(2010) Senior Visiting Scientist and Engineer, Westinghouse Electric Company, Research and Technology Unit, Materials Center of Excellence.
(2010) 1st Prize Best Poster Award (meeting-wide), Microscopy & Microanalysis, Portland, OR.
(2008) 1st Prize Best Poster Award in Symposium Z, MRS Spring Meeting, San Francisco, CA.
(2005 - 2007) William Kepler Whiteford Faculty Fellow, School of Engineering, University of Pittsburgh.
(2004) 1st Prize Best Poster Award in Symposium S, MRS Fall Meeting, Boston, MA.
(2004) Invited Keynote Speaker, German Physical Society, Solid-State Physics, Metal Physics Working Group, Spring Meeting 2004 (DPG-Frühlingstagung, Regensburg, Germany).
(2004 - 2009) NCEM Visiting Scientist Fellowship, National Center of Electron Microscopy, Lawrence Berkeley National Laboratory, Berkeley, CA.
(2003) Faculty Honor Roll 2003, MSE Teacher of the Year Award 2003.
(2002) Visiting Professor, Institute of Applied Physics, Swiss Federal Institute of Technology (ETH) Zürich, Zürich, CH-8093.
(2001) The National Science Foundation CAREER Award.
(2000) 1st Prize Best Poster Award in Symposium N, MRS Fall Meeting, Boston, MA.
(2000) 1st Prize Outstanding Poster Award (meeting-wide), MRS Fall Meeting, Boston, MA.
2016 Birks Awar, for best contributed paper presented at Microscopy and Microanalysis 2015, Micro-Analysis Society, July 2016, Columbus, OH, USA..
PhD, Materials Science & Metallurgy, University of Cambridge
MS (Diplom), Physics, University Münster
Alamoudi, M.T., & Wiezorek, J.M.K. (2024). Probing effects of solute trapping on the mechanical properties of α-Al in rapidly solidified hypoeutectic Al-10at.%Cu after surface laser melting. Materials Science and Engineering A, 890, 145934.Elsevier. doi: 10.1016/j.msea.2023.145934.
Liu, Y., Zweiacker, K., Liu, C., McKeown, J.T., & Wiezorek, J.M.K. (2024). Transmission electron microscopy of the rapid solidification microstructure evolution and solidification interface velocity determination in hypereutectic Al-20at.%Cu after laser melting. ACTA MATERIALIA, 263, 119475.Elsevier. doi: 10.1016/j.actamat.2023.119475.
Jo, J., Vishwanadh, B., Shankar, M.R., & Wiezorek, J.M.K. (2023). Microstructure and magnetic properties of binary Mn54-Al46 alloy particulates obtained by severe plastic deformation processing via end-milling and annealing. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 586, 171200.Elsevier. doi: 10.1016/j.jmmm.2023.171200.
Vishwanadh, B., Jo, J., Bonifacio, C.S., & Wiezorek, J.M.K. (2022). Site-specific preparation of plan-view samples with large field of view for atomic resolution STEM and TEM studies of rapidly solidified multi-phase Al-Cu thin films. MATERIALS CHARACTERIZATION, 189, 111943.Elsevier. doi: 10.1016/j.matchar.2022.111943.
Jreidini, P., Pinomaa, T., Wiezorek, J.M.K., McKeown, J.T., Laukkanen, A., & Provatas, N. (2021). Orientation Gradients in Rapidly Solidified Pure Aluminum Thin Films: Comparison of Experiments and Phase-Field Crystal Simulations. Phys Rev Lett, 127(20), 205701.American Physical Society (APS). doi: 10.1103/PhysRevLett.127.205701.
Bathula, V., Liu, C., Zweiacker, K., McKeown, J., & Wiezorek, J.M.K. (2020). Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy. ACTA MATERIALIA, 195, 341-357.Elsevier. doi: 10.1016/j.actamat.2020.04.006.
Gong, S., Wiezorek, J.M.K., & Shankar, M.R. (2020). Large deformability of Mg alloys produced by confinement to the nanoscale in one dimension. Philosophical Magazine Letters, 100(9), 413-424.Taylor & Francis. doi: 10.1080/09500839.2020.1783008.
Idell, Y., Wiezorek, J., Facco, G., Kulovits, A., & Shankar, M.R. (2020). Geometric dynamic recrystallization of austenitic stainless steel through linear plane-strain machining. The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 100(9), 1102-1128.Taylor & Francis. doi: 10.1080/14786435.2020.1725680.
McKeown, J.T., Clarke, A.J., & Wiezorek, J.M.K. (2020). Imaging transient solidification behavior. MRS Bulletin, 45(11), 916-926.Springer Nature. doi: 10.1557/mrs.2020.273.
Pinomaa, T., McKeown, J.M., Wiezorek, J.M.K., Provatas, N., Laukkanen, A., & Suhonen, T. (2020). Phase field modeling of rapid resolidification of Al-Cu thin films. JOURNAL OF CRYSTAL GROWTH, 532, 125418.Elsevier. doi: 10.1016/j.jcrysgro.2019.125418.
Telang, A., Gill, A.S., Zweiacker, K., Liu, C., Wiezorek, J.M.K., & Vasudevan, V.K. (2018). Effect of thermo-mechanical processing on sensitization and corrosion in alloy 600 studied by SEM-and TEM-Based diffraction and orientation imaging techniques. JOURNAL OF NUCLEAR MATERIALS, 505, 276-288.Elsevier. doi: 10.1016/j.jnucmat.2017.07.053.
Wiezorek, J.M., Zou, L., Yang, C., Lei, Y., Zakharov, D., Su, D., Yin, Q., Li, J., Liu, Z., Stach, E., Yang, J., Qi, L., Wang, G., & Zhou, G. (2018). SUPPLEMENTARY INFORMATION Dislocation nucleation facilitated by atomic segregation DOI: 10.1038/NMAT5034. doi: 10.1038/NMAT5034.
Xu, S., Liu, C., & Wiezorek, J. (2018). 20 renewable biowastes derived carbon materials as green counter electrodes for dye-sensitized solar cells. MATERIALS CHEMISTRY AND PHYSICS, 204, 294-304.Elsevier. doi: 10.1016/j.matchemphys.2017.10.056.
Zou, L., Yang, C., Lei, Y., Zakharov, D., Wiezorek, J.M.K., Su, D., Yin, Q., Li, J., Liu, Z., Stach, E.A., Yang, J.C., Qi, L., Wang, G., & Zhou, G. (2018). Dislocation nucleation facilitated by atomic segregation. Nat Mater, 17(1), 56-63.Springer Nature. doi: 10.1038/nmat5034.
Zweiacker, K.W., Liu, C., Gordillo, M.A., McKeown, J.T., Campbell, G.H., & Wiezorek, J.M.K. (2018). Composition and automated crystal orientation mapping of rapid solidification products in hypoeutectic Al-4 at.%Cu alloys. ACTA MATERIALIA, 145, 71-83.Elsevier. doi: 10.1016/j.actamat.2017.11.040.
Stan-Glowinska, K., Litynska-Dobrzynska, L., Kania, B., Dutkiewicz, J., Rogal, L., Skuza, W., Wojewoda-Budka, J., Gordillo, M.A., & Wiezorek, J.M. (2017). Effects of hot-compaction on the structure and properties of Al-Mn-Fe-X alloys strengthened with quasi-crystalline icosahedral phase. MATERIALS & DESIGN, 126, 162-173.Elsevier. doi: 10.1016/j.matdes.2017.04.043.
Stan-Glowinska, K., Litynska-Dobrzynska, L., Morgiel, J., Goral, A., Gordillo, M.A., & Wiezorek, J.M. (2017). Enhanced thermal stability of a quasicrystalline phase in rapidly solidified Al-Mn-Fe-X alloys. JOURNAL OF ALLOYS AND COMPOUNDS, 702, 216-228. doi: 10.1016/j.jallcom.2016.12383.
Stan-Głowińska, K., Lityńska-Dobrzyńska, L., Morgiel, J., Góral, A., Gordillo, M.A., & Wiezorek, J.M. (2017). Enhanced thermal stability of a quasicrystalline phase in rapidly solidified Al-Mn-Fe-X alloys. Journal of Alloys and Compounds, 702, 216-228.Elsevier. doi: 10.1016/j.jallcom.2016.12.383.
Xu, S., Liu, C., Xiao, Z., Zhong, W., Luo, Y., Ou, H., & Wiezorek, J. (2017). Cooperative effect of carbon black and dimethyl sulfoxide on PEDOT:PSS hole transport layer for inverted planar perovskite solar cells. SOLAR ENERGY, 157, 125-132.Elsevier. doi: 10.1016/j.solener.2017.08.009.
Xu, S., Liu, C., Ye, F., Guo, Y., & Wiezorek, J. (2017). Alkali-assisted hydrothermal route to control submicron-sized nanoporous carbon spheres with uniform distribution. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 515, 1-11.Elsevier. doi: 10.1016/j.colsurfa.2016.11.070.
McKeown, J.T., Zweiacker, K., Liu, C., Coughlin, D.R., Clarke, A.J., Baldwin, J.K., Gibbs, J.W., Roehling, J.D., Imhoff, S.D., Gibbs, P.J., Tourret, D., Wiezorek, J.M.K., & Campbell, G.H. (2016). Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing (vol 68, pg 985, 2016). JOM, 68(4), 1264.Springer Nature. doi: 10.1007/s11837-016-1842-0.
McKeown, J.T., Zweiacker, K., Liu, C., Coughlin, D.R., Clarke, A.J., Baldwin, J.K., Gibbs, J.W., Roehling, J.D., Imhoff, S.D., Gibbs, P.J., Tourret, D., Wiezorek, J.M.K., & Campbell, G.H. (2016). Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing. JOM, 68(3), 985-999.Springer Nature. doi: 10.1007/s11837-015-1793-x.
Zweiacker, K., McKeown, J.T., Liu, C., LaGrange, T., Reed, B.W., Campbell, G.H., & Wiezorek, J.M.K. (2016). Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy. JOURNAL OF APPLIED PHYSICS, 120(5), 055106.AIP Publishing. doi: 10.1063/1.4960443.
Huang, Y., Wiezorek, J.M.K., Garner, F.A., Freyer, P.D., Okita, T., Sagisaka, M., Isobe, Y., & Allen, T.R. (2015). Microstructural characterization and density change of 304 stainless steel reflector blocks after long-term irradiation in EBR-II. JOURNAL OF NUCLEAR MATERIALS, 465, 516-530.Elsevier. doi: 10.1016/j.jnucmat.2015.06.031.
McKeown, J.T., Kulovits, A.K., Liu, C., Zweiacker, K., Reed, B.W., LaGrange, T., Wiezorek, J.M.K., & Campbell, G.H. (2014). In situ transmission electron microscopy of crystal growth-mode transitions during rapid solidification of a hypoeutectic Al-Cu alloy. ACTA MATERIALIA, 65, 56-68.Elsevier. doi: 10.1016/j.actamat.2013.11.046.
Okita, T., Etoh, J., Sagisaka, M., Matsunaga, T., Isobe, Y., Freyer, P.D., Huang, Y., Wiezorek, J.M., & Garner, F.A. (2014). Validation of ultrasonic velocity measurements for measuring void swelling in first-wall structural materials. Journal of Fusion Science and Technology, 60(1), 77-82.
Okita, T., Etoh, J., Sagisaka, M., Matsunaga, T., Isobe, Y., Freyer, P.D., Huang, Y., Wiezorek, J.M.K., & Garner, F.A. (2014). VALIDATION OF ULTRASONIC VELOCITY MEASUREMENTS FOR DETECTING VOID SWELLING IN FIRST-WALL STRUCTURAL MATERIALS. FUSION SCIENCE AND TECHNOLOGY, 66(1), 77-82.Taylor & Francis. doi: 10.13182/FST13-755.
Wiezorek, J.M.K., Facco, G., Idell, Y., Kulovits, A., & Shankar, M.R. (2014). Nano-Structuring of 316L Type Steel by Severe Plastic Deformation Processing Using Two-Dimensional Linear Plane Strain Machining. Materials Science Forum, 783-786, 2720-2725.Trans Tech Publications. doi: 10.4028/www.scientific.net/msf.783-786.2720.
Wiezorek, J.M.K., Facco, G., Idell, Y., Kulovits, A., & Shankar, M.R. (2014). Nano-Structuring of 316L Type Steel by Severe Plastic Deformation Processing Using Two-Dimensional Linear Plane Strain Machining. Materials Science Forum, 783-786, 2720-2725.Trans Tech Publications, Ltd. doi: 10.4028/www.scientific.net/msf.783-786.2720.
Ye, C., Telang, A., Gill, A.S., Suslov, S., Idell, Y., Zweiacker, K., Wiezorek, J.M.K., Zhou, Z., Qian, D., Mannava, S.R., & Vasudevan, V.K. (2014). Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 613, 274-288.Elsevier. doi: 10.1016/j.msea.2014.06.114.
Etoh, J., Sagisaka, M., Matsunaga, T., Isobe, Y., Garner, F.A., Freyer, P.D., Huang, Y., Wiezorek, J.M.K., & Okita, T. (2013). Development of a nondestructive inspection method for irradiation-induced microstructural evolution of thick 304 stainless steel blocks. JOURNAL OF NUCLEAR MATERIALS, 440(1-3), 500-507.Elsevier. doi: 10.1016/j.jnucmat.2013.02.036.
Idell, Y., Facco, G., Kulovits, A., Shankar, M.R., & Wiezorek, J.M.K. (2013). Strengthening of austenitic stainless steel by formation of nanocrystalline γ-phase through severe plastic deformation during two-dimensional linear plane-strain machining. SCRIPTA MATERIALIA, 68(9), 667-670.Elsevier. doi: 10.1016/j.scriptamat.2013.01.025.
Sang, X., Kulovits, A., & Wiezorek, J. (2013). Comparison of convergent beam electron diffraction methods for simultaneous structure and Debye Waller factor determination. Ultramicroscopy, 126, 48-59.Elsevier. doi: 10.1016/j.ultramic.2012.12.016.
Sang, X., Kulovits, A., Wang, G., & Wiezorek, J. (2013). Validation of density functionals for transition metals and intermetallics using data from quantitative electron diffraction. Journal of Chemical Physics, 138(084504).
Sang, X., Kulovits, A., Wang, G., & Wiezorek, J. (2013). Validation of density functionals for transition metals and intermetallics using data from quantitative electron diffraction. J Chem Phys, 138(8), 084504.AIP Publishing. doi: 10.1063/1.4792436.
Kulovits, A.K., Facco, G., & Wiezorek, J.M.K. (2012). Grain size determination in nano-scale polycrystalline aggregates by precession illumination-hollow cone dark field imaging in the transmission electron microscope. MATERIALS CHARACTERIZATION, 63, 17-26.Elsevier. doi: 10.1016/j.matchar.2011.10.003.
LaGrange, T., Reed, B.W., Santala, M.K., McKeown, J.T., Kulovits, A., Wiezorek, J.M.K., Nikolova, L., Rosei, F., Siwick, B.J., & Campbell, G.H. (2012). Approaches for ultrafast imaging of transient materials processes in the transmission electron microscope. Micron, 43(11), 1108-1120.Elsevier. doi: 10.1016/j.micron.2012.04.010.
McKeown, J., LaGrange, T., Reed, B., Campbell, G., Kulovits, A., & Wiezorek, J. (2012). Ultrafast Imaging of Rapid Alloy Solidification in Al-Cu Thin Films. Microscopy and Microanalysis, 18(S2), 602-603.Oxford University Press (OUP). doi: 10.1017/s1431927612004862.
Reed, B., LaGrange, T., Santala, M., McKeown, J., DeHope, W., Huete, G., Shuttlesworth, R., Kim, J., Campbell, G., Topuria, T., Raoux, S., Meister, S., Cui, Y., Kilovits, A., Wiezorek, J., Nikolova, L., Kieffer, J., Rosei, F., Stern, M., & Siwick, B. (2012). Latest Developments in Dynamic TEM: Revealing Material Processes at Nanometer and Nanosecond Scales. Microscopy and Microanalysis, 18(S2), 596-597.Oxford University Press (OUP). doi: 10.1017/s1431927612004837.
Reed, B.W., LaGrange, T., Santala, M.K., McKeown, J.T., DeHope, W.J., Huete, G., Shuttlesworth, R.M., Kim, J.S., Topuria, T., Raoux, S., Meister, S., Cui, Y., Kulovits, A., Wiezorek, J.M., Nikolova, L., Stern, M.J., Kieffer, J.C., Siwik, B.J., Rosei, F., & Campbell, G.H. (2012). Latest Developments in Dynamic TEM: Revealing Material Processes at Nanometer and Nanosecond Scales. Microscopy and Microanalysis, 18(Suppl. 2), 596-597.
Sang, X., Kulovits, A., Wang, G., & Wiezorek, J. (2012). High precision electronic charge density determination for L10-ordered γ-TiAl by quantitative convergent beam electron diffraction. PHILOSOPHICAL MAGAZINE, 92(35), 4408-4424.Taylor & Francis. doi: 10.1080/14786435.2012.709324.
Danesh, P., Pantchev, B., Wiezorek, J., Schmidt, B., & Grambole, D. (2011). Effect of hydrogen on hardness of amorphous silicon. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 102(1), 131-135.Springer Nature. doi: 10.1007/s00339-010-6026-0.
Kulovits, A., Wiezorek, J.M.K., LaGrange, T., Reed, B.W., & Campbell, G.H. (2011). Revealing the transient states of rapid solidification in aluminum thin films using ultrafast in situ transmission electron microscopy. PHILOSOPHICAL MAGAZINE LETTERS, 91(4), 287-296.Taylor & Francis. doi: 10.1080/09500839.2011.558030.
Sang, X., Kulovits, A., & Wiezorek, J. (2011). Simultaneous determination of highly precise Debye-Waller factors and multiple structure factors for chemically ordered tetragonal FePd. Acta Crystallogr A, 67(Pt 3), 229-239.International Union of Crystallography (IUCr). doi: 10.1107/S0108767311005617.
Sang, X.H., Kulovits, A., & Wiezorek, J. (2011). Experimental Studies of Bonding Related Properties in Binary Intermetallics by Convergent Beam Electron Diffraction. MRS Advances, 1295(1), 279-284.Springer Nature. doi: 10.1557/opl.2011.37.
Wiezorek, J.M., Kulovits, A.K., Yanar, C., Radmilovic, V., & Soffa, W.A. (2011). "Grain boundary mediated displacive-diffusional formation of tau-phase Mn-Al". Metallurgical and Materials Transactions A, 42(A), 594-604.
Wiezorek, J.M., Kulovits, A.K., Zhang, X.D., & Fraser, H.L. (2011). "Heterophase Interface Slip Transfer in PST-TiAl". Metallurgical and Materials Transactions A, 42(A), 605-612.
Danesh, P., Pantchev, B., Wiezorek, J., & Schmidt, B. (2010). Effect of keV ion irradiation on mechanical properties of hydrogenated amorphous silicon. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 268(17-18), 2660-2665.Elsevier. doi: 10.1016/j.nimb.2010.05.071.
Pantchev, B., Danesh, P., & Wiezorek, J. (2010). Nanoindentation of hydrogenated amorphous silicon. PHILOSOPHICAL MAGAZINE, 90(30), 4027-4039.Taylor & Francis. doi: 10.1080/14786435.2010.502151.
Pantchev, B., Danesh, P., Wiezorek, J., & Schmidt, B. (2010). Nanoindentation-induced pile-up in hydrogenated amorphous silicon. Journal of Physics Conference Series, 253(1), 012054.IOP Publishing. doi: 10.1088/1742-6596/253/1/012054.
Sang, X.H., Kulovits, A., & Wiezorek, J.M.K. (2010). Simultaneous determination of highly precise Debye-Waller factors and structure factors for chemically ordered NiAl. Acta Crystallogr A, 66(Pt 6), 694-702.International Union of Crystallography (IUCr). doi: 10.1107/S0108767310034471.
Sang, X.H., Kulovits, A., & Wiezorek, J.M.K. (2010). Determination of Debye-Waller factor and structure factors for Si by quantitative convergent-beam electron diffraction using off-axis multi-beam orientations. Acta Crystallogr A, 66(Pt 6), 685-693.International Union of Crystallography (IUCr). doi: 10.1107/S010876731003446X.
Kulovits, A., Zhong, R., Wiezorek, J.M.K., & Leonard, J.P. (2009). Electron microscopy of geometrically confined copper thin films after rapid lateral solidification. THIN SOLID FILMS, 517(13), 3629-3634.Elsevier. doi: 10.1016/j.tsf.2008.11.132.
Kulovits, A.K., Deshpande, A.R., & Wiezorek, J.M.K. (2009). Cold-working and annealing of the chemically ordered L10-phase Fe50-Pd50. INTERMETALLICS, 17(10), 865-871.Elsevier. doi: 10.1016/j.intermet.2009.03.015.
Kulovits, A.K., Webler, B., Deshpande, A.R., & Wiezorek, J.M.K. (2009). Electron microscopy of commercial purity Al-2024 (Al-Mg-Cu) after accumulative roll-bonding. TMS Annual Meeting, 63-68.
Ohodnicki, P.R., Desphande, A., Wiezorek, J.M.K., & Klemmer, T.J. (2009). Magnetic force microscopy of combined reaction-processed polycrystalline equiatomic bulk L10 FePd. JOURNAL OF MATERIALS RESEARCH, 24(8), 2677-2687.Springer Nature. doi: 10.1557/JMR.2009.0324.
Wiezorek, J.M.K., & Kulovits, A.K. (2009). TEM of c-component dislocations associated with pyramidal slip activity in hexagonal α
Wiezorek, J.M.K., & Kulovits, A.K. (2009). Observation of <2c+a> dislocation glide in duplex Ti-48at.% Al after room temperature tensile deformation. Materials Research Society Symposium Proceedings, 1128, 141-146.
Zhong, R., Kulovits, A., Wiezorek, J.M.K., & Leonard, J.P. (2009). Four-zone solidification microstructure formed by laser melting of copper thin films. APPLIED SURFACE SCIENCE, 256(1), 105-111.Elsevier. doi: 10.1016/j.apsusc.2009.07.084.
Cai, J., Kulovits, A., Shankar, M.R., & Wiezorek, J. (2008). Novel microstructures from severely deformed Al-Ti alloys created by chip formation in machining. JOURNAL OF MATERIALS SCIENCE, 43(23-24), 7474-7480.Springer Nature. doi: 10.1007/s10853-008-2887-4.
Hur, T., Kim, H., Perello, D., Yun, M., Kulovits, A., & Wiezorek, J. (2008). Morphology and grain structure evolution during epitaxial growth of Ag films on native-oxide-covered Si surface. Journal of Applied Physics, 103(103507), 1-5.
Hur, T.B., Kim, H.K., Perello, D., Yun, M., Kulovits, A., & Wiezorek, J. (2008). Morphology and grain structure evolution during epitaxial growth of Ag films on native-oxide-covered Si surface. Journal of Applied Physics, 103(103507), 1-5.
Hur, T.B., Kim, H.K., Perello, D., Yun, M., Kulovits, A., & Wiezorek, J. (2008). Morphology and grain structure evolution during epitaxial growth of Ag films on native-oxide-covered Si surface. JOURNAL OF APPLIED PHYSICS, 103(10), 103507.AIP Publishing. doi: 10.1063/1.2924323.
Kulovits, A., Mao, S.M., & Wiezorek, J.M. (2008). Comparing the Role of Dislocations during Plastic Deformation of Nanocrystalline Nickel and Coarse-Grained Nickel during Cold Rolling. MRS Advances, 1090, 1090-z05-08.Springer Nature. doi: 10.1557/proc-1090-z05-08.
Kulovits, A., Mao, S.X., & Wiezorek, J.M.K. (2008). Microstructural changes of nanocrystalline nickel during cold rolling. ACTA MATERIALIA, 56(17), 4836-4845.Elsevier. doi: 10.1016/j.actamat.2008.05.040.
Shan, Z., Knapp, J.A., Follstaedt, D.M., Stach, E.A., Wiezorek, J.M.K., & Mao, S.X. (2008). Inter- and intra-agglomerate fracture in nanocrystalline nickel. Phys Rev Lett, 100(10), 105502.American Physical Society (APS). doi: 10.1103/PhysRevLett.100.105502.
Shan, Z., Wiezorek, J.M.K., Knapp, J.A., Follstaedt, D.M., Stach, E.A., & Mao, S.X. (2008). Large lattice strain in individual grains of deformed nanocrystalline Ni. APPLIED PHYSICS LETTERS, 92(9), 091917.AIP Publishing. doi: 10.1063/1.2889936.
Wiezorek, J.M., Kulovita, A.K., & Mao, S.X. (2008). "Microstructural Evolution in nanocrystalline Ni during Cold-Rolling". Acta Materialia, 56(17), 4836-4845.
Zhong, R., Kulovits, A., Wiezorek, J.M.K., & Leonard, J.P. (2008). Texture of rapidly solidified Cu 11 un films studied by SEM EBSD and tem. Ceramic Transactions, 201, 35-45.
(2007). "Cold-working and Annealing of L10-ordering Fe-Pd base intermetallics". Materials Science Forum, 539, 1487-1494.
Desphande, A., & Wiezorek, J. (2007). Cold-deformation and annealing of equiaxed L1
Kulovits, A., Leonard, J., & Wiezorek, J. (2007). Microstructural evolution during post deposition annealing of pulsed laser deposited Fe(100-x) Pdx thin films. Materials Research Society Symposium Proceedings, 980, 155-160.
Kulovits, A.K., Leonard, J.P., & Wiezorek, J.M.K. (2007). Microstructure of pulsed laser deposited FePd thin films on amorphous and crystalline substrates. INTERMETALLICS, 15(12), 1606-1611.Elsevier. doi: 10.1016/j.intermet.2007.06.015.
Ohodnicki, P., Webler, B., Deshpande, A., & Wiezorek, J.M.K. (2007). Interpretation of magnetic force microscopy contrast using commercially available batch tips for investigation of surface magnetic domain structure in polycrystalline bulk equiatomic L10 FePd. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 38A(10), 2479-2487.Springer Nature. doi: 10.1007/s11661-007-9298-z.
Shan, Z.W., Wiezorek, J.M.K., Stach, E.A., Follstaedt, D.M., Knapp, J.A., & Mao, S.X. (2007). Dislocation dynamics in nanocrystalline nickel. Phys Rev Lett, 98(9), 095502. doi: 10.1103/PhysRevLett.98.095502.
Shan, Z.W., Wiezorek, J.M.K., Stach, E.A., Follstaedt, D.M., Knapp, J.A., & Mao, S.X. (2007). Dislocation dynamics in nanocrystalline nickel. PHYSICAL REVIEW LETTERS, 98(9), 095502.American Physical Society (APS). doi: 10.1103/PhysRevLett.98.095502.
Sokalski, V., Kulovits, A., & Wiezorek, J. (2007). UFG to NC FePd by combined reaction transformation mode of severely plastically deformed disordered FePd. Materials Research Society Symposium Proceedings, 980, 167-172.
Zhong, R., Wiezorek, J.M.K., & Leonard, J.P. (2007). Laser-Induced Microstructural Modification of Polycrystalline Cu and Ag Films Encapsulated in SiO2. MRS Advances, 990, 0990-b09-07.Springer Nature. doi: 10.1557/proc-0990-b09-07.
Al-Ghaferi, A., Müllner, P., Heinrich, H., Kostorz, G., & Wiezorek, J.M.K. (2006). Elastic constants of equiatomic L10-ordered FePd single crystals. ACTA MATERIALIA, 54(4), 881-889.Elsevier. doi: 10.1016/j.actamat.2005.10.018.
Deshpande, A.R., & Wiezorek, J.M.K. (2006). Texture evolution in equiaxed polycrystalline L10-ordered FePd during coarsening at 600°C. ZEITSCHRIFT FUR METALLKUNDE, 97(3), 304-309.De Gruyter. doi: 10.3139/146.101255.
Deshpande, A.R., & Wiezorek, J.M.K. (2006). Texture evolution in equiaxed polycrystalline L1
Deshpande, A.R., Blachere, J.R., & Wiezorek, J.M.K. (2006). Texture evolution in combined reaction transformed equiatomic ferromagnetic L10-ordered FePd intermetallics. SCRIPTA MATERIALIA, 54(5), 955-960.Elsevier. doi: 10.1016/j.scriptamat.2005.10.026.
Zhong, R., Wiezorek, J.M.K., & Leonard, J.P. (2006). Microstructural investigation of excimer laser-crystallized metallic thin films. Proceedings of International Meeting on Information Display, 2006, 1739-1743.
Deshpande, A.R., & Wiezorek, J.M.K. (2005). Formation of defect structures during annealing of cold-deformed L1
Deshpande, A.R., & Wiezorek, J.M.K. (2005). Microstructure and defect structure evolution during annealing of equiatomic L1
Shan, Z.W., Stach, E.A., Wiezorek, J.M.K., Knapp, J.A., Follstaedt, D.M., & Mao, S.X. (2005). Response to comment on "grain boundary-mediated plasticity in nanocrystalline nickel". SCIENCE, 308(5720), 356d.American Association for the Advancement of Science (AAAS). doi: 10.1126/science.1107389.
Wiezorek, J.M.K., & Deshpande, A.R. (2005). Coarsening behavior and coercivity in L1
Deshpande, A.R., & Wiezorek, J.M.K. (2004). Magnetic age hardening of cold-deformed bulk equiatomic Fe-Pd intermetallics during isothermal annealing. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 270(1-2), 157-166.Elsevier. doi: 10.1016/j.jmmm.2003.08.013.
Deshpande, A.R., Xu, H., & Wiezorek, J.M.K. (2004). Effects of grain size on coercivity of combined-reaction-processed FePd intermetallics. ACTA MATERIALIA, 52(10), 2903-2911.Elsevier. doi: 10.1016/j.actamat.2004.02.036.
Kulovits, A., Wiezorek, J.M.K., Soffa, W.A., Püschl, W., & Pfeiler, W. (2004). The influence of deformation by cold-work on L10-ordering in anisotropic FePd. JOURNAL OF ALLOYS AND COMPOUNDS, 378(1-2), 285-289.Elsevier. doi: 10.1016/j.jallcom.2003.10.070.
Ohodnicki, P.R., Deshpande, A., & Wiezorek, J.M.K. (2004). Electron and Magnetic Force Microscopy of Bulk Equiatomic Fe-Pd Polycrystals with Equiaxed Microstructure. Microscopy and Microanalysis, 10(S02), 46-47.Oxford University Press (OUP). doi: 10.1017/s1431927604882722.
Shan, Z., Stach, E.A., Wiezorek, J.M.K., Knapp, J.A., Follstaedt, D.M., & Mao, S.X. (2004). Grain boundary-mediated plasticity in nanocrystalline nickel. Science, 305(5684), 654-657. doi: 10.1126/science.1098741.
Shan, Z.W., Stach, E.A., Wiezorek, J.M.K., Knapp, J.A., Follstaedt, D.M., & Mao, S.X. (2004). Grain boundary-mediated plasticity in nanocrystalline nickel. SCIENCE, 305(5684), 654-657.American Association for the Advancement of Science (AAAS). doi: 10.1126/science.1098741.
Wiezorek, J.M., & Deshpande, A.R. (2004). "Magnetic age hardening of cold deformed bulk equiatomic Fe-Pd intermetallics during isothermal annealing". Journal of Magnetism and Magnetic Materials, 270(1/2), 157-166.
Xu, H.P., & Wiezorek, J.M.K. (2004). Transmission electron microscopy of room temperature deformed polytwinned L10-ordered FePd. ACTA MATERIALIA, 52(2), 395-403.Elsevier. doi: 10.1016/j.actamat.2003.09.022.
Deshpande, A., Al-Ghaferi, A., Xu, H., Heinrich, H., & Wiezorek, J.M.K. (2003). Microstructure-Property Evolution in Cold-Worked Equiatomic Fe-Pd During Isothermal Annealing at 500°C. (IEEE Trans. Magn.351999), 129-142.Elsevier. doi: 10.1016/b978-008044373-7/50040-1.
Deshpande, A.R., & Wiezorek, J.M.K. (2003). Magnetic Age-Hardening Response of Combined Reaction Processed Ferromagnetic L1
Deshpande, A.R., Xu, H., & Wiezorek, J.M.K. (2003). Thermo-Mechanical Processing of Hard-Ferromagnetic Fepd-Based Intermetallics. Processing and Fabrication of Advanced Materials XII, 60-74.
Gupta, A., & Wiezorek, J.M.K. (2003). Microstructural evolution of PST-TiAl during low-rate compressive micro-straining at 1023 K in hard and soft orientations. INTERMETALLICS, 11(6), 589-600.Elsevier. doi: 10.1016/S0966-9795(03)00048-7.
Mao, S.X., Han, X.L., & Wiezorek, J.M. (2003). Fracture and cavitation in a constrained thin metal layer under a scale effect in layered materials. PHILOSOPHICAL MAGAZINE, 83(15), 1807-1826.Taylor & Francis. doi: 10.1080/1478643031000078503.
Wiezorek, J.M., Xu, H., & Heinrich, H. (2003). "Microstructural changes during annealing of FePd-based thin films". Intermetallics, 11(9), 589-600.
Wiezorek, J.M.K. (2003). Dislocation and twin interactions with polytwin interfaces in L10-ordered FePd. INTERMETALLICS, 11(1), 9-21.Elsevier. doi: 10.1016/S0966-9795(02)00169-3.
Xu, H.P., Heinrich, H., & Wiezorek, J.M.K. (2003). Microstructural changes during annealing of FePd-based thin films. INTERMETALLICS, 11(9), 963-969.Elsevier. doi: 10.1016/S0966-9795(03)00100-6.
(2002). "Massive Transformation and the Formation of Ferromagnetic L10 Phase in Manganese-Aluminum-Base Alloys". Metallurgical and Materials Transactions A, 33(A 8), 2413-2423.
Xu, H., Wise, A.T., Klemmer, T.J., & Wiezorek, J.M.K. (2002). Characterization of the order-annealing response of nanostructured iron-paladium based ferromagnetic thin-films. Materials Research Society Symposium - Proceedings, 703, 105-110.
Yanar, C., Radmilovic, V., Soffa, W.A., & Wiezorek, J.M.K. (2001). Evolution of microstructure and defect structure in L10-ordered manganese aluminide permanent magnet alloys. INTERMETALLICS, 9(10-11), 949-954.Elsevier. doi: 10.1016/S0966-9795(01)00095-4.
Yanar, C., Radmilovic, V., Soffa, W.A., & Wiezorek, J.M.K. (2001). Genesis of defects in massively transformed L1
Wiezorek, J.M., DeLuca, P.M., & Fraser, H.L. (2000). "Mechanisms of Plasticity and Fracture in Partially Lamellar TiAl at Room and Elevated Temperature". Intermetallics, 8(2), 99-113.
Wiezorek, J.M.K., DeLuca, P.M., & Fraser, H.L. (2000). Mechanisms of plasticity and fracture of partially lamellar titanium aluminum. INTERMETALLICS, 8(2), 99-113.Elsevier. doi: 10.1016/S0966-9795(99)00072-2.
Zhang, X.D., Grensing, F.C., Meisenkothen, F., Wiezorek, J.M.K., Meyrick, G., & Fraser, H.L. (2000). Microstructural characterization of novel in-situ Al-Be composites. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 31(11), 2963-2971.Springer Nature. doi: 10.1007/BF02830343.
Zhang, X.D., Wiezorek, J.M.K., Baeslack, W.A., Evans, D.J., & Fraser, H.L. (1999). On the stability of ω phase in Ti-6-22-22S and Ti-6-4 alloys. SCRIPTA MATERIALIA, 41(6), 659-665.Elsevier. doi: 10.1016/S1359-6462(99)00111-6.
Zhang, X.D., Wiezorek, J.M.K., Kaufman, M.J., Loretto, M.H., & Fraser, H.L. (1999). Planar defects in massively transformed Ti-Al alloys. PHILOSOPHICAL MAGAZINE LETTERS, 79(8), 519-530.Taylor & Francis. doi: 10.1080/095008399176887.
Lienert, T.J., Wiezorek, J.M.K., Fraser, H.L., & Baeslack, W.A. (1998). TEM Characterization of Microstructures in Laser Beam Welds on A356/SiC/15p. ASM Conference Proceedings: Joining of Advanced and Specialty Materials, 117-126.
Lienert, T.J., Wiezorek, J.M.K., Fraser, H.L., & Baeslack, W.A. (1998). Microstructures and Mechanical Properties of Inertia-Friction Welds on 8009/SiC/11p. ASM Conference Proceedings: Joining of Advanced and Specialty Materials, 107-115.
Wiezorek, J.M., Zhang, X.D., Clark, W.A., & Fraser, H.L. (1998). "Activation of Slip in Lamellae of a2-Ti3Al in TiAl Alloys". Philosophical Magazine A, 46(1), 217-238.
Wiezorek, J.M., Zhang, X.D., Godfrey, A., Hu, D., Loretto, M.H., & Fraser, H.L. (1998). "Deformation Behavior of a2-Lamellae in Fully Lamellar Ti-48Al-2Mn-2Nb at Room Temperature". Scripta Materialia, 38(3), 811-817.
Wiezorek, J.M.K., & Fraser, H.L. (1998). Interaction of dislocations and interstitial solute in γ-TiAl. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 77(3), 661-674.Taylor & Francis. doi: 10.1080/01418619808224075.
Wiezorek, J.M.K., Zhang, X.D., Clark, W.A.T., & Fraser, H.L. (1998). Activation of slip in lamellae of alpha2-Ti3Al in TiAl alloys. The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 78(1), 217-238.Taylor & Francis. doi: 10.1080/014186198253778.
Wiezorek, J.M.K., Zhang, X.D., Clark, W.A.T., & Fraser, H.L. (1998). Activation of slip in lamellae of α2-Ti3Al in TiAl alloys. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 78(1), 217-238.Taylor & Francis. doi: 10.1080/01418619808244810.
Wiezorek, J.M.K., Zhang, X.D., Godfrey, A., Hu, D., Loretto, M.H., & Fraser, H.L. (1998). Deformation behavior of A2-lamellae in fully lamellar Ti-48Al-2Mn-2Nb at room temperature. SCRIPTA MATERIALIA, 38(5), 811-817.Elsevier. doi: 10.1016/S1359-6462(97)00538-1.
Zhang, X.D., Wiezorek, J.M.K., Baeslack, W.A., Evans, D.J., & Fraser, H.L. (1998). Precipitation of ordered α2 phase in Ti–6–22–22 alloy. Acta Materialia, 46(13), 4485-4495.Elsevier. doi: 10.1016/s1359-6454(98)00158-x.
Zhang, X.D., Wiezorek, J.M.K., Baeslack, W.A., Evans, D.J., & Fraser, H.L. (1998). Precipitation of ordered α2 phase in Ti-6-22-22 alloy. ACTA MATERIALIA, 46(13), 4485-4495.Elsevier BV. doi: 10.1016/S1359-6454(98)00158-X.
Fischione, P.E., Ringnada, J., Feng, Y., Krekels, T., Hayies, M., Colijn, H.O., Mills, M.J., & Wiezorek, J.M. (1997). The Use of a Cold Gas Plasma for the Final Processing of Contamination-Free Tem Specimens. MRS Advances, 480, 225.Springer Nature. doi: 10.1557/proc-480-225.
Mills, M.J., Wiezorek, J.M.K., & Fraser, H.L. (1997). HRTEM studies of dislocations and interfaces in TiAl. Materials Research Society Symposium - Proceedings, 466, 131-138.
Wiezorek, J.M.K., DeLuca, P.M., Mills, M.J., & Fraser, H.L. (1997). Deformation mechanisms in a binary Ti-48 at.%Al alloy with lamellar microstructure. PHILOSOPHICAL MAGAZINE LETTERS, 75(5), 271-280.Taylor & Francis. doi: 10.1080/095008397179525.
Wiezorek, J.M.K., Humphreys, C.J., & Fraser, H.L. (1997). Determining directly from experiment the magnitude of the Burgers vector of glissile
Wiezorek, J.M.K., Mills, M.J., & Fraser, H.L. (1997). Deformation and fracture characteristics in TiAl at room temperature and 800 degrees C. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 234(A234-236), 1106-1109.Elsevier. doi: 10.1016/S0921-5093(97)00343-2.
Wiezorek, J.M.K., Zhang, X.D., Clark, W.A.T., & Fraser, H.L. (1997). Shear transmission in lamellar Ti-48at.%Al. Materials Research Society Symposium - Proceedings, 460, 231-236.
Zhang, X.D., Wiezorek, J.M.K., Baeslack, W.A., Evans, D.J., & Fraser, H.L. (1997). Characterization of α
Zhang, X.D., Wiezorek, J.M.K., Kaufman, M.J., Loretto, M.H., & Fraser, H.L. (1997). TEM characterization of planar defects in a massively transformed TiAl alloy. Materials Research Society Symposium - Proceedings, 460, 213-218.
Zhang, X.D., Wiezorek, J.M.K., Meyrick, G., Grensing, F.C., & Fraser, H.L. (1997). Microstructural characterization and mechanical behaviour of novel in-situ Be-Al composites. TMS Annual Meeting, 247-254.
Banerjee, R., Swaminathan, S., Wiezorek, J.M.K., Wheeler, R., & Fraser, H.L. (1996). Crystallization of amorphous phase in sputter-deposited Ti-Al alloy thin films. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 27(7), 2047-2050.Springer Nature. doi: 10.1007/BF02651954.
Swaminathan, S., Wiezorek, J.M.K., Zaluzec, N.J., Jones, I.P., Maher, D.M., & Fraser, H.L. (1995). Factors affecting the accuracy of structure factor measurements in TiAl. ELECTRON MICROSCOPY AND ANALYSIS 1995, 147, 133-136.
WIEZOREK, J.M.K., & HUMPHREYS, C.J. (1995). ON THE HIERARCHY OF PLANAR FAULT ENERGIES IN TIAL. SCRIPTA METALLURGICA ET MATERIALIA, 33(3), 451-458.Elsevier. doi: 10.1016/0956-716X(95)00212-E.
Wiezorek, J.M.K., Botton, G., Humphreys, C.J., & Fraser, H.L. (1995). A TEM study of dislocation decoration in gamma-TiAl. ELECTRON MICROSCOPY AND ANALYSIS 1995, 147, 515-518.
Wiezorek, J.M.K., Court, S.A., & Humphreys, C.J. (1995). On the dissociation of prism plane superdislocations in Ti3Al. PHILOSOPHICAL MAGAZINE LETTERS, 72(6), 393-403.Taylor & Francis. doi: 10.1080/09500839508242479.
Wiezorek, J.M.K., Court, S.A., & Humphreys, C.J. (1995). Experimental TEM and image simulation of 〈a〉 dislocations in Ti
Wiezorek, J.M., Preston, A.R., Court, S.A., Fraser, H.L., & Humphreys, C.J. (1994). "Burgers Vector Determination of Decorated Dislocations in y-TiAl by Diffraction Contrast and LACBED". Philosophical Magazine A, 69(2), 285-299.
WIEZOREK, J.M.K., PRESTON, A.R., COURT, S.A., FRASER, H.L., & HUMPHREYS, C.J. (1994). BURGERS VECTOR DETERMINATION OF DECORATED DISLOCATIONS IN GAMMA-TIAL BY DIFFRACTION CONTRAST AND LARGE-ANGLE CONVERGENT-BEAM ELECTRON-DIFFRACTION. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 69(2), 285-299.Taylor & Francis. doi: 10.1080/01418619408244344.
Wiezorek, J.M.K. (1993). `Optimization' of imaging conditions for weak beam studies of dislocation core structures in Ti
WIEZOREK, J.M.K., & HUMPHREYS, C.J. (1993). DETERMINATION OF STACKING-FAULT ENERGIES OF THE INTERMETALLIC TI-52AT-PERCENT AL. ELECTRON MICROSCOPY AND ANALYSIS 1993, (138), 445-448.
DRYZEK, J., WIEZOREK, J., WOLLSCHLAGER, S., LEKKI, J., GOTTDANG, A., & CLEFF, B. (1991). STUDIES OF POINT-DEFECTS AND TRIBOLOGICAL PROPERTIES OF NITROGEN-IMPLANTED STAINLESS-STEEL. MATERIALS LETTERS, 12(1-2), 16-20.Elsevier. doi: 10.1016/0167-577X(91)90049-C.
Wiezorek, J.M., Bathula, V., & Khanal, S. (2018). HREM and Analytical TEM of Rapidly Solidified Microstructure Evolved at the Extremes of the Coupled Grystal Growth Regime in Hypo-Eutectic Al-Cu Alloys. In Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada.Cambridge University Press (CUP).Baltimore, MD.
Idell, Y., & Wiezorek, J.M.K. (2015). Microstructural evolution of severely plastically deformed austenitic stainless steel using precession electron diffraction. In PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, (pp. 715-716).
Wiezorek, J., Zweiacker, K., Liu, C., Gordillo, M., McKeown, J., Campbell, G., La Grange, T., Reed, B., & Wiezorek, J.M. (2015). Quantitative Phase Analysis of Rapid Solidification Products in Al-Cu Alloys by Automated Crystal Orientation Mapping in the TEM. In Microscopy and Microanalysis, 21 S3, (pp. 1459-1460).Cambridge University Press (CUP).Portland.
Idell, Y., & Wiezorek, J. (2014). Precession Electron Diffraction based TEM Studies of Microstructure Evolution in Severely Plastically Deformed Austenitic Stainless Steel. In Microscopy and Microanalysis, 20(S3), (pp. 1446-1447).Oxford University Press (OUP). doi: 10.1017/s1431927614008964.
McKeown, J.T., Zweiacker, K., LaGrange, T., Reed, B.W., Liu, C., Wiezorek, J.M., & Campbell, G.H. (2014). Rapid Solidification in Thin-Film Al-Cu Alloys: Capturing the Dynamics with Time-Resolved In Situ TEM. In Microscopy and Microanalysis, 20(S3), (pp. 1580-1581).Oxford University Press (OUP). doi: 10.1017/s1431927614009635.
Sang, X., Kulovits, A.K., Wang, G., & Wiezorek, J.M. (2014). Charge Density Determination for Al-rich Composition L1o-ordered gamma-TiAl by Convergent Beam Electron Diffraction. In Microscopy and Microanalysis, 20(S3), (pp. 1492-1493).Oxford University Press (OUP). doi: 10.1017/s1431927614009192.
Wiezorek, J., Huang, Y., Garner, F., Freyer, P., Sagisaka, M., Isobe, Y., & Okita, T. (2014). Transmission Electron Microscopy of 304-type Stainless Steel after Exposure to Neutron Flux and Irradiation Temperature Gradients. In Microscopy and Microanalysis, 20(S3), (pp. 1822-1823).Oxford University Press (OUP). doi: 10.1017/s1431927614010848.
Wiezorek, J.M., McKeown, J.T., Zweiacker, K., LaGrange, T., Reed, B.W., Liu, C., & Campbell, G.H. (2014). Capturing Dynamics of Pulsed Laser Induced Melting and Rapid Solidification in Aluminum Polycrystals with Nanoscale Temporal Resolution In-situ TEM. In Microscopy and Microanalysis, 20(S3), (pp. 1582-1583).Oxford University Press (OUP). doi: 10.1017/s1431927614009647.
Zweiacker, K., Liu, C., McKeown, J.T., LaGrange, T., Reed, B.W., Campbell, G.H., & Wiezorek, J.M. (2014). Crystal Growth Mode Changes during Pulsed Laser Induced Rapid Solidification in Nanoscale Thin Films of Al-Cu Eutectic. In Microscopy and Microanalysis, 20(S3), (pp. 1662-1663).Oxford University Press (OUP). doi: 10.1017/s1431927614010046.
Wiezorek, J.M.K., Kulovits, A., Zhang, X.D., & Fraser, H.L. (2011). Slip Transfer Across Hetero-Interfaces in Two-Phase Titanium Aluminum Intermetallics. In METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(3), (pp. 605-612).Springer Nature. doi: 10.1007/s11661-010-0332-1.
Wiezorek, J.M.K., Kulovits, A.K., Yanar, C., & Soffa, W.A. (2011). Grain Boundary Mediated Displacive-Diffusional Formation of τ-Phase MnAl. MS&T 2009.Pittsburgh, PA. doi: 10.1007/s11661-010-0308-1.
Palm, M., Bewlay, B.P., He, Y.H., Takeyama, M., & Wiezorek, J.M.K. (2009). Materials Research Society Symposium Proceedings: Preface. In Materials Research Society Symposium Proceedings, 1128.
Yao, L., Henein, H., Apte, P., & Collins, L. (2008). Processing and properties of a Ni-ZrO2P/M composite. TMS Fall Meeting 1998.Rosemont, IL.
Wiezorek, J., Chong, L.F., Takeyama, M., Morris, D., & Clemens, H. (2007). Materials Research Society Symposium Proceedings: Preface. In Materials Research Society Symposium Proceedings, 980.
Wiezorek, J.M.K. (2007). Cold-Working and Annealing of L1<sub>0</sub>-Ordering Iron-Palladium Base Intermetallics. In Materials Science Forum, 539-543(PART 2), (pp. 1487-1494).Trans Tech Publications Ltd. doi: 10.4028/0-87849-428-6.1487.
Kulovits, A., Leonard, J., & Wiezorek, J. (2006). Influence of Processing Parameters on Microstructure of Pulsed Laser Deposited Au Thin Films. In MRS Advances, 979, (p. 0979-hh11-20).Springer Nature. doi: 10.1557/proc-979-0979-hh11-20.
Huang, O., Bandyopadhyay, A., & Bose, S. (2005). Influence of processing parameters on PZT thick films. MRS Fall Meeting 2006.Boston, MA. doi: 10.1016/j.mseb.2004.09.005.
Wiezorek, J.M.K., Yanar, C., Stach, E.A., & Radmilovic, V. (2005). Hybrid displacive-diffusional transformation in manganese-aluminum base alloys. In Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005, 1, (pp. 523-528).
Wiezorek, J.M.K., Zhang, X.D., & Fraser, H.L. (2004). Slip Transfer across Hetero-Interfaces in two-phase Titanium Aluminum Intermetallics. In MRS Advances, 821, (p. p4.5/n4.5).Springer Nature. doi: 10.1557/proc-821-p4.5/n4.5.
Wiezorek, J.M.K., Zhang, X.D., & Fraser, H.L. (2004). Slip Transfer across Hetero-Interfaces in two-phase Titanium Aluminum Intermetallics. In MRS Advances, 819(1), (p. 45).Springer Nature. doi: 10.1557/proc-819-n4.5/p4.5.
Xu, H., & Wiezorek, J. (2003). Interactions of Mechanical Twinning and Dislocation Glide with Polytwin-Interfaces in L1o-Ordered Iron-Palladium Intermetalllcs. MRS Fall Meeting.Boston, MA.
Yanar, C., Wiezorek, J.M.K., Radmilovic, V., & Soffa, W.A. (2002). Massive transformation and the formation of the ferromagnetic L10 phase in manganese-aluminum-based alloys. TMS Fall Meeting 2000.St. Louis, MO. doi: 10.1007/s11661-002-0363-3.
Wiezorek, J.M.K., Zhang, X.D., & Fraser, H.L. (2000). Dislocation interactions with lamellar grain boundaries in titanium aluminum intermetallics. In Materials Research Society Symposium - Proceedings, 578, (pp. 383-388).
Wiezorek, J.M.K., Mills, M.J., & Fraser, H.L. (1998). Manifestations of dislocation-solute effects in aluminum-rich titanium-aluminum intermetallics. In Proceedings of the TMS Fall Meeting, (pp. 211-225).
Wiezorek, J.M.K., Preston, A.R., & Humphreys, C.J. (1995). Column approximation effects on partial dislocation weak beam images. In ELECTRON MICROSCOPY AND ANALYSIS 1995, 147, (pp. 455-458).
WIEZOREK, J.M.K. (1993). OPTIMIZATION OF IMAGING CONDITIONS FOR WEAK-BEAM STUDIES OF DISLOCATION CORE STRUCTURES IN TI3AL. In JOURNAL DE PHYSIQUE IV, 3(C7), (pp. 435-440).EDP Sciences. doi: 10.1051/jp4:1993767.
TANNER, L.E., & JACOBSON, L.A. (1985). PRECIPITATION IN COPPER-ALLOYS. 46th International Field Emission Symposium, IFES2000.Pittsburgh, PA.