Wei Xiong

Research Associate, Department of Materials Science and Engineering, Northwestern University

Research Associate, Department of Materials Science & Engineering, University of Wisconsin-Madison

Ph.D., Department of Materials Science and Engineering, KTH Royal Institute of Technology

D.Eng., State Key Lab of Powder Metallurgy, Central South University

Exchange Researcher,Institute of Physical Chemistry, University of Vienna

Chen, L., Fu, Z., Chen, W., Chen, Z., Xiong, W., Zhu, D., & Lavernia, E.J. (2024). Enhancing mechanical properties and electrochemical behavior of equiatomic FeNiCoCr high-entropy alloy through sintering and hot isostatic pressing for binder jet 3D printing. ADDITIVE MANUFACTURING, 81, 103999.Elsevier. doi: 10.1016/j.addma.2024.103999.

Hao, L., Sridar, S., & Xiong, W. (2024). Thermodynamic optimization of KCl-LiCl-LaCl₃ with ionic two-sublattice model for liquid. JOURNAL OF MOLECULAR LIQUIDS, 400, 124516.Elsevier. doi: 10.1016/j.molliq.2024.124516.

Sargent, N., Firdosy, S., Wang, X., Ury, N., Poplawsky, J.D., Otis, R., & Xiong, W. (2024). Discovery of microsegregation-aided transformation and twinning-induced plasticity in low Mn steel through directed energy deposition of functionally graded materials. ADDITIVE MANUFACTURING, 85, 104154.Elsevier. doi: 10.1016/j.addma.2024.104154.

Sridar, S., Wang, Z., & Xiong, W. (2024). Laser powder bed fusion of high-strength low-alloy steels with post-heat treatment design for enhanced mechanical performance. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 895, 146210.Elsevier. doi: 10.1016/j.msea.2024.146210.

Tian, Z., Chen, W., Wang, H., Chu, C., Liu, J., Hao, L., Xiong, W., Guo, J., Jiao, Z., & Fu, Z. (2024). Microstructural evolution, mechanical behavior, and deformation mechanisms of a lightweight Ti-Nb-Cr-V refractory high-entropy alloy at room and elevated temperatures. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 910, 146883.Elsevier. doi: 10.1016/j.msea.2024.146883.

Wang, X., Pizano, L.F.L., Sridar, S., Sudbrack, C., & Xiong, W. (2024). Aging heat treatment design for Haynes 282 made by wire-feed additive manufacturing using high-throughput experiments and interpretable machine learning. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 25(1), 2346067.Taylor & Francis. doi: 10.1080/14686996.2024.2346067.

Zhao, Y., Shabani, M., Wang, L., & Xiong, W. (2024). Investigation on high cycle fatigue performance of additively manufactured Alloys: Synergistic effects of surface finishing and Post-Heat treatment. INTERNATIONAL JOURNAL OF FATIGUE, 185, 108356.Elsevier. doi: 10.1016/j.ijfatigue.2024.108356.

Meghwal, A., Singh, S., Sridar, S., Xiong, W., Hall, C., Munroe, P., Berndt, C.C., & Ang, A.S.M. (2023). Development of composite high entropy-medium entropy alloy coating. SCRIPTA MATERIALIA, 222, 115044.Elsevier. doi: 10.1016/j.scriptamat.2022.115044.

Sargent, N., Wang, Y., Li, D., Zhao, Y., Wang, X., & Xiong, W. (2023). Exploring Alloy Design Pathway Through Directed Energy Deposition of Powder Mixtures: A Study of Stainless Steel 316L and Inconel 718. ADDITIVE MANUFACTURING LETTERS, 6, 100133.Elsevier. doi: 10.1016/j.addlet.2023.100133.

Sridar, S., Hao, L., & Xiong, W. (2023). Thermodynamic modeling of KCl-PrCl3 and KCl-LiCl-PrCl3 systems. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 81, 102552.Elsevier. doi: 10.1016/j.calphad.2023.102552.

Sridar, S., Pizano, L.F.L., Klecka, M.A., & Xiong, W. (2023). Achieving High Strength and Creep Resistance in Inconel 740H Superalloy through Wire-Arc Additive Manufacturing and Thermodynamic-Guided Heat Treatment. MATERIALS, 16(19), 6388.MDPI. doi: 10.3390/ma16196388.

Stinehart, J., Pizano, L.F.L., Xiong, W., & Zhou, L. (2023). Creep property and microstructural evolution of laser powder bed fused binary Al-10Ce alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 885, 145631.Elsevier. doi: 10.1016/j.msea.2023.145631.

Ury, N., Neuberger, R., Sargent, N., Xiong, W., Arroyave, R., & Otis, R. (2023). Kawin: An open source Kampmann-Wagner Numerical (KWN) phase precipitation and coarsening model. ACTA MATERIALIA, 255, 118988.Elsevier. doi: 10.1016/j.actamat.2023.118988.

Xie, H., Liu, N., Zhang, Q., Zhong, H., Guo, L., Zhao, X., Li, D., Liu, S., Huang, Z., Lele, A.D., Brozena, A.H., Wang, X., Song, K., Chen, S., Yao, Y., Chi, M., Xiong, W., Rao, J., Zhao, M., Shneider, M.N., Luo, J., Zhao, J.C., Ju, Y., & Hu, L. (2023). A stable atmospheric-pressure plasma for extreme-temperature synthesis. NATURE, 623(7989), 964-+.Springer Nature. doi: 10.1038/s41586-023-06694-1.

Zhao, Y., & Xiong, W. (2023). Influence of Homogenization on Phase Transformations during Isothermal Aging of Inconel 718 Superalloys Fabricated by Additive Manufacturing and Suction Casting. MATERIALS, 16(14), 4968.MDPI. doi: 10.3390/ma16144968.

Chu, C., Hao, L., Chen, W., Xiong, W., Niu, J., & Fu, Z. (2022). Phase transformations and mechanical behavior in a non-equiatomic Ti₁₀Fe₃₀Co₃₀Ni₃₀ medium-entropy alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 832, 142429.Elsevier. doi: 10.1016/j.msea.2021.142429.

Kang, M., Jiang, M., Sridar, S., Xiong, W., Xie, Z., & Wang, J. (2022). Effect of Multiple Repair Welding on Crack Susceptibility and Mechanical Properties of Inconel 718 Alloy Casting. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 31(1), 254-261.Springer Nature. doi: 10.1007/s11665-021-06173-6.

Maivald, P., Sridar, S., & Xiong, W. (2022). Thermal Conductivity Determination of Ga-In Alloys for Thermal Interface Materials Design. THERMO, 2(1), 1-13.MDPI. doi: 10.3390/thermo2010001.

Sridar, S., Klecka, M.A., & Xiong, W. (2022). Interfacial characteristics of P91 steel-Inconel 740H bimetallic structure fabricated using wire-arc additive manufacturing. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 300, 117396.Elsevier. doi: 10.1016/j.jmatprotec.2021.117396.

Sridar, S., Sargent, N., Wang, X., Klecka, M.A., & Xiong, W. (2022). Determination of Location-Specific Solidification Cracking Susceptibility for a Mixed Dissimilar Alloy Processed by Wire-Arc Additive Manufacturing. METALS, 12(2), 284.MDPI. doi: 10.3390/met12020284.

Vallabh, C.K.P., Sridar, S., Xiong, W., & Zhao, X. (2022). Predicting melt pool depth and grain length using multiple signatures from in-situ single camera two-wavelength imaging pyrometry for laser powder bed fusion. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 308, 117724.Elsevier. doi: 10.1016/j.jmatprotec.2022.117724.

Vecchis, R.R.D., Wang, X., Sridar, S., Wang, Z., Pataky, G.J., & Xiong, W. (2022). Introducing Heusler intermetallics for synergic effect of grain refinement and precipitation strengthening in high-strength low-alloy steels. JOURNAL OF ALLOYS AND COMPOUNDS, 904, 163885.Elsevier. doi: 10.1016/j.jallcom.2022.163885.

Wang, X., De Vecchis, R.R., Li, C., Zhang, H., Hu, X., Sridar, S., Wang, Y., Chen, W., & Xiong, W. (2022). Design metastability in high-entropy alloys by tailoring unstable fault energies. SCIENCE ADVANCES, 8(36), eabo7333.American Association for the Advancement of Science (AAAS). doi: 10.1126/sciadv.abo7333.

Wang, X., Zhao, Y., Chen, G., Zhao, X., Liu, C., Sridar, S., Pizano, L.F.L., Li, S., Brozena, A.H., Guo, M., Zhang, H., Wang, Y., Xiong, W., & Hu, L. (2022). Ultrahigh-temperature melt printing of multi-principal element alloys. NATURE COMMUNICATIONS, 13(1), 6724.Springer Nature. doi: 10.1038/s41467-022-34471-7.

Wang, X., Zhao, Y., Chen, G., Zhao, X., Liu, C., Sridar, S., Pizano, L.F.L., Li, S., Brozena, A.H., Guo, M., Zhang, H., Wang, Y., Xiong, W., & Hu, L. (2022). Ultrahigh-temperature melt printing of multi-principal element alloys (vol 13, 6724, 2022). NATURE COMMUNICATIONS, 13(1), 7382.Springer Nature. doi: 10.1038/s41467-022-35053-3.

Xiong, W., & Hao, L. (2022). Fundamental Issues Identified for Thermodynamic Description of Molten Salt Systems. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 43(6), 894-902.Springer Nature. doi: 10.1007/s11669-022-01018-8.

Xiong, W., To, A., & Klecka, M. (2022). Integrated Computational Materials and Mechanical Modeling for Additive Manufacturing of Alloys with Graded Structure Used in Fossil Fuel Power Plants. Office of Scientific and Technical Information (OSTI). doi: 10.2172/1842580.

Zhang, H., Wang, Y., De Vecchis, R.R., & Xiong, W. (2022). Evolution of carbide precipitates in Haynes? 282 superalloy processed by wire arc additive manufacturing. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 305, 117597.Elsevier. doi: 10.1016/j.jmatprotec.2022.117597.

Zhao, Y., Ratay, J., Li, K., Yamaguchi, H., & Xiong, W. (2022). Effects of Magnetic Abrasive Finishing on the Microstructure and Mechanical Properties of Inconel 718 Processed by Laser Powder Bed Fusion. 202202.0253.v1.MDPI. doi: 10.20944/preprints202202.0253.v1.

Zhao, Y., Ratay, J., Li, K., Yamaguchi, H., & Xiong, W. (2022). Effects of Magnetic Abrasive Finishing on Microstructure and Mechanical Properties of Inconel 718 Processed by Laser Powder Bed Fusion. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 6(2), 43.MDPI. doi: 10.3390/jmmp6020043.

Zhao, Y., Zhang, Q., Xiong, W., & Liangyan, H. (2022). Phase transformations during continuous cooling in Inconel 718 alloys manufactured by laser powder bed fusion and suction casting. MATERIALS CHARACTERIZATION, 185, 111764.Elsevier. doi: 10.1016/j.matchar.2022.111764.

Chen, Q., Zhao, Y., Strayer, S., Zhao, Y., Aoyagi, K., Koizumi, Y., Chiba, A., Xiong, W., & To, A.C. (2021). Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment. ADDITIVE MANUFACTURING, 37, 101642.Elsevier. doi: 10.1016/j.addma.2020.101642.

Hao, L., Ruban, A., & Xiong, W. (2021). CALPHAD modeling based on Gibbs energy functions from zero kevin and improved magnetic model: A case study on the Cr-Ni system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 73, 102268.Elsevier. doi: 10.1016/j.calphad.2021.102268.

Kang, M., Sridar, S., Xiong, W., Wang, J., Yu, J., & Sun, B. (2021). Influence of long-term aging on microstructural stability and performance of DD6 superalloy. MATERIALS SCIENCE AND TECHNOLOGY, 37(6), 607-615.SAGE Publications. doi: 10.1080/02670836.2021.1938837.

Li, K., Klecka, M.A., Chen, S., & Xiong, W. (2021). Wire-arc additive manufacturing and post-heat treatment optimization on microstructure and mechanical properties of Grade 91 steel. ADDITIVE MANUFACTURING, 37, 101734.Elsevier. doi: 10.1016/j.addma.2020.101734.

Li, K., Sridar, S., Tan, S., & Xiong, W. (2021). Effect of homogenization on precipitation behavior and strengthening of 17-4PH stainless steel fabricated using laser powder bed fusion.

Lindwall, G., & Xiong, W. (2021). CALPHAD-Based Methods for Alloy Additive Manufacturing. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 42(1), 3-4.Springer Nature. doi: 10.1007/s11669-021-00870-4.

Lindwall, G., & Xiong, W. (2021). CALPHAD-Based Methods for Alloy Additive Manufacturing (vol 2, pg 3, 2021). JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 42(4), 547.Springer Nature. doi: 10.1007/s11669-021-00907-8.

Sargent, N., Jones, M., Otis, R., Shapiro, A.A., Delplanque, J.P., & Xiong, W. (2021). Integration of Processing and Microstructure Models for Non-Equilibrium Solidification in Additive Manufacturing. METALS, 11(4), 570.MDPI. doi: 10.3390/met11040570.

Sridar, S., Zhao, Y., & Xiong, W. (2021). Phase Transformations During Homogenization of Inconel 718 Alloy Fabricated by Suction Casting and Laser Powder Bed Fusion: A CALPHAD Case Study Evaluating Different Homogenization Models. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 42(1), 28-41.Springer Nature. doi: 10.1007/s11669-021-00871-3.

Wang, C., Zhong, W., Ping, W., Lin, Z., Wang, R., Dai, J., Guo, M., Xiong, W., Zhao, J.C., & Hu, L. (2021). Rapid Synthesis and Sintering of Metals from Powders. ADVANCED SCIENCE, 8(12), 2004229.Wiley. doi: 10.1002/advs.202004229.

Wang, X., Vecchis, R.R.D., Li, C., Sridar, S., Hu, X., Chen, W., & Xiong, W. (2021). Design Strength-Ductility Synergy of Metastable High-Entropy Alloys by Tailoring Unstable Fault Energies.

Zhao, Y., Meng, F., Liu, C., Tan, S., & Xiong, W. (2021). Impact of homogenization on microstructure-property relationships of Inconel 718 alloy prepared by laser powder bed fusion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 826, 141973.Elsevier. doi: 10.1016/j.msea.2021.141973.

Hao, L., & Xiong, W. (2020). An evaluation of the Mn-Ga system: Phase diagram, crystal structure, magnetism, and thermodynamic properties. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 68, 101722.Elsevier. doi: 10.1016/j.calphad.2019.101722.

Hoffman, A., Arivu, M., Wen, H., He, L., Sridharan, K., Wang, X., Xiong, W., Liu, X., He, L., & Wu, Y. (2020). Enhanced Resistance to Irradiation Induced Ferritic Transformation in Nanostructured Austenitic Steels. MATERIALIA, 13, 100806.Elsevier. doi: 10.1016/j.mtla.2020.100806.

Hu, B., Sridar, S., Hao, L., & Xiong, W. (2020). A new thermodynamic modeling of the Ti-V system including the metastable ω phase. INTERMETALLICS, 122, 106791.Elsevier. doi: 10.1016/j.intermet.2020.106791.

Kang, M., Wang, J., Xiong, W., Sridar, S., & Yu, J. (2020). Effect of solution treatment on micropore and mechanical properties of DD6 superalloy. MATERIALS SCIENCE AND TECHNOLOGY, 36(18), 1980-1987.SAGE Publications. doi: 10.1080/02670836.2020.1852679.

Paul, S., Liu, J., Strayer, S.T., Zhao, Y., Sridar, S., Klecka, M.A., Xiong, W., & To, A.C. (2020). A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel. ADDITIVE MANUFACTURING, 36, 101611.Elsevier. doi: 10.1016/j.addma.2020.101611.

Sridar, S., Zhao, Y., & Xiong, W. (2020). Cyclic re-austenitization of copper-bearing high-strength low-alloy steels fabricated by laser powder bed fusion. MATERIALS CHARACTERIZATION, 166, 110437.Elsevier. doi: 10.1016/j.matchar.2020.110437.

Sridar, S., Zhao, Y., Li, K., Wang, X., & Xiong, W. (2020). Post-heat treatment design for high-strength low-alloy steels processed by laser powder bed fusion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 788, 139531.Elsevier. doi: 10.1016/j.msea.2020.139531.

Wang, X., & Xiong, W. (2020). Stacking fault energy prediction for austenitic steels: thermodynamic modeling vs. machine learning. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 21(1), 626-634.Taylor & Francis. doi: 10.1080/14686996.2020.1808433.

Wang, X., & Xiong, W. (2020). Uncertainty quantification and composition optimization for alloy additive manufacturing through a CALPHAD-based ICME framework. NPJ COMPUTATIONAL MATERIALS, 6(1), 188.Springer Nature. doi: 10.1038/s41524-020-00454-9.

Wang, X., Sridar, S., & Xiong, W. (2020). Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 41(6), 804-818.Springer Nature. doi: 10.1007/s11669-020-00828-y.

Zhao, Y., Li, K., Gargani, M., & Xiong, W. (2020). A comparative analysis of Inconel 718 made by additive manufacturing and suction casting: Microstructure evolution in homogenization. ADDITIVE MANUFACTURING, 36, 101404.Elsevier. doi: 10.1016/j.addma.2020.101404.

Zhao, Y., Sargent, N., Li, K., & Xiong, W. (2020). A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization. MATERIALIA, 13, 100835.Elsevier. doi: 10.1016/j.mtla.2020.100835.

Agrawal, A., Saboo, A., Xiong, W., Olson, G., & Choudhary, A. (2019). Martensite Start Temperature Predictor for Steels Using Ensemble Data Mining. 2019 IEEE International Conference on Data Science and Advanced Analytics (DSAA), 00, 521-530.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/dsaa.2019.00067.

Agrawal, A., Saboo, A., Xiong, W., Olson, G., & Choudhary, A. (2019). Martensite Start Temperature Predictor for Steels Using Ensemble Data Mining. 2019 IEEE International Conference on Data Science and Advanced Analytics (DSAA), 00, 521-530.Institute of Electrical and Electronics Engineers (IEEE). doi: 10.1109/dsaa.2019.00067.

Jiang, Z., Chen, W., Xia, Z., Xiong, W., & Fu, Z. (2019). Influence of synthesis method on microstructure and mechanical behavior of Co-free AlCrFeNi medium-entropy alloy. INTERMETALLICS, 108, 45-54.Elsevier. doi: 10.1016/j.intermet.2019.02.006.

Fu, Z., Jiang, L., Wardini, J.L., MacDonald, B.E., Wen, H., Xiong, W., Zhang, D., Zhou, Y., Rupert, T.J., Chen, W., & Lavernia, E.J. (2018). A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength. SCIENCE ADVANCES, 4(10), eaat8712.American Association for the Advancement of Science (AAAS). doi: 10.1126/sciadv.aat8712.

Yan, F., Xiong, W., Faierson, E., & Olson, G.B. (2018). Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion. SCRIPTA MATERIALIA, 155, 104-108.Elsevier. doi: 10.1016/j.scriptamat.2018.06.011.

Zhao, Y., Yang, Y., Lee, C.H., & Xiong, W. (2018). Investigation on Phase Stability of Al_xCo_0.2Cr_0.2Ni_0.2Ti_0.4-x High Entropy Alloys. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 39(5), 610-622.Springer Nature. doi: 10.1007/s11669-018-0651-2.

Wang, P., Xiong, W., Kattner, U.R., Campbell, C.E., Lass, E.A., Kontsevoi, O.Y., & Olson, G.B. (2017). Thermodynamic re-assessment of the Al-Co-W system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 59, 112-130.Elsevier. doi: 10.1016/j.calphad.2017.09.007.

Yan, F., Xiong, W., & Faierson, E.J. (2017). Grain Structure Control of Additively Manufactured Metallic Materials. MATERIALS, 10(11), 1260.MDPI. doi: 10.3390/ma10111260.

Zhou, J., Odqvist, J., Ruban, A., Thuvander, M., Xiong, W., Agren, J., Olson, G.B., & Hedstrom, P. (2017). Effect of solution treatment on spinodal decomposition during aging of an Fe-46.5 at.% Cr alloy. JOURNAL OF MATERIALS SCIENCE, 52(1), 326-335.Springer Nature. doi: 10.1007/s10853-016-0333-6.

Smith, J., Xiong, W., Cao, J., & Liu, W.K. (2016). Thermodynamically consistent microstructure prediction of additively manufactured materials. COMPUTATIONAL MECHANICS, 57(3), 359-370.Springer Nature. doi: 10.1007/s00466-015-1243-1.

Smith, J., Xiong, W., Yan, W., Lin, S., Cheng, P., Kafka, O.L., Wagner, G.J., Cao, J., & Liu, W.K. (2016). Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support. COMPUTATIONAL MECHANICS, 57(4), 583-610.Springer Nature. doi: 10.1007/s00466-015-1240-4.

Xiong, W., & Olson, G.B. (2016). Cybermaterials: materials by design and accelerated insertion of materials. NPJ COMPUTATIONAL MATERIALS, 2(1), 15009.Springer Nature. doi: 10.1038/npjcompumats.2015.9.

Liu, W.K., Cheng, P., Kafka, O.L., Xiong, W., Liu, Z., Yan, W., & Smith, J. (2015). Linking process, structure, and property in additive manufacturing applications through advanced materials modelling. Proceedings of the 8th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2015, 23-39.

Xiong, W. (2015). CALPHAD-Based Integrated Computational Materials Engineering Research for Materials Genomic Design. JOM, 67(8), 1864-1865.Springer Nature. doi: 10.1007/s11837-015-1514-5.

Xiong, W., & Olson, G.B. (2015). Integrated computational materials design for high-performance alloys. MRS BULLETIN, 40(12), 1035-1044.Springer Nature. doi: 10.1557/mrs.2015.273.

Zhou, J., Odqvist, J., Agren, J., Ruban, A., Thuvander, M., Xiong, W., Olson, G.B., & Hedstroem, P. (2015). Direct atom probe tomography observations of concentration fluctuations in Fe-Cr solid solution. SCRIPTA MATERIALIA, 98, 13-15.Elsevier. doi: 10.1016/j.scriptamat.2014.10.035.

Palumbo, M., Burton, B., Costa e Silva, A., Fultz, B., Grabowski, B., Grimvall, G., Hallstedt, B., Hellman, O., Lindahl, B., Schneider, A., Turchi, P.E.A., & Xiong, W. (2014). Thermodynamic modelling of crystalline unary phases. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 251(1), 14-32.Wiley. doi: 10.1002/pssb.201350133.

Xiong, W., Ke, H., Krishnamurthy, R., Wells, P., Barnard, L., Odette, G.R., & Morgan, D. (2014). Thermodynamic models of low-temperature Mn-Ni-Si precipitation in reactor pressure vessel steels. MRS COMMUNICATIONS, 4(3), 101-105.Springer Nature. doi: 10.1557/mrc.2014.21.

Xiong, W., Xie, W., & Morgan, D. (2014). Thermodynamic evaluation of the Np-Zr system using CALPHAD and ab initio methods. JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 569-577.Elsevier. doi: 10.1016/j.jnucmat.2014.06.023.

Xie, W., Xiong, W., Marianetti, C.A., & Morgan, D. (2013). Correlation and relativistic effects in U metal and U-Zr alloy: Validation of ab initio approaches. PHYSICAL REVIEW B, 88(23), 235128.American Physical Society (APS). doi: 10.1103/PhysRevB.88.235128.

Xiong, W., Xie, W., Shen, C., & Morgan, D. (2013). Thermodynamic modeling of the U-Zr system - A revisit. JOURNAL OF NUCLEAR MATERIALS, 443(1-3), 331-341.Elsevier. doi: 10.1016/j.jnucmat.2013.07.034.

Xiong, W., Ågren, J., & Zhou, J. (2012). An Effective Method to Estimate Composition Amplitude of Spinodal Decomposition for Atom Probe Tomography Validated by Phase Field Simulations.

Xiong, W., Chen, Q., Korzhavyi, P.A., & Selleby, M. (2012). An improved magnetic model for thermodynamic modeling. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 39, 11-20.Elsevier. doi: 10.1016/j.calphad.2012.07.002.

Yuan, X., Zhang, L., Du, Y., Xiong, W., Tang, Y., Wang, A., & Liu, S. (2012). A new approach to establish both stable and metastable phase equilibria for fcc ordered/disordered phase transition: application to the Al-Ni and Ni-Si systems. MATERIALS CHEMISTRY AND PHYSICS, 135(1), 94-105.Elsevier. doi: 10.1016/j.matchemphys.2012.04.028.

Tang, Y., Yuan, X., Du, Y., & Xiong, W. (2011). THERMODYNAMIC MODELING OF THE Fe-Zn SYSTEM USING EXPONENTIAL TEMPERATURE DEPENDENCE FOR THE EXCESS GIBBS ENERGY. JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 47(1), 1-10.National Library of Serbia. doi: 10.2298/JMMB1101001T.

Xiong, W., Grönhagen, K.A., Ågren, J., Selleby, M., Odqvist, J., & Chen, Q. (2011). Investigation of Spinodal Decomposition in Fe-Cr Alloys: CALPHAD Modeling and Phase Field Simulation. Solid State Phenomena, 172-174, 1060-1065.Trans Tech Publications. doi: 10.4028/www.scientific.net/ssp.172-174.1060.

Xiong, W., Hedstrom, P., Selleby, M., Odqvist, J., Thuvander, M., & Chen, Q. (2011). An improved thermodynamic modeling of the Fe-Cr system down to zero kelvin coupled with key experiments. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 35(3), 355-366.Elsevier. doi: 10.1016/j.calphad.2011.05.002.

Xiong, W., Xu, H., & Du, Y. (2011). Thermodynamic investigation of the galvanizing systems, II: Thermodynamic evaluation of the Ni-Zn system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 35(3), 276-283.Elsevier. doi: 10.1016/j.calphad.2011.03.003.

Xiong, W., Zhang, H., Vitos, L., & Selleby, M. (2011). Magnetic phase diagram of the Fe-Ni system. ACTA MATERIALIA, 59(2), 521-530.Elsevier. doi: 10.1016/j.actamat.2010.09.055.

Kong, Y., Xiong, W., Guo, H., Sun, W., Du, Y., & Zhou, Y. (2010). Elastic and thermodynamic properties of the Ni-B system studied by first-principles calculations and experimental measurements. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 34(2), 245-251.Elsevier. doi: 10.1016/j.calphad.2010.04.001.

Materials Science International Team, MSIT ®, Xiong, W., Du, Y., Zhang, W., & Xu, H. (2010). Carbon – Tungsten – Zirconium. In Refractory metal systems. 11E3, (pp. 31-47).Springer Nature. doi: 10.1007/978-3-642-00771-2_4.

Xiong, W., Selleby, M., Chen, Q., Odqvist, J., & Du, Y. (2010). Phase Equilibria and Thermodynamic Properties in the Fe-Cr System. CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 35(2), 125-152.Taylor & Francis. doi: 10.1080/10408431003788472.

Chen, H.L., Du, Y., Xu, H., & Xiong, W. (2009). Experimental investigation and thermodynamic modeling of the ternary Al-Cu-Fe system. JOURNAL OF MATERIALS RESEARCH, 24(10), 3154-3164.Springer Nature. doi: 10.1557/JMR.2009.0376.

Materials Science International Team, MSIT®, Du, Y., Xiong, W., Zhang, W., Chen, H., & Sun, W. (2009). Iron – Silicon – Zirconium. In Iron Systems, Part 5. 11D5, (pp. 605-620).Springer Nature. doi: 10.1007/978-3-540-70890-2_29.

Materials Science International Team, MSIT®, Xiong, W., Du, Y., & Zhang, C. (2009). Iron – Silicon – Titanium. In Iron Systems, Part 5. 11D5, (pp. 555-578).Springer Nature. doi: 10.1007/978-3-540-70890-2_27.

Sun, W.H., Du, Y., Kong, Y., Xu, H.H., Xiong, W., & Liu, S.H. (2009). Reassessment of the Ni-B system supported by key experiments and first-principles calculation. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100(1), 59-67.De Gruyter. doi: 10.3139/146.101786.

Xiong, W., Kong, Y., Du, Y., Liu, Z.K., Selleby, M., & Sun, W.H. (2009). Thermodynamic investigation of the galvanizing systems, I: Refinement of the thermodynamic description for the Fe-Zn system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 33(2), 433-440.Elsevier. doi: 10.1016/j.calphad.2009.01.002.

Zhang, W.W., Du, Y., Xu, H., Xiong, W., Kong, Y., Sun, W., Pan, F., & Tang, A. (2009). Thermodynamic Assessment of the Cu-B System Supported by Key Experiment and First-Principles Calculations. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 30(5), 480-486.Springer Nature. doi: 10.1007/s11669-009-9561-7.

Zhang, W.W., Xu, H.H., Liang, J.L., Xiong, W., & Du, Y. (2009). Phase equilibria of the Fe-Ni-Si system at 850°C. JOURNAL OF ALLOYS AND COMPOUNDS, 481(1-2), 509-514.Elsevier. doi: 10.1016/j.jallcom.2009.03.026.

Tang, C., Du, Y., Xu, H.H., Xiong, W., Zhang, L.J., Zheng, F., & Zhou, H.Y. (2008). Experimental investigation of the Al-Ce-Ni system at 800 °C. INTERMETALLICS, 16(3), 432-439.Elsevier. doi: 10.1016/j.intermet.2007.12.003.

Weitzer, F., Xiong, W., Krendelsberger, N., Liu, S., Du, Y., & Schuster, J.C. (2008). Reaction scheme and liquidus surface in the Al-rich section of the Al-Cr-Ni system. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2363-2369.Springer Nature. doi: 10.1007/s11661-008-9579-1.

Xiong, W., Du, Y., Hu, R.X., Wang, J., Zhang, W.W., Nash, P., & Lu, X.G. (2008). Construction of the AlNiSi phase diagram over the whole composition and temperature ranges: thermodynamic modeling supported by key experiments and first-principles calculations. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 99(6), 598-612.De Gruyter. doi: 10.3139/146.101681.

Xiong, W., Du, Y., Zhang, W.W., Sun, W.H., Lu, X.G., & Pan, F.S. (2008). Thermodynamic reassessment of the Cu-Mg-Ni system with brief comments on the thermodynamic modeling of the sub-systems. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 32(4), 675-685.Elsevier. doi: 10.1016/j.calphad.2008.09.010.

Xu, H., Du, Y., Zhou, Y., Zheng, X., Xiong, W., Liu, S., Su, X., & Yin, F. (2008). Phase equilibria of the Al-Ni-Zn system at 340°C. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 99(6), 644-649.De Gruyter. doi: 10.3139/146.101678.

Zhang, C., Du, Y., Xiong, W., Xu, H., Nash, P., Ouyang, Y., & Hu, R. (2008). Thermodynamic modeling of the V-Si system supported by key experiments. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 32(2), 320-325.Elsevier. doi: 10.1016/j.calphad.2007.12.005.

Xiong, W., Du, Y., Lu, X., Schuster, J.C., & Chen, H. (2007). Reassessment of the Ce-Ni binary system supported by key experiments and ab initio calculations. INTERMETALLICS, 15(11), 1401-1408.Elsevier. doi: 10.1016/j.intermet.2007.04.004.

(2006). N-Ti-V (Nitrogen - Titanium - Vanadium). In Landolt-Börnstein - Group IV Physical Chemistry. (pp. 1-10).Springer Berlin Heidelberg. doi: 10.1007/11008514_36.

Pan, Z., Du, Y., Huang, B.Y., Xu, H.H., Liu, Y., Chen, H.L., Xiong, W., & Schmid-Fetzer, R. (2006). Experimental study of the Be-Si phase diagram. JOURNAL OF MATERIALS SCIENCE, 41(8), 2525-2528.Springer Nature. doi: 10.1007/s10853-006-5244-5.

Du, Y., Huang, B.Y., Xu, H.H., Chen, H.L., Pan, Z., Xiong, W., & Gong, W.P. (2004). Thermodynamic and kinetic databases of multicomponent Al-based systems and their application to solidification process. Zhongnan Gongye Daxue Xuebao/Journal of Central South University of Technology, 35(5), 697-701.

Xiong, W., Du, Y., Liu, Y., Huang, B.Y., Xu, H.H., Chen, H.L., & Pan, Z. (2004). Thermodynamic assessment of the Mo-Nb-Ta system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 28(2), 133-140.Elsevier. doi: 10.1016/j.calphad.2004.07.002.

Cu-Ga-Pd (Copper - Gallium - Palladium). In Landolt-Börnstein - Group IV Physical Chemistry. (pp. 1-12).Springer Berlin Heidelberg. doi: 10.1007/10916070_43.

Cu-Pd-Pt (Copper - Palladium - Platinum). In Landolt-Börnstein - Group IV Physical Chemistry. (pp. 1-8).Springer Berlin Heidelberg. doi: 10.1007/10916070_47.

Ce-Ru-Si (Cerium - Ruthenium - Silicon). In Landolt-Börnstein - Group IV Physical Chemistry. (pp. 1-9).Springer Berlin Heidelberg. doi: 10.1007/10916070_42.

Liu, J., Chen, Q., Zhao, Y., Xiong, W., & To, A. (2018). Quantitative Texture Prediction of Epitaxial Columnar Grains in Alloy 718 Processed by Additive Manufacturing. In The Minerals, Metals & Materials Series, 2018-June, (pp. 749-755).Springer Nature. doi: 10.1007/978-3-319-89480-5_49.

Odqvist, J., Zhou, J., Xiong, W., Hedström, P., Thuvander, M., Selleby, M., & Ågren, J. (2012). 3D analysis of phase separation in ferritic stainless steels. In 1st International Conference on 3D Materials Science 2012, 3DMS 2012, (pp. 221-226).Springer Nature. doi: 10.1007/978-3-319-48762-5_34.

Dr. Xiong's personal website

Open positions at Dr. Xiong's Lab

Physical Metallurgy & Materials Design Lab