in a small enclosure using t-shaped acoustic resonators. In 2008 Proceedings of the NoiseCon/ASME NCAD, NCAD 2008, (pp. 207-214).
Rhudy, M., Bucci, B., Vipperman, J., Allanach, J., & Abraham, B. (2009). Microphone Array Analysis Methods Using Cross-Correlations. In Volume 15: Sound, Vibration and Design, 15, (pp. 281-288).ASME International. doi: 10.1115/imece2009-10798.
Schimoler, P.J., Vipperman, J.S., Kuxhaus, L., Budny, D.D., Flamm, A.M., Baratz, M.E., & Miller, M.C. (2009). Accuracy and precision of a control system for an elbow joint simulator. In Proceedings of the ASME Summer Bioengineering Conference, SBC2008, (PART A), (pp. 5-6).
Zink, F., Vipperman, J.S., & Schaefer, L.A. (2009). Influence of the Thermal Properties of the Driving Components on the Performance of a Thermoacoustic Engine. In Volume 6: Emerging Technologies: Alternative Energy Systems; Energy Systems: Analysis, Thermodynamics and Sustainability, 6, (pp. 115-122).ASME International. doi: 10.1115/imece2009-11325.
Zink, F., Vipperman, J.S., & Schaefer, L.A. (2009). Heat Transfer Analysis in Thermoacoustic Regenerators Using CFD Simulation. In Volume 2: Theory and Fundamental Research; Aerospace Heat Transfer; Gas Turbine Heat Transfer; Computational Heat Transfer, 2, (pp. 769-777).ASME International. doi: 10.1115/ht2009-88215.
Bucci, B., & Vipperman, J. (2008). An Investigation of the Characteristics of a Bayesian Military Impulse Noise Classifier. In 2008 Proceedings of the NoiseCon/ASME NCAD, NCAD 2008, (pp. 215-224).ASME International. doi: 10.1115/ncad2008-73046.
Bucci, B., & Vipperman, J. (2008). An Investigation of the Characteristics of a Bayesian Military Impulse Noise Classifier. In ASME 2008 Noise Control and Acoustics Division Conference, (pp. 215-224).ASMEDC. doi: 10.1115/ncad2008-73046.
Bucci, B., Vipperman, J., & El-Jaroudi, A. (2008). Bayesian military impulse noise classifer. In ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART A, (pp. 7-11).
Li, D., Vipperman, J.S., & Cheng, L. (2008). Noise Control in a Small Enclosure Using T-Shaped Acoustic Resonators. In ASME 2008 Noise Control and Acoustics Division Conference, (pp. 207-214).ASME International. doi: 10.1115/ncad2008-73034.
Luo, A.C.J., Balachandran, B., Bin, Y., & Vipperman, J. (2008). Mechanical systems and control. In ASME International Mechanical Engineering Congress and Exposition, Proceedings, 9 PART A, (p. 1).
Zink, F., Vipperman, J.S., & Schaefer, L.A. (2008). Advancing Thermoacoustics Through CFD Simulation Using Fluent. In Volume 8: Energy Systems: Analysis, Thermodynamics and Sustainability; Sustainable Products and Processes, 8, (pp. 101-110).ASME International. doi: 10.1115/imece2008-66510.
Bucci, B., Vipperman, J., & El-Jaroudi, A. (2007). Bayesian Military Impulse Noise Classifier. In Volume 9: Mechanical Systems and Control, Parts A, B, and C, 9, (pp. 7-11).ASME International. doi: 10.1115/imece2007-41700.
Bucci, B.A., & Vipperman, J.S. (2007). Artificial neural network based temporal processing of waveforms to detect military impulse noise. In Institute of Noise Control Engineering of the USA - 22nd National Conference on Noise Control Engineering, NOISE-CON 2007, 1, (pp. 157-167).
DeJohn, D.W., & Vipperman, J.S. (2007). Development and Control of “Stiff Drivers” for Thermoacoustic Refrigeration. In Volume 9: Mechanical Systems and Control, Parts A, B, and C, 9 PART C, (pp. 1725-1730).ASME International. doi: 10.1115/imece2007-41586.
Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., Baratz, M.E., & Miller, M.C. (2007). Changes in Camera Visibility Affect Measured Marker Motion. ASME 2007 Summer Bioengineering Conference.Keystone Resort & Conference Center, Keystone, Colorado, USA. doi: 10.1115/sbc2007-176503.
Kuxhaus, L., Schimoler, P.J., Vipperman, J.S., Flamm, A.M., Budny, D., Baratz, M.E., DeMeo, P.J., & Miller, M.C. (2007). Measuring Moment Arms Using Closed-Loop Force Control With an Elbow Simulator. In ASME 2007 Summer Bioengineering Conference, (pp. 649-650).ASME International. doi: 10.1115/sbc2007-176513.
Schimoler, P.J., Vipperman, J.S., Kuxhaus, L., Flamm, A.M., Budny, D.D., Baratz, M.E., & Miller, M.C. (2007). Control System for an Elbow Joint Motion Simulator. In Volume 9: Mechanical Systems and Control, Parts A, B, and C, 9, (pp. 215-221).ASME International. doi: 10.1115/imece2007-42806.
Bisnette, J.B., Smith, A.K., Vipperman, J.S., & Budny, D.D. (2006). Active noise control using phase-compensated, damped resonant filters. In JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 128(2), (pp. 148-155).ASME International. doi: 10.1115/1.2149393.
Bucci, B., & Vipperman, J. (2006). Artificial Neural Network Military Impulse Noise Classifier. In Noise Control and Acoustics, (pp. 5-10).ASME International. doi: 10.1115/imece2006-14065.
Bucci, B.A., Vipperman, J.S., Clark, W., Hensel, J.P., Thornton, J., & Kim, S. (2006). Piezoelectric Microvalve for Flow Control in Polymer Electrolyte Fuel Cells. In Advanced Energy Systems, (pp. 329-335).ASME International. doi: 10.1115/imece2006-14064.
Rodgers, J.C., Clark, W.W., & Vipperman, J.S. (2005). Analysis and testing of a THUNDER piezoelectric actuator as a prime mover in a gas flow control valve. In Flatau, A.B. (Ed.). In Proceedings of SPIE--the International Society for Optical Engineering, 5764, (pp. 290-301).SPIE, the international society for optics and photonics. doi: 10.1117/12.599624.
Smith, A.K., Vipperman, J.S., & Budny, D.D. (2005). Adaptive Resonant Mode Acoustic Controller. In Noise Control and Acoustics, 32 NCA, (pp. 181-190).ASME International. doi: 10.1115/imece2005-79289.
El-Kurdi, M.S., Van Epps, J.S., Toth, R.J., Hamilton, D.W., Wu, C., Vipperman, J.S., & Vorp, D.A. (2004). Regulation of Cell Adhesion and De-Adhesion Proteins in Veins Perfused Under Arterial Conditions Ex-Vivo. In Advances in Bioengineering, (pp. 387-388).ASME International. doi: 10.1115/imece2004-61531.
Hensel, J.P., Gemmen, R.S., Hetzer, B.J., Thornton, J.D., Vipperman, J.S., Clark, W.W., & Ayhan, A.F. (2004). Fuel Cell Performance Improvements Using Cell-to-Cell Flow Distribution Control. In 2nd International Conference on Fuel Cell Science, Engineering and Technology, (pp. 283-290).ASME International. doi: 10.1115/fuelcell2004-2482.
Ayhan, F., Vipperman, J.S., Clark, W., Thornton, J., & Gemmen, R. (2003). Fabrication and Preliminary Testing of a Novel Piezoelectrically Actuated Microvalve. In Microelectromechanical Systems, 5, (pp. 385-391).ASME International. doi: 10.1115/imece2003-41482.
Bisnette, J.B., Vipperman, J.S., & Budny, D.D. (2003). Active Noise Control Using Phase-Compensated, Damped Resonant Filters. In Noise Control and Acoustics, 30, (pp. 169-179).ASME International. doi: 10.1115/imece2003-41831.
Li, D., & Vipperman, J.S. (2003). Noise Control of a Chamber Core Cylinder Using Cylindrical Helmholtz Resonators. In Noise Control and Acoustics, 30, (pp. 15-22).ASME International. doi: 10.1115/imece2003-41978.
Budny, D., Lund, L., Vipperman, J., & Patzer, J.L. (2002). Four Steps to Teaching C Programming. In 32nd Annual Frontiers in Education, 2, (p. f1g-18-f1g-22).Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/fie.2002.1158140.
Li, D., & Vipperman, J.S. (2002). Noise Transmission Control Studies on a Chamber Core Composite Cylinder. In Noise Control and Acoustics, (pp. 193-200).ASME International. doi: 10.1115/imece2002-33069.
Vipperman, J.S., Ayhan, A.F., Clark, W.W., Thornton, J.D., & Gemmen, R.S. (2002). A Novel Piezoelectrically Actuated Microvalve for Flow Control in a PEM Fuel Cell. In Microelectromechanical Systems, (pp. 497-505).ASME International. doi: 10.1115/imece2002-39320.
Vipperman, J.S., Li, D., & Avdeev, I. (2001). Investigation of the transmission loss behavior of an advanced grid-stiffened structure. In American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCA, 28(28), (pp. 367-374).
Clark, W.W., & Vipperman, J.S. (2000). Semi-active vibration suppression of an impulsively-excited machine on a flexible foundation. In Proceedings of SPIE - The International Society for Optical Engineering, 3989, (pp. 472-478).
Vipperman, J.S., & Li, D. (2000). Dielectric Response of Adaptive Piezoelectric Sensoriactuators. In American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 60, (pp. 499-507).ASME International. doi: 10.1115/imece2000-1741.
Vipperman, J.S., & Li, D. (2000). Dielectric Response of Adaptive Piezoelectric Sensoriactuators. In Adaptive Structures and Material Systems, 2000-A, (pp. 499-507).American Society of Mechanical Engineers. doi: 10.1115/imece2000-1741.
Vipperman, J. (1999). Novel autonomous structural health monitoring using piezoelectrics. In 40th Structures, Structural Dynamics, and Materials Conference and Exhibit, 4, (pp. 3107-3114).American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1999-1507.
Vipperman, J., Cox, D., & Clark, R. (1999). Robust multivariable active control with sensoriactuator feedthrough. In 40th Structures, Structural Dynamics, and Materials Conference and Exhibit, 4, (pp. 3115-3122).American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1999-1531.
Vipperman, J.S. (1999). Improved output active vibration control using large aperture strain transducers. In American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 59, (pp. 347-351).
Vipperman, J.S. (1999). Structural health monitoring applications using piezo-dielectric effects. In American Society of Mechanical Engineers, Aerospace Division (Publication) AD, 59, (pp. 397-401).
Cox, D.E., Gibbs, G.P., Clark, R.L., & Vipperman, J.S. (1998). Experimental robust control of structural acoustic radiation. In Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4, (pp. 3241-3249).
Vipperman, J.S., & Clark, R.L. (1997). Applications for the adaptive piezoelectric sensoriactuator. In Proceedings - National Conference on Noise Control Engineering, 2, (pp. 347-356).
Vipperman, J.S., Clark, R.L., Conner, M., & Dowell, E.H. (1997). Investigation of the experimental active control of a typical section airfoil using a trailing edge flap. In Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1, (pp. 180-189).
Vipperman, J., & Clark, R. (1996). Complex adaptive compensation of nonlinear piezoelectric sensoriactuators. In Adaptive Structures Forum, (pp. 1-11).American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1996-1266.
Vipperman, J., & Clark, R. (1995). Hybrid analog and digital adaptive compensation of piezoelectric sensoriactuators. In 36th Structures, Structural Dynamics and Materials Conference, 5, (pp. 2854-2859).American Institute of Aeronautics and Astronautics (AIAA). doi: 10.2514/6.1995-1098.
Bobick, T.G., & Rubin, M.N. (1984). NOISE CONTROL IN COAL PREPARATION PLANTS. In Information Circular - United States, Bureau of Mines, (pp. 120-129).